Icuero Wallet Stand for iPhone -- First Look!
3K views
Jun 22, 2024
Tired of having to prop up your iPhone or hold it for FaceTime calls? The Icuero Wallet Stand solves the problem, neatly and without adding bulk to your phone. Better yet, it works with both landscape and portrait modes and even has space for a couple of credit cards too! Tech expert Dave Taylor of https://www.AskDaveTaylor.com/ got his hands on an Icuero Wallet Stand to try out before the Kickstarter campaign started and it's pretty cool... Find them on Kickstarter: http://bit.ly/2Z8Quy6
View Video Transcript
0:00
It's a simple wallet stand for your phone, but does it work? Let's have a look
0:12
Dave Taylor here and I'm looking at this. This is the Iquero wallet stand and it's thin. It's a very simple design
0:19
You see it's multiple components. It's pretty rugged and stiff and on the back it has sticky tape, right
0:26
So it's easy enough. I'm going to install this particular one on my iPhone XS and
0:32
that's a nice easy process. All you have to do is make sure you don't get in the way of your camera and
0:38
I put it on and there we go. Ready to roll. Now, what does this give me
0:44
Well, the first thing it gives me it gives me a little stand, right
0:48
So I can do the stand this way, but here's what also is neat
0:52
is that because of the way they designed it, I can also do the stand this way and it's a little tight right now
0:58
It's going to loosen up a little bit, but check that out, right? There's a little side view for you
1:03
So I can do it in either orientation. Nice and easy and there's that side view for that one and
1:10
not only that, but it also has space for a couple of credit cards
1:14
So I can slide one in either the lower slot or in the upper slot or obviously I can put it in both
1:21
Well, I can't put the same card in both, but I think you know what I mean
1:25
Anyway, that's it. Nice and simple and with the cards in again
1:30
certainly easy enough to use and the most important thing is it's very slim and
1:34
because of the 3M adhesive that they use, it also means that if you don't want to use it or you change your mind
1:40
you can take it off and there's no residue. Nice and easy. Now, comes with one additional thing
1:46
There's also a couple of little dots here that you can use
1:50
I believe the intent is to put them on the edges so that you then have a little bit more of
1:55
padding so you can do that if you want and they come in different sizes and shapes. So here's a different one
2:01
This is for a different design phone. Obviously, it's not only too wide for my iPhone, but it would cover up the camera, which would not work very well
2:11
This is for one of the larger units. So let's put this aside
2:15
And so let me tell you that the iQuero comes for the iPhone 6, 7, 8 or the XR or X Max
2:23
I think that's what this one is. And then there's another unit, which is what I have on my phone
2:28
which is for the X or the XS and here's the thing. They're on Kickstarter right now or they will be very soon and it's crazy
2:36
inexpensive to get it while it's a Kickstarter campaign. You will pick these up for somewhere between 14 and 19 bucks
2:43
Eventually when they are in the retail channels, they're going to run $25 each
2:47
So if you wait until it shows up on Amazon, for example, it'll be 25 bucks and
2:53
it's a pretty slick little idea. You know, I think as it gets a little more flexible
2:57
it'll be even nicer in terms of it being a stand and such so you get all the different angles and you can adjust it
3:03
to the angle you like and I really like that they've designed it so that it works either way because I often have my phone in this
3:11
orientation and to be able to do that like right next to my computer or something or put this on my side table
3:16
really good. Now one more thing is and I've tested this but I don't have right here something to show you
3:22
but this doesn't get in the way of using a wireless Qi charger
3:26
The only thing I would say is I would probably pull my cards before I put it on a wireless charger
3:32
A, because it just adds more thickness, but B, just as important is you don't want to have anything happen to maybe
3:39
demagnetize your card, especially if it's like a credit card or something. So like this it will still work with a wireless charger. Since you can put this on a case
3:48
however, if I have my phone in its case, let me hold to show it this way, if I have my phone in its case
3:54
and then I have this on top of the case, that might be a bit too much for the wireless charger depending on what design
4:01
you have. So that might be something you want to test out. But generally, you know, why would you have multiple levels of case
4:07
This is just a nice simple solution. It doesn't protect your phone. Obviously, there's nothing on the edges, but in terms of making your phone much more functional, it's pretty simple
4:17
I like it. Pretty cool stuff. Now, before I actually wrap this up
4:21
let me ask if you can subscribe to my channel. Really appreciate when you do that. Cool
4:27
Now, finally, this is the iQuery wallet stand in a variety of different shapes and sizes for various iPhones
4:34
Check it out on Kickstarter. And with that, this is Dave Taylor. And who knows, maybe I'll watch some Netflix on here
4:41
Which means I'll catch you in my next video. Transcribed by https://otter.ai
#Arts & Entertainment
#Computers & Electronics
#Shopping