Up next in 10
FreeCAD Part Modeling Tutorial 37 | FreeCAD Tutorial | FreeCAD Part Design | Mechnexus |
0 views
May 19, 2025
#freecadtutorial #freecad #freecadpartdesign In this video I have explained How to Model Part in FreeCAD with the help of part design Workbench. ▶️ Get my Complete FreeCAD Course : From Zero to Expert ! on Ko-fi https://ko-fi.com/s/1ab4385434 ▶️ Get my Complete FreeCAD Course : From Zero to Expert ! on Udemy https://www.udemy.com/course/freecad-course-for-beginner/?referralCode=3BA9B526A12F96295D44 ▶️ Join my channel membership and keep supporting my work: https://www.youtube.com/channel/UCcn6z2whMaFu-_LDsEXCfVA/join ▶️ Visit my website for more info on FreeCAD-: https://mechnexus.com/ ▶️ Download Source File of Tutorial-: https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ ▶️ Buy Me a Coffee I am very grateful that you watch my videos and I am constantly trying to improve the quality of the videos on this channel. If you'd like to help me do this, please consider supporting me so that I can to continue to produce content for your enjoyment.
View Video Transcript
0:00
hello friends welcome to free cat tutorial and in this tutorial we will
0:04
convert this orthographic drawing into the 3d model and we will make the SATs
0:11
model like this isometric view so before starting this tutorial if you like my
0:20
method of teaching then you can support me on coffee.com you can buy a cup of
0:26
coffee for me your small support will help this channels to grow you can also
0:31
support me by buying this free cat crash course for beginner I have designed this
0:37
course for the beginner users who has just started learning the free cat at
0:44
very affordable price so by buying this course you can support me to help these
0:52
channels to grow and also apart from making the free CAD tutorial please
0:58
visit the macnexus.com where I write the article on free CAD and open source
1:05
software here you will get more information about the free CAD apart
1:10
from the tutorials on my youtube channel so coffee.com and my website
1:17
macnexus.com link is given in a video descriptions please visit and and keep supporting so now come back to our tutorial
1:30
so for this we will create a body and we will on our plane and here i will switch to the orthographic view
1:40
so before starting the model we will study this model and how we are going to start this model so for this
1:48
we will make this extrusion to mid plane and then we will make this plate and this plate
2:03
and after that we will make a hole and make this extrusion so this is the very simple
2:11
tutorial and this tutorial is designed for the beginner user of a free card and i will
2:17
also provide the source file and this 2d drawing in the video description so any
2:23
beginner user can refer my model and practice and master the free cap so now
2:29
I will select this exit plane and I will create a sketch and I will off my
2:36
origin plane now I will draw a circle on my origin and its diameter is 40 here
2:51
given so I will select on diameter and I will give here 40 and inside one is a 35
3:01
so I will click on the circle and view diameter 35
3:17
sorry outer diameter is a 60 Now I will close my sketch and now I will switch to the isometric and I will click on
3:39
the pad and length is a 96 so I will give here 96 and I will click on submit to the
3:48
plane and I will say ok we have made the base feature of our part now from our mid plane we will create a
4:07
plane and on this plane we will draw this profile and then from this mid
4:16
plane we will use a mirror tool and we will mirror it on the other side so for
4:25
this I would on my plane and I will select this plane and I will create a datum plane
4:32
so I will move my toolbar here and I will click on here datum plane and in a Z direction
4:45
I will give the position of my datum plane so if we see the top view if I zoom down here
4:55
the model so it is a 50 plus 15 mm so 50 divided by 2 is 25 plus 15 so it is 40
5:15
so here in the z direction I will give my dimension 40 and we are considering
5:24
the material thickness so in this case I will make my extrusion direction in this
5:35
side if you wanted to make extrusion outside then you should not consider
5:43
this 15 mm material thickness just offset it by 25 mm so I am considering
5:52
the material so I will click on OK and now I will off my origin plane and here
6:01
I am seeing the blue tick symbol so this means it's required update so I will
6:07
click on here refresh or you can press the F5 so you can see that blue tick has
6:13
been gone and now I will select this datum plane and I will create a sketch
6:19
on this plane now I will fit my model now I will project the outer edge and I can also off my datum plane now click on
6:47
project geometry and then the outer outer diameter is given R40 here if I zoom it
7:03
so it is R40 so I will create a diameter of circle 80 so I will select a circle
7:13
and I will draw a circle and then I will give the diameter 80 and then I will
7:26
draw the two lines like this and I will make it tangent same here I will make it
7:38
tangent and now I will move it to the approximate position and now I will
7:46
create a three-point arc and I will create an arc and I will make it tangent
7:56
and I will make it tangent and now I will trim the line click on the trim tool
8:10
and inside also a trim now I can see here this is not a horizontal so I will
8:22
select this point and this point and I will give the horizontal constraint now
8:27
the center to center distance is a 130 so I will give my dimension 130 and the
9:00
Ok, now we have made our plate and now I will come out of the sketch because my sketch is
9:15
fully constrained so I will click on close and as I have included the material thickness
9:23
so I will click on the pad so in this case I will reverse my directions to the inside
9:31
one and I will say okay so here I can see that material has been added here to avoid this
9:43
we will again go to our sketch and project the inner one
9:48
and switch to the wireframe and I will draw a circle and I will make it equal
10:02
and then I will close my sketch and I will switch to the flat lines and then I will
10:12
create a pad and here I will reverse my directions now I will say ok now I will
10:21
press 0 now I will mirror it to the other side to mirror it select the
10:30
feature you want to mirror and click on here mirror tool and the selected feature
10:37
will be added here so here free guide automatically took the reference but I
10:44
want to define my reference so I will click on the reference and here I will
10:51
select this mid plane and it has been mirror on the other side I will say ok
11:01
and now I will create this pipe to create this pipe I will select my mid
11:18
plane and I will create the sketch on this plane and I will project my arc on
11:31
that plane so if I switch to the isometric view so you can see that has
11:36
been projected and now I will click on the circle I will draw a circle and make
11:47
sure it is a coincidence yes it is a coincidence and now the pipe diameter here given is a 25 so I will select it and I will give my diameter 25
12:10
now I will switch to the so it is a radius it has been tooked so I will give it a 12.5
12:17
because it is a diameter or I will delete it and simply give the diameter to avoid the
12:26
confusion so I will select here and select diameter and diameter is a 25 now
12:33
I will close it and total length of this pipe is a same with our boss base
12:42
feature so it is a 96 so I will select on this cage and I will create on the pad
12:49
and I will give here 96 so it has been on one direction so I will select on
13:02
symmetric to the plane I will say ok now I will off my origin plane now I can see
13:14
here one small hole of diameter 10 to through this pipe so I will select the
13:21
face and I will create a sketch and I will project the diameter and I will
13:29
select the circle and I will give the diameter 10 so I will select it and give
13:39
diameter 10 and I will close it and I will go with extrude cut and I will say
13:46
simply true all and we'll say ok so now if I place my model to diso matrix so we
13:59
can see that we have a successfully converted this orthographic drawing into
14:05
the 3d model and if we look for the orientation so front view is matching
14:11
perfectly and if I go with the side view it is also matching perfectly left and
14:23
right view both side so now we will give the color as per our part so it is the same color so this is
14:41
how we have completed our model I hope you have liked this tutorial and if you
14:45
like this tutorial and my method of teaching then please like subscribe and
14:50
share my video and also support me on coffee.com either buying a cup of coffee for me or purchasing
15:00
my course free cat cash flows for beginner at very affordable price this is a very
15:06
minimal price which i have a set so that anybody can master the free cat and enhance their design
15:14
skill because free CAD having the lots of potentials it has a lots of work
15:21
benches you can do anything in a free CAD part modeling 3d printing FEM and
15:27
lots more and at same time also check my website macnexus.com where I post very
15:36
useful videos on free CAD you can also find the video tutorials here and also
15:44
text tutorials and other information related to the free cat which will enhance your knowledge
15:51
on free cat so this is all about these sessions i will come with a more useful tutorial like this
15:59
thank you for watching and thank you for your valuable time
#CAD & CAM
#Computer Education
#Sculpture
#Training & Certification
#Visual Art & Design