0:03
Matt here again and today we're gonna be
0:05
doing a quick rundown on how to load 120
0:07
millimeter film into the my I'm 645
0:10
let's get started go ahead and take a
0:18
look around the camera just so you
0:19
become more familiar with it before you
0:21
go out and shoot begin by pressing down
0:38
on the memo clip and push the back cover
0:41
latch in the direction of the arrow so
0:43
that the back cover releases after
0:46
everything is opened up press the clips
0:48
on the sides of the 120 on the release
0:51
latch and pull the cartridge out of your
0:53
camera after you open it up make sure to
0:56
look around the film cartridge and
0:58
spools and also get to know the inside
1:00
of your camera just to learn everything
1:02
and become more familiar with it here
1:10
you can see what the film cartridge
1:11
actually looks like and you can also see
1:13
the spools and all the clips and parts
1:38
after you've gotten to know your film
1:40
cartridge go ahead and grab a roll of
1:41
film and get ready to load the camera
2:10
okay so you're gonna need to start by
2:12
placing the roll of the film into the
2:14
top of the cartridge and make sure that
2:16
the film is coming from underneath the
2:18
roll and not the top and then it
2:21
releases out at the bottom so it will go
2:25
once that's secured into the film spool
2:28
stud then you're gonna need to make sure
2:30
the clip is in tight so that the whole
2:32
roll is secure and then after that begin
2:34
feeding the film behind the cartridge
2:43
after you've fed enough film through go
2:46
ahead and push the film leader through
2:50
the film take-up spool where there's a
2:53
little slot and from there you're going
2:55
to need to spin the wheel on the outside
2:57
of the cartridge so that the film
2:59
actually gets caught by the film take-up
3:01
spool go ahead and keep spinning the
3:18
wheel until the film cartridge shows the
3:21
start line once you see the start line
3:37
align it with the start indicator on the
3:40
outside of the film take-up spool clip
3:47
after the film line is aligned with the
3:50
start indicator go ahead and place the
3:52
film cartridge back into the camera by
3:54
holding on the clips on the sides of the
3:56
120 and then place it into the back of
3:59
your camera until you hear an abrupt
4:02
click and then go ahead and close the
4:04
back of the camera by pushing the back
4:06
cover latch in the direction of the
4:07
arrow and press down on the memo clip
4:09
until the back door clicks in shut hope
4:14
you guys enjoyed this tutorial if
4:15
there's anything I can elaborate on or
4:17
if you have any specific questions feel
4:20
free to leave me a comment and I'll get
4:22
back to you as fast as I can
