Up next in 10
In this video, I go over the Neakasa Magic 1 Vacuum Steamer
Check it out here https://geni.us/FPsjP
Want FREE Shipping With Amazon Prime? Get a 30-DAY FREE TRIAL by signing up here http://www.amazon.com/tryprimefree?tag=thechrisreview-20
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Show More Show Less View Video Transcript
0:00
So my shirts can get pretty wrinkly and I don't like ironing so let's see how well this steamer
0:04
works. And this steamer is going to be by Nia Casa and it's the Nia Casa Magic One Vacuum
0:09
Steamer. And it basically just comes with the steamer and then some instructions. And the first
0:13
thing to do is to fill this up with water and it comes with this reservoir pack and I can just put
0:18
my finger here and pull it right out and here's what it looks like. And I still have a little bit
0:24
of water for when I used it last time. And to fill this up this rubber piece has to be removed so
0:28
this can be pulled right out and the water fills right there so I'll be right back and there I filled
0:34
the water right up and now I can just push this back inside and this will fit right inside just
0:39
by pressing it like this and then giving it a good push and there now time to connect it and start
0:45
this up all right so I have the outlet right behind here and I can just plug this in and there
0:51
now to actually start this up just got to press this button right here
0:58
and hold it and there now it's currently green but it's blinking red
1:05
so i'll just step back a little bit and i'm going to give it a few seconds to actually charge up
1:10
all right there now it's a steady red light and that means it's steam mode and i know that because
1:19
it literally tells me on the back of the card right over here so when it was blinking it was We just preheating and now steam is actually coming off as you see right here And let see what happens if I press it again
1:34
Yep, it just turns right off and now it's blinking on and off green
1:38
And we also have this other button and that's going to be for the suction. So if I want to suction it, I guess I hold it
1:47
All right, so I guess the suction doesn't work unless this is on. Yep
1:53
And if I turn it off, everything turns off. So the only way to use the suction is if I have the steam
1:58
currently coming off. So now let's move the location to over here so I can actually steam
2:02
my shirt. All right, and just so you can get a better look of what this shirt looks like
2:06
here it is. We got some wrinkles on the side, on the sleeve, basically everywhere, but it kind of
2:12
looks a little more aggressive on the right side. So let me just set the camera up over here
2:16
and then I can actually start the steamer itself. Yeah, it only goes up to here
2:20
suddenly reposition this a little bit more on this side and there that should be a little bit
2:25
better and there now you can get a better idea of what this looks like once again i'll press it
2:31
and the seam comes right off all right so i don't want to use the vacuum right now i'll just do it like this
2:40
when i can already see this making a difference and this is without the suction
2:44
and over here in the ear the chest area and just the torso overall this is where
2:50
it looks to be the most aggressive with the wrinkles Yeah this bottom part is where it has a lot but I think yeah for this quick demonstration on the left side it did a very good job like check it out
3:07
So here's that first half and you can see it was a lot tougher to get the wrinkles out at the bottom
3:13
but it still did pretty well and when you compare it to the other side you could see
3:19
it's a big difference. And now what I want to do is actually try that suction out. And my
3:25
guess is that it might be a little bit difficult, especially because this is just kind of loose
3:30
hanging over here. So, but either way, I'll still try it with the suction and see how that works
3:34
And I'll start with the sleeve. So remember, turn it on and then press the vacuum
3:42
Actually, so far, this is pretty surprisingly easy to use with a vacuum. It's not like a powerful
3:46
powerful suction where it's going to literally take this off the hanger, but it's a good amount
3:50
that I could kind of control where I'm going. So now let's try for this area over here
3:57
All right, so that's it. It's literally done with the steaming. This vacuum made a huge difference
4:04
like literally, look at it. Check it out. This looks a lot neater, a lot more wrinkle-free
4:12
compared to when I didn't use the vacuum, because if you check down here, you could still see some wrinkles
4:16
where I was having some trouble going here, but on this side it looks a lot better Now it not perfect I did this pretty quickly I could still do a little bit more on this side but I think this took like what 30 seconds I probably took like a minute on this side Literally in half time and it came out looking basically twice as much better So
4:35
definitely use that vacuum feature. And by the way here's how much water is left. So we started like
4:41
nearly to the top. I think I was like right around over here and I used a little bit just about
4:47
over half. So I guess if I want to get this complete shirt done, I would need to refill
4:53
this one more time because of course, you know, I still have the backside. But because of the speed
5:00
with that vacuum, I think I could probably just use what I have now. So now let me get the back
5:05
and show you what I'm talking about. All right there, now it's positioned well and ready, set
5:11
and start. All right there, did a pretty good job and actually I still have a bit more water left
5:20
here so I can still keep steaming but I think that's good for now and here's what the backside
5:25
looks like. So the easiest part was to actually get this whole part. The sleeves were a bit trickier
5:30
so I didn't do the best of job but overall I think it came out looking really well. This didn't take
5:36
too long and of course if I wasn't filming I'd be able to do this a lot easier but yeah overall
5:42
I'm pretty happy with this steamer and if you're looking for a vacuum steamer handheld one where
5:47
you can actually take a round with you definitely check this Nia Kasa Magic 1 out
#Computers & Electronics