0:00
Hello friends welcome to Solid Works
0:01
tutorial and in this tutorial we will
0:03
model this uh door bearing in solid
0:06
works as you can see that I have already
0:08
modeled it and I will show you from the
0:10
scratch how you can do the same in solid
0:13
works so I will close this file and
0:15
create a new file you can also visit my
0:19
website macn nexus.com and you can visit
0:23
this solid works tutorials tab where I
0:26
have written so many tutorials on solid
0:30
works where you can follow the
0:32
stepbystep guide to model the
0:36
parts if you like my method of teaching
0:39
then you can also support me on kofi.com
0:42
you can buy me a cup of coffee your
0:46
small support will help these channels
0:48
to grow and it will motivate me to
0:51
create more awesome content on solid
0:53
works so let's come back to our
0:58
tutorial so here I have created a new
1:00
file and if you see our drawing this
1:02
Dimension are in inches so we will uh
1:05
switch to our unit to the inch you can
1:08
also change your unit by going to the
1:11
setting and then documents properties
1:13
and go to the units and you can
1:18
now first thing we will create this uh
1:22
base feature so for this we will select
1:26
play and uh we will create a
1:57
this click on extrude
2:17
now we will create this
2:20
uh boss feature so for this we will
2:24
select this back pH and click on the
2:27
sketch and we will uh make this phase
2:31
normal and we will create a rough
2:43
profile now we will constrain with
2:46
Dimension so from this age it is
2:54
A5 and this is uh 2.76
3:13
3.26 and this angle is of
3:34
now our sketch is fully
3:39
now we will come out of the
3:42
sketch select the sketch and uh click on
3:45
extrude extrude to the 1.5
3:49
in click on reverse click on
3:57
now we will select this phase as and
4:00
click on sketch and we will create the
4:03
of12 in we will add the
4:15
edges and click on convert entities
4:22
draw horizontal line and now click on
4:27
the trim and trim the geometry
4:31
and give this dimension of uh
4:38
1.88 and now we will uh come out of the
4:43
sketch select the sketch click on
4:46
extrude and add the material of
5:16
7 now here here is a chamfer which we
5:20
see now we will create the champer
5:34
we will uh make this phase
5:39
trim trim the unnecessary
5:46
now we will uh delete this
5:51
constraint and now from the
5:54
bottom 1.62 in select smart dimension
6:23
sketch select the sketch click on
6:27
Cut and from here say to all say
6:33
okay now we will create this cut so we
6:36
will again select this phase and click
6:44
a rectangle profile and now constrain it
6:53
normal so from this age it is
7:07
3838 and from the top it is
7:22
sketch select sketch click on exude
7:26
cut and say through all say
7:36
7 now select the phase and uh click on
7:39
the sketch select the slot tool and
7:46
slot and select smart Dimension and uh
7:50
from the HED give it 1 in
8:00
Center to Center is of uh
8:27
uh slot width is of 1
8:33
in our sketch is fully constrained we
8:37
it and create the pad of
8:47
okay now we will create this cut select
8:51
the ph and click on the
8:54
sketch and make this phase
8:57
normal select the slot
9:07
slot and Slot width of
9:20
five and come out of the
9:26
sketch select sketch click on extrude
9:32
and say it through all say
9:40
7 select the phase and click on the
9:50
now give the dimension from the AG it is
10:25
sketch select sketch click on exude cut
10:31
and from here say through
10:38
all now here is a common radius of uh1 2
10:46
give to the edges so I will select
10:52
and give the radius1
11:19
now we will also add uh radius to these
11:27
edges so here I will select this
11:39
okay now press contrl
11:41
7 so here you can see that we have
11:45
successfully converted this door bearing
11:48
into the 3D model and I hope you have
11:51
enjoyed this tutorial if you have
11:53
enjoyed the this this tutorial then
11:55
please like subscribe and share my
11:57
channel and also support me on coffee .c
12:00
you can buy me a cup of coffee your
12:02
small support will help these channels
12:04
to grow and it will motivate me to
12:06
create more awesome content on solid
12:08
works you can find Link in a video
12:10
description so this is all about this
12:12
tutorial of a door bearing thank you for
12:15
watching and thank you for your valuable
