0:00
Hello friends welcome to Solid Works
0:02
tutorial and in this tutorial we will
0:05
learn the whole feature in solid works
0:07
for this we will create a simple plate
0:11
you can also visit my website macn
0:13
nexus.com and you can visit this solid
0:17
works tutorials tab where I have written
0:21
so many tutorials on solid works where
0:24
you can follow the stepbystep guide to
0:30
if you like my method of teaching then
0:32
you can also support me on kofi.com you
0:36
can buy me a cup of coffee your small
0:40
support will help these channels to grow
0:42
and it will motivate me to create more
0:45
awesome content on solid works so let's
0:51
tutorial here I have created a new file
0:54
and uh I will select this top plane and
1:01
rectangle and I will create a two-point
1:06
rectangle now click on Smart Dimension I
1:09
will give my Dimension let's uh I give
1:14
500 in length and 250 in
1:23
height now I will come out of the
1:27
sketch click on exclude box
1:31
looss and I will give the thickness of
1:38
okay and now we will create the whole
1:42
feature on the surface of our rectangle
1:45
so we will select our face and click on
1:52
results so here on the whole result we
1:56
will click on the position
2:03
will give the position of our hole for
2:06
this we will uh create
2:09
some points let's see I create these
2:16
and right click and come out of the
2:26
now we will select the smart dimension
2:30
and uh constraint our points let's give
2:44
move and move this also towards right
2:49
side again I click on the smart
2:54
Dimension I also give it 150
3:04
150 let's see whether it fit in 150 yes
3:07
it has been fitted now we will give the
3:14
Dimension Let's uh give 30
3:26
now we will add the horizontal relation
3:36
so we have created the points and now we
3:39
will switch to the type of the
3:42
hole now here we have multiple options
3:49
hole either you want to create a simple
3:52
hole or a tapped hole so let's click on
3:57
tole and once you click on the tap hole
4:00
you will uh see the size of your hole
4:09
M16 whether you want it through all or a
4:13
blind if you select blind you can give
4:15
the distance but I will keep the through
4:18
all and from here I will select the tap
4:23
hole and I want to display the thread of
4:26
my hole and I will click okay so you you
4:29
can see that uh m116 tap hole is created
4:35
now we can easily customize our
4:41
hole let's see I want to change the
4:49
position so I can simply change the
4:52
distance or I can add one more points or
4:57
one more holes for example I want one
5:02
position and I want to delete this one
5:06
so I will simply select this point and
5:08
delete it and here I have added
5:11
one and uh I will add the vertical
5:16
relation and I will give the
5:21
dimension let's give it uh 100
5:25
mm click on okay so here we have releted
5:30
one point and added one point and click
5:34
okay so you can see that our hole is
5:37
updated let's try something more with
5:40
our whole feature click on edit
5:44
feature and now instead of uh this uh
5:49
straight tap hole let's try the counter
5:54
holes and now here the type of a hole
5:58
which you want you can select from here
6:03
time and I want it through all and here
6:07
you will get the other sizing options
6:12
okay so you can see that our tap hole
6:16
has been converted to the counter
6:19
board let's try some other holes with
6:23
whole features click on edit
6:26
feature and now let's try the counter
6:35
sunk and here you can select the
6:39
standards for all holes for example if
6:42
you are making the counter board or
6:44
tapped tole you can select the standards
6:47
I will prefer to go with
6:50
ISO and click on okay so you can see
6:54
that counter board changed to the
6:59
if you go to the whole
7:03
feature here you will have the size of a
7:08
custom holes you can create your own
7:10
custom hole or if you selected the
7:13
counter board holes you will have also
7:15
the option of a custom sizing if you
7:18
click on it you can create your own
7:21
custom holes apart from what is
7:26
standards and in position option
7:31
as we have seen that we can add few more
7:39
want so here I have added three more
7:43
holes and as solid works is a parametric
7:46
in nature so it automatically identifies
7:49
the points and update your
7:51
holes so this is all about how to use
7:55
the whole feature in solid works when we
7:58
will do the part model tutorials in
8:00
upcoming lectures then we will actually
8:05
holes whole feature of a solid works in
8:08
a part as per our drawing so this is all
8:11
about this tutorial thank you for
8:12
watching and thank you for your valuable
