0:00
What if your return, instead of being on the right side of the humidifier, was on the left
0:17
Then everything would seem to be upside down. We've made it super easy for you to be able to
0:22
change the humidifier around and make sure everything is going the right way and in the
0:26
right direction. It starts with this cover. I'm going to take this back off. You'll notice
0:31
our batch here is facing the direction that the humidifier was installed. If I had to
0:35
change the direction that the humidifier was facing, we just grab this pin, push it, and
0:42
our plate pops out. Now, we can reinstall our name plate like such, so that when we
0:51
turn the humidifier, we're pointing it in the right direction. Now if you put the humidifier
0:56
in, it's going to look like everything's upside down. Okay? Everything on the humidifier can
1:02
be changed around so that you can make sure that you're draining out of the bottom because
1:06
draining out of the top isn't going to work. Let's show you how. So first thing we do is
1:10
we got to remove the drain spud To remove the drain spud just rotate it If you rotate it it will pop right out of the top Next we have a blanking cap inside the humidifier
1:23
Simply rotate that, and it will pull out of the bottom. Now, we flip
1:30
So, as we look at our drain spud, there are little notches that line up with the drain opening at the bottom of the humidifier
1:39
simply take your drain spud line up those notches and it will sit through the bottom of the housing
1:47
now we can rotate it counterclockwise and it locks into place now if we look at our blanking cap
1:55
you're going to notice that we've got the same notches on this blanking cap the difference here
1:59
is instead of installing this from the inside of the housing this one comes from the top so we line
2:05
Line up our notches with the opening. It'll pop right in, sit flush, rotate this one clockwise
2:13
There's a little pin underneath that can help you turn it. And now you've changed the drain
