0:01
Hello friends welcome to Solid Works
0:02
tutorial and in this tutorial we will
0:04
model this cover with respect to our
0:07
drawing and you can see that uh I have
0:10
already made it and I will show you from
0:13
the scratch how you can do the same in
0:15
solid works so I will close this file
0:19
file you can also visit my website macn
0:23
nexus.com and you can visit this solid
0:27
works tutorials tab where I have a WR so
0:31
many tutorials on solid works where you
0:34
can follow the step byst step guide to
0:39
parts if you like my method of teaching
0:42
then you can also support me on kofi.com
0:45
you can buy me a cup of coffee your
0:49
small support will help these channels
0:51
to grow and it will motivate me to
0:54
create more awesome content on solid
0:56
works so let's come back to our tutorial
1:01
so here I have created a new file now I
1:03
will select the right plane and click on
1:06
sketch and we will create a
1:14
rectangle and then we will select the
1:21
tool and we will click on the trim
1:27
geometries and we will create create a
1:33
line select it and uh make it for
1:37
construction and select this point and
1:42
point and add the vertical
1:45
relation select smart Dimension and
1:48
select outer one and give the diameter
1:55
114 and this diameter is of
2:04
50 and this thickness is of uh 4
2:09
mm and this is also 4
2:17
mm and uh select smart Dimension and
2:26
mm and now our sketch is fully construed
2:30
in we will come out of
2:33
it and select the Revol
2:40
360° and now we will select this
2:44
interface and click on the
2:47
sketch we will press the control
2:58
line and make this phase
3:01
normal and make this line
3:07
construction and now we will uh select
3:14
circle and give it a diameter of
3:26
and make it for the construction
3:31
select this point and this diameter and
3:38
now we will select this outer geometry
3:45
entities and we will create a circle of
3:56
20 and now we will uh remove the
3:59
unnecessary geometry by using the trim
4:05
option so first we will trim this this
4:09
and our sketch is fully
4:15
constrained so we will come out of it
4:21
extrude and from here select up to
4:24
surface and select this outer surface
4:30
and now we will create a 3mm fillet so
4:40
age and this age and give the fillet off
4:51
now we will create a whole of 5.2 so we
4:55
will select this phase and click on the
5:00
we will make this phase normal select
5:05
circle and create a circle
5:09
and give it a diameter of
5:17
5.2 now click on extrud
5:21
Cut and from here say it true all say
5:31
we will use the polar pattern select
5:34
the circular pattern and in the form of
5:37
AIS select this inner
5:48
features select this exclude fill
5:57
and click on okay okay so you can see
6:01
that it got a circular
6:04
pattern and now we will select this
6:07
phase and click on sketch press crl 7
6:11
and now we will select this outer age
6:15
and click on the convert entities and
6:31
uh give it a diameter of
6:40
12 make this phase normal and now we
6:44
will select the Treepoint
6:50
arc similarly select a three-point
6:54
Arc create an arc and
6:58
now I will select this and this and add
7:03
tangent similarly this Arc and this Arc
7:10
tangent similarly this and this and add
7:16
tangent select this and this and add
7:23
tangent and select this two Arc and add
7:30
select smart Dimension and give this uh
7:40
now we will select this diameter and
7:43
click on for the construction and make
7:48
normal and now we will select a
7:50
three-point Arc and create an
7:56
equal to the our Construction now we
8:00
will use the trim geometry trim the
8:05
geometry now we will come out of the
8:19
Cut and create a cut off 8
8:25
okay so first we have added the material
8:30
and then we have created this
8:32
cut and now we will select this cut and
8:37
go with circular pattern in axis I will
8:43
interface and quantity I13 click on
8:51
okay now here is a three
8:54
holes so I will select this phase and
8:58
sketch make this phas
9:01
normal select the circle create a circle
9:05
and uh give it a diameter of
9:23
construction and select the
9:27
circle create a circle select smart
9:31
Dimension and give it 12
9:39
it select the sketch and uh click on
9:54
now we will create a hole select the
10:00
right click and click on the
10:04
sketch make this phase normal select the
10:15
and do the diameter of
10:22
4.75 come out of the
10:25
sketch select the sketch click on
10:36
okay now we will use the polar
10:39
pattern go to the pattern options select
10:43
circular and from here select the
10:49
features from the drop down we will
10:55
this boss and this quot
11:04
okay so you can see that we have a
11:07
successfully model this cover from
11:10
scratch in solid works and I hope you
11:12
have enjoyed this tutorial if you have
11:14
enjoyed it then please like subscribe
11:17
and share my channel and you can also
11:19
buy me a cup of coffee link is given in
11:22
your video description your small
11:23
support will help this channels to grow
11:25
and it will motivate me to create more
11:28
awesome content content on solid works
11:31
thank you for watching and thank you for
