0:00
Hey, Chris here. I'm going to go ahead and assemble the pendant light
0:02
And this is what I got so far. This is the whole pole over here
0:07
And all these came de-attached just like this. So right here and right here. And I went out, just had an unscrewed these little things in here with this
0:16
So it would be like this section over here. And then took off these plastic caps
0:23
So it can actually go ahead and be fit into here just like so. And then the cable, I just went ahead and bent it like this
0:30
put it back inside and just pushed it in. And I can just go ahead and orient this correctly and just slide it into place
0:38
Now all that's missing is just to tighten up the bolts, the little screws here. And I can do the same thing for the other side
0:44
And next I can go ahead and actually put on the lampshade. So there are four of these
0:48
And the way to do that is by going ahead and just unscrewing this part
0:53
placing the lampshade right up there. And then just going ahead and screwing that part right in over here
0:58
And this is how the first one will look like. So I went ahead and finished putting the shades on all the other three
1:03
And then this is how it looks like. And I think it ended up looking real nice. So now I'm just going to go ahead and just put the balls on both ends
1:11
So now I can put these balls on each end. And it's screwed in nice and tight. And there, that's nice and tight as well too
1:16
And it definitely gives it nice accents on each end. Now it time to put these right on top of over here And this one can just go ahead and be screwed into place just like so And this just has to be snaked from the bottom right over here
1:30
Just like so. And then it can go ahead and be pulled all the way through
1:34
And finally when the end is reached, this can finally be screwed into place
1:40
The next thing is to go ahead and attach the chain onto the other end. So this can go ahead and just be opened up just like so
1:46
I can go ahead and grab this and just attach it just here
1:50
That should be good. And again, I can go ahead and tighten this
1:54
And then for the other side of the chain, do the same thing
1:58
But this time, I'd go ahead and attach it onto this little ball over here
2:04
And just like before, we can go ahead and snake everything through here. And I already put this wire, but this wire's still missing
2:10
Comes out the other end, and there. Now everything just has to be pulled. just to give you a rough idea of how it would look like and yeah this thing is definitely
2:17
really long but it came out looking nice and of course the only thing left would be actually
2:23
installing it up on the ceiling and also the wires would of course have to be wrapped around
2:27
the chain just so it's a little bit neater than how I did it but yeah let me just hold it by the
2:32
chain so you can see how it looks like that's how it would be but yeah I really like the color
2:39
I like the fact that it has different colored balls, different colored billiards on both sides
2:43
the white and the black right there. And yeah, that's a quick assembly of the lights
