0:00
I just got the Camello mobile whiteboard so let's check it out
0:02
So here's all the pieces it comes with. Alright so the first thing I do is to grab this vertical bar and then screw in the castor
0:08
wheels right over here. Just like that and then do that for the second bar
0:15
Alright now it's time to grab the vertical bar and this is going to be the one with no
0:20
holes on it whatsoever and this crossbar and then make sure these holes are facing inwards
0:26
and we're gonna screw both of these in together with these B screws
0:32
And the same thing on the other side. Alright, so now it's time to install this second crossbar
0:38
with these two screw holes facing upwards. And there's gonna be three different options
0:42
to install it at, either all the way down here, here or here, and since I want the highest setting
0:47
for the board, I'm gonna install them right here. Alright, now it's time to install this bar
0:55
right under here and we're going to be using these E screws. And now in the top part of the bar, we can install this flipper right here
1:04
And now it time to grab this round metal piece and attach it to the whiteboard itself right here and we going to screw it in with these small e screws and then same thing on the other side all right so now it
1:17
time to put the whiteboard right on top of here and this will lock into the grooves and now we can
1:24
put the cap right on top followed by this pin right here and the same thing on the other side
1:33
What you're going to do is to insert these rubber caps in the holes just like this
1:37
And then also this flip book cover right on top. And then finally this marker holder which also serves as an eraser from the back
1:47
And it just attaches magnetically. Alright it also does come with a timer so I got the back door open and then I could just insert one of my batteries I have
1:56
And the cap goes right back inside. and here it is and this can stick on to the board just like that since it's magnetic on the back
2:05
or I can place it right inside here and this grips it really nicely just because all around
2:11
is going to be rubber and another cool thing about this too is it does have
2:15
this stand so I can open it up just like this and then prop it on a table
