0:00
I just got this artificial 7 foot Christmas tree by the national company so I just want to do a quick assembly of it
0:05
Now it came with a bunch of different sizes but I figured 7 foot was good and it's going to fit nicely over here in the corner
0:14
So here's going to be some of the paperwork. Here's one of the branches and this thing is really long and really heavy
0:20
The whole box is going to be actually over 30 pounds itself so this is definitely really big
0:26
Here's going to be the second section and the third section. And we're also going to have this base, which just easily goes ahead and opens up
0:33
And then I can just go ahead and tighten it like that. So this thing can go right over here
0:38
And so here's a closer look at the three branches. And they're actually going to have a paper attached
0:42
This is going to be the tag letting you know which is which section. So this is section one. This is section two
0:47
And this is section three. So I can just go ahead and take off all these red caps
0:52
Just like so. They come off really easily. And I can go ahead and attach the first one to the base over here
1:00
Just like so and then this can go ahead and be tightened like this and so looking down here
1:04
This is where all the branches are going to be individually attached. So as I go ahead and let go of one
1:09
There's a swing down over here and they'll just hang from here And so here's a quick look at the first section and it definitely needs a lot of work
1:15
I have to go ahead and individually just loosen up these branches and just go ahead and spread them out
1:20
Just so it looks and feels fuller Starting from over here I just go ahead and pull apart each one of these there that one section down now 13 more to go so here the first part of the base layer and now i do have the second
1:33
layer to go ahead and start working on now as well too but yeah i definitely need to go ahead
1:37
and spread these out a lot more so it looks a lot more fuller all right so here's what i ended up
1:41
doing and i think it ended up looking pretty good now it's time for the second part the second
1:47
section which is going to be this big one over here and i can just place that right here
1:52
this is where there's going to be a lot more sections to do wow this is a lot so here's the
2:00
second section finished and now yeah this thing's pretty small but this is what makes it seven and
2:07
a half feet over here now this one's a little bit different just because it's fully made out of the wire it doesn't have like those hooks that go back and forth so i could just start by unfolding
2:16
all this over here and then opening it all these back up all right so here's the finished tree it
2:23
ended up taking a lot longer than i thought but that was mainly because i had to go ahead and
2:26
redo the bottom and spread it out a lot more just so the tree looks a lot more fuller i definitely
2:31
think i did a good job i still can see a little bit of gap so i have to go ahead and go inside
2:36
and like spread them out a little bit more but once decorations are put on here when some lights
2:41
are put, it's going to look a lot nicer and even more fuller
2:46
So the only issue that came up when I was assembling the tree and spreading out all the branches was the broken branch, but that's fine
2:53
You can't tell it's missing
