0:00
Hello friends welcome to Solid Works
0:02
tutorial and in this tutorial we will
0:04
model this index guide as you can see
0:07
that I have already model it as per the
0:09
isometric drawing and this is the very
0:12
simple tutorial designed for the
0:13
beginner user of a solid works those who
0:15
have just started learning so I will
0:17
close this file and create a new file
0:20
and show you from the scratch how you
0:22
can do the same in solid
0:24
works you can also visit my website macn
0:27
nexus.com and you can can visit this
0:31
solid works tutorials tab where I have
0:34
written so many tutorials on solid works
0:38
where you can follow the step by step
0:43
parts if you like my method of teaching
0:46
then you can also support me on kofi.com
0:49
you can buy me a cup of coffee your
0:53
small support will help these channels
0:55
to grow and it will motivate me to
0:58
create more awesome content on solid
1:00
works so let's come back to our
1:05
tutorial so here I have created a new
1:08
file and if you see the shape of our
1:11
part then we can see that uh our major
1:14
features comes on a Top Lane so we will
1:17
select this Top Lane and click on the
1:19
sketch so first thing which we will do
1:27
diameter 2 in so here first we will
1:30
change our unit to the inch you can also
1:33
go to the unit section here under
1:37
setting and you can customize your units
1:41
so now I will again edit my sketch and
1:44
this uh Inner Circle which will be the
1:47
construction one will have the diameter
2:00
we will create a three-point
2:06
Arc and this Arc will have the vertical
2:10
relation with the origin at the vertical
2:14
relation and from Center to center it is
2:24
1.75 and this radius is of
2:34
and we will also create a three-point
2:40
here and merge the center with
2:49
merge and this is the radiat of 1.5 in
2:54
select the dimension and give it 1.5
3:07
and we will move it and similar type we
3:11
will do it on the right hand
3:16
arc and select this and
3:23
merch and select this two Arc and uh
3:31
now we will create a three-point
3:35
arc on left hand side and one is on
3:42
side select this and this and uh add the
3:49
tangent similarly add the tangent
3:53
here and do the same process on the left
4:00
tangent and select this and this and add
4:05
the tangent now select this two Arc and
4:15
Dimension and this is of radius of
4:31
we will create a rough
4:45
profile and here we will add the two
4:47
fillets so click on the
5:11
now from the origin to this
5:44
in and from Center it will be 1
6:00
is our uh sketch is fully constrained
6:02
and now we will come out of
6:09
it select the sketch click on
6:13
extrude and add the Extrusion of uh
6:24
now we will select this bottom face and
6:39
rectangle select this and this and add
7:02
and add the Extrusion of a 3
7:06
in select the sketch click on
7:13
reverse and give the value 3 in click on
7:22
7 now here we will add the radius of a 1
7:25
in so select the fillet
7:31
going give the value 1
7:39
okay and now we will create this cut so
7:43
for this we will select the phase and
7:47
sketch and move to the top select the
7:51
circle and create a circle of a 2 in
8:06
now we will come out of the sketch
8:10
sketch and click on exud
8:15
Cut and uh we will say it through all
8:24
okay now press Ctrl 7 for isometric and
8:29
we will create create this hole so we
8:30
will select this phase and click on the
8:33
sketch make this phase
8:36
normal select the circle and point
8:39
pencil to the radius so we can get the
8:41
center points now create a
8:44
circle and this is of
9:05
it select the sketch click on exclude
9:10
cut and from here say through
9:20
now we will uh create this
9:23
slot so we will first place our model to
9:26
the isometric and select this pH and
9:30
and make this phase normal now select
9:43
slot and select smart
9:49
Dimension slot width of uh
9:59
Center is of 1 in from Center to
10:19
it and we will select the sketch click
10:24
Cut and from here we will say true all
10:33
now we will create this cut here so for
10:36
this we will select this phase and click
10:38
on the sketch and we will make this top
10:41
phase normal and uh we will select the
10:45
inner diameter and click on convert
10:47
entities and uh make it for the
10:51
construction select the line
10:56
and create a line and make it a
11:03
construction and this is of a 15° so we
11:12
line now uh make it a construction smart
11:19
Dimension and uh give it an angle of
11:25
15° and now this is of a 26
11:33
so we will create two
11:42
line and this both the line will be
11:44
parallel to this construction line of a
11:48
15° so first we will select this and
11:51
this and add the parallel and now select
11:56
this and this and add the parallel
12:00
now select the inner and outer click on
12:09
entities select this and click on
12:13
convert and here it is already there so
12:21
now we will trim the unnecessary
12:23
geometry which is not required so we
12:26
will trim this this this
12:30
this this and this now select smart
12:36
Dimension and uh we will add the
13:04
center so we will delete
13:21
Dimension now our sketch is fully
13:24
constrained we will close
13:27
it select the skage click on extrude
13:34
Cut and now here we will select this
13:38
profile in fact here is an extra
13:41
geometry which we have to
13:51
it now come out of the
13:55
sketch select the sketch click on
14:01
and from here say through all say
14:06
okay now press contrl 7 for isometric
14:09
View and you can see that we have
14:12
successfully modeled this index guide in
14:14
solid works and this tutorial is
14:16
designed for the beginner user those who
14:18
have just started learning the part
14:20
modeling in solid works and uh if you
14:23
like this tutorial then please like
14:24
subscribe and share my channel and also
14:26
support me on ai.com your small support
14:29
will help these channels to grow and it
14:31
will motivate me to create more awesome
14:33
and useful tutorials on solid works you
14:36
can find Link in the video descriptions
14:39
so this is all about this part modeling
14:41
tutorial thank you for watching and
14:43
thank you for your valuable time
