0:00
So Rainmussen sent me this T-Infuser, so I just want to do a quick comparison between another one over here
0:05
Now, both of these are going to be, of course, T-Infusers. There's going to be similar in size, similar in height, but where things differ is basically the construction of it
0:14
So here, let me take off both of the lids. Up top is going to be the fact that the Rainmussen is going to have a wider length
0:21
So in this case, it's going to be able to be put in wider pitchers or wider mugs
0:26
And another thing too is it is gonna have these rubber bits on the side which is basically gonna help
0:30
When you go ahead and pull it out that you don't burn yourself versus over here. There's nothing
0:35
So if it gets too hot, you know, you can kind of burn yourself over here Now both the lids are gonna go ahead and look pretty similar. This one's gonna have like kind of like a mirror finish
0:43
Here's what the backside looks like. They're both gonna have a rubberized base. So when you go ahead and set it down
0:49
And you put it down they'll both go ahead and fit here, you know, nice and stable for both of them
0:55
but the most important part is let's see how these compare with different sizes of mugs and pitchers
1:01
So starting off I just have a cup over here and of course both them should fit nice and comfortably
1:07
just like so and then we'll move up to a mug and once again both them do fit
1:17
and now let's get into something a little bit bigger now this isn't really a pitcher it's more
1:26
of a wider nutri bullet cup but this is where things start to get a little bit different just
1:32
because this one will kind of lean off to the side and if this was any wider this would fall inside
1:36
and this is where both the handles come in handy just because it go ahead and hold it on both sides It can be easily removed And now finally time for the pitcher Now this isn a tea pitcher this is more of a water pitcher
1:50
But same thing happens whenever I go ahead and put the other one in. It's not going to be able to be held no matter how much I try
1:56
And it'll just go ahead and fall inside. But when I use this one, I can just put it on the side just like so
2:04
And it'll go ahead and fit. It does teeter because this is a pretty wide pitcher. But nonetheless, it still does go ahead and fit on nearly every single angle
2:12
Yeah, even over here. And here's what a top view of it would look like. So as you can see, I can just kind of spin it around in different places and it'll still go ahead and hold
2:20
Now let's take a closer look at the construction of both these. And now finally, time for some tea
2:26
So I'm going to end up using this cup just so you can go ahead and get a clear view of what's going on
2:31
And I don't have loose tea currently, so I'm just going to be using this teabag
2:36
And then I can pour some water. and I'll just wait a few minutes until it gets fully infused. This sink also go right on top
3:08
And when done this can easily be cleaned up as well too