Up next in 10
FreeCAD Technical Drawing Tutorial | FreeCAD Tutorial | FreeCAD Drawing | Mechnexus |
Sep 22, 2025
#freecad #freecadtutorial #freecaddrawing In this video I have explained How to Create Technical Drawing in FreeCAD with Techdraw Workbench. ▶️ Get my Complete FreeCAD Course : From Zero to Expert ! https://ko-fi.com/s/1ab4385434 ▶️ Join my channel membership and keep supporting my work: https://www.youtube.com/channel/UCcn6z2whMaFu-_LDsEXCfVA/join ▶️ Visit my website for more info on FreeCAD-: https://mechnexus.com/ ▶️ Download Source File of Tutorial-: https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ ▶️ Buy Me a Coffee I am very grateful that you watch my videos and I am constantly trying to improve the quality of the videos on this channel. If you'd like to help me do this, please consider supporting me so that I can to continue to produce content for your enjoyment. 👉 Help support this channel by buying me a coffee: https://ko-fi.com/mechnexus
View Video Transcript
0:01
Hello friends, welcome to fre tutorial
0:03
Hello friends, welcome to fre tutorial
0:03
Hello friends, welcome to fre tutorial and in this tutorial we will create a
0:06
and in this tutorial we will create a
0:06
and in this tutorial we will create a technical drawing with respect to the
0:09
technical drawing with respect to the
0:09
technical drawing with respect to the orthographic view of this model and uh
0:13
orthographic view of this model and uh
0:13
orthographic view of this model and uh you can see that uh I have already
0:15
you can see that uh I have already
0:15
you can see that uh I have already modeled it and I will show you from the
0:18
modeled it and I will show you from the
0:18
modeled it and I will show you from the scratch how you can create
0:21
scratch how you can create
0:21
scratch how you can create drawing in free.
0:23
drawing in free.
0:23
drawing in free. So for this tutorial I am using the
0:26
So for this tutorial I am using the
0:26
So for this tutorial I am using the fread version 1.0. So you must have at
0:29
fread version 1.0. So you must have at
0:29
fread version 1.0. So you must have at least 1.0 or a higher version than this.
0:32
least 1.0 or a higher version than this.
0:32
least 1.0 or a higher version than this. You can visit my website mcnexus.com
0:35
You can visit my website mcnexus.com
0:35
You can visit my website mcnexus.com where I write articles and uh tutorials
0:39
where I write articles and uh tutorials
0:39
where I write articles and uh tutorials on free cat. And here you can see that I
0:43
on free cat. And here you can see that I
0:43
on free cat. And here you can see that I have written so many articles on uh
0:46
have written so many articles on uh
0:46
have written so many articles on uh free.
0:48
free.
0:48
free. You can visit the free cat tutorials tab
0:52
You can visit the free cat tutorials tab
0:52
You can visit the free cat tutorials tab where you will find the stepbystep guide
0:55
where you will find the stepbystep guide
0:55
where you will find the stepbystep guide to model a part. Here I have also
0:59
to model a part. Here I have also
0:59
to model a part. Here I have also written so many free tutorials of a
1:02
written so many free tutorials of a
1:02
written so many free tutorials of a part.
1:04
part.
1:04
part. You can also visit my free 3D models by
1:07
You can also visit my free 3D models by
1:07
You can also visit my free 3D models by clicking on the free cat 3D models tab.
1:10
clicking on the free cat 3D models tab.
1:10
clicking on the free cat 3D models tab. And here I have uploaded the so many
1:13
And here I have uploaded the so many
1:13
And here I have uploaded the so many mechanical parts which you can uh
1:16
mechanical parts which you can uh
1:16
mechanical parts which you can uh download, modify and uh use in your
1:21
download, modify and uh use in your
1:21
download, modify and uh use in your projects.
1:23
projects.
1:23
projects. You can also visit my 2D drawing library
1:26
You can also visit my 2D drawing library
1:26
You can also visit my 2D drawing library by clicking on the 2D drawing. Here I
1:29
by clicking on the 2D drawing. Here I
1:29
by clicking on the 2D drawing. Here I have uploaded so many 2D drawings of
1:32
have uploaded so many 2D drawings of
1:32
have uploaded so many 2D drawings of mechanical parts. If you like my method
1:35
mechanical parts. If you like my method
1:35
mechanical parts. If you like my method of teaching then you can support me on
1:38
of teaching then you can support me on
1:38
of teaching then you can support me on coffee.com/macknexus.
1:42
You can buy me a cup of coffee. Your
1:45
You can buy me a cup of coffee. Your
1:45
You can buy me a cup of coffee. Your small support will help these channels
1:47
small support will help these channels
1:47
small support will help these channels to grow and uh it will motivate me to
1:51
to grow and uh it will motivate me to
1:51
to grow and uh it will motivate me to create more awesome content on free CAD.
1:56
create more awesome content on free CAD.
1:56
create more awesome content on free CAD. So let's come back to our tutorial.
2:00
So let's come back to our tutorial.
2:00
So let's come back to our tutorial. Now
2:01
Now
2:01
Now I will uh
2:04
I will uh
2:04
I will uh switch to the techra workbench and in a
2:07
switch to the techra workbench and in a
2:07
switch to the techra workbench and in a tectra workbench here is a default page
2:11
tectra workbench here is a default page
2:11
tectra workbench here is a default page and here is my template library. So
2:14
and here is my template library. So
2:14
and here is my template library. So always go with the template library.
2:16
always go with the template library.
2:16
always go with the template library. Click on it and here you will see the
2:19
Click on it and here you will see the
2:19
Click on it and here you will see the wash template library. So here I will
2:22
wash template library. So here I will
2:22
wash template library. So here I will select the A3
2:25
select the A3
2:25
select the A3 landscape ISO 5457.
2:30
So you can see that template is
2:32
So you can see that template is
2:32
So you can see that template is inserted. Now I will select my body and
2:36
inserted. Now I will select my body and
2:36
inserted. Now I will select my body and uh click on the projection group
2:40
uh click on the projection group
2:40
uh click on the projection group and here I will uh rotate my model.
2:46
and here I will uh rotate my model.
2:46
and here I will uh rotate my model. So this is the top view which I want as
2:49
So this is the top view which I want as
2:49
So this is the top view which I want as a base view. And here I will set my
2:52
a base view. And here I will set my
2:52
a base view. And here I will set my scale type page and say okay.
2:56
scale type page and say okay.
2:56
scale type page and say okay. And now I have a set my scale of a page
3:00
And now I have a set my scale of a page
3:00
And now I have a set my scale of a page type. So I will click on the page and
3:02
type. So I will click on the page and
3:02
type. So I will click on the page and expand it. And here our view is a very
3:06
expand it. And here our view is a very
3:06
expand it. And here our view is a very small. So we will make it larger. We
3:10
small. So we will make it larger. We
3:10
small. So we will make it larger. We will make it two times and press enter.
3:15
will make it two times and press enter.
3:15
will make it two times and press enter. But here you can see that uh view is not
3:18
But here you can see that uh view is not
3:18
But here you can see that uh view is not updating.
3:20
updating.
3:20
updating. So we have to force recomp compute
3:23
So we have to force recomp compute
3:23
So we have to force recomp compute object.
3:25
object.
3:25
object. And now here I will select my top view
3:29
And now here I will select my top view
3:29
And now here I will select my top view and go here and set the sections and
3:32
and go here and set the sections and
3:32
and go here and set the sections and click on the section options and I will
3:35
click on the section options and I will
3:36
click on the section options and I will give the label a
3:38
give the label a
3:38
give the label a and here I'm not seeing my sections
3:41
and here I'm not seeing my sections
3:41
and here I'm not seeing my sections because I have not checked the live
3:44
because I have not checked the live
3:44
because I have not checked the live update. Click on it. So you can see that
3:48
update. Click on it. So you can see that
3:48
update. Click on it. So you can see that a section is created.
3:51
Now I will move my base view
3:55
Now I will move my base view
3:55
Now I will move my base view and move my section
4:00
and uh I will set it. Okay. Now I will
4:05
and uh I will set it. Okay. Now I will
4:05
and uh I will set it. Okay. Now I will lock my section view and let's give the
4:08
lock my section view and let's give the
4:08
lock my section view and let's give the dimension.
4:09
dimension.
4:10
dimension. So before giving the dimensions let's
4:12
So before giving the dimensions let's
4:12
So before giving the dimensions let's understand the frame. So here when you
4:16
understand the frame. So here when you
4:16
understand the frame. So here when you on the frame you will see the cut point.
4:19
on the frame you will see the cut point.
4:19
on the frame you will see the cut point. If you zoom it so these are the C points
4:21
If you zoom it so these are the C points
4:21
If you zoom it so these are the C points which are very helpful to give the
4:23
which are very helpful to give the
4:23
which are very helpful to give the dimensions but when you off the frame
4:26
dimensions but when you off the frame
4:26
dimensions but when you off the frame this point will be get hidden. So here
4:30
this point will be get hidden. So here
4:30
this point will be get hidden. So here let's give the dimensions. So first
4:32
let's give the dimensions. So first
4:32
let's give the dimensions. So first dimension I will give I will press
4:34
dimension I will give I will press
4:34
dimension I will give I will press control key and select these two points
4:38
control key and select these two points
4:38
control key and select these two points and here I will go with the horizontal
4:41
and here I will go with the horizontal
4:41
and here I will go with the horizontal dimension of 48. Let's define the width.
4:45
dimension of 48. Let's define the width.
4:45
dimension of 48. Let's define the width. Select these two points. go here and set
4:48
Select these two points. go here and set
4:48
Select these two points. go here and set a vertical dimension
4:50
a vertical dimension
4:50
a vertical dimension of a 36.
4:53
of a 36.
4:53
of a 36. And
4:55
And
4:55
And now I will define
4:59
now I will define
4:59
now I will define this length
5:02
this length
5:02
this length which is of 18.
5:06
Select this and this 58
5:11
Select this and this 58
5:11
Select this and this 58 and then move it. Now I will press
5:15
and then move it. Now I will press
5:15
and then move it. Now I will press control key. Select these two points
5:18
control key. Select these two points
5:18
control key. Select these two points and uh find the horizontal dimension of
5:23
and uh find the horizontal dimension of
5:23
and uh find the horizontal dimension of 90 mm.
5:26
90 mm.
5:26
90 mm. Now here I will uh select this radius go
5:30
Now here I will uh select this radius go
5:30
Now here I will uh select this radius go to the smart dimension and define this
5:33
to the smart dimension and define this
5:33
to the smart dimension and define this radius then this diameter 54 and this
5:39
radius then this diameter 54 and this
5:39
radius then this diameter 54 and this core diameter of
5:42
core diameter of
5:42
core diameter of 12. We will also define this uh diameter
5:45
12. We will also define this uh diameter
5:45
12. We will also define this uh diameter 12 and 24 in the section as well. Now
5:52
here we will define this cut. So select
5:57
here we will define this cut. So select
5:57
here we will define this cut. So select this point and this point
6:03
and this is of 18 mm.
6:08
and this is of 18 mm.
6:08
and this is of 18 mm. And now let's move it
6:11
And now let's move it
6:11
And now let's move it now.
6:13
now.
6:13
now. we will off the frame and we will insert
6:16
we will off the frame and we will insert
6:16
we will off the frame and we will insert a center mark. So click on this diameter
6:20
a center mark. So click on this diameter
6:20
a center mark. So click on this diameter and then click on here add a circle
6:23
and then click on here add a circle
6:23
and then click on here add a circle center line. So you can see that the
6:25
center line. So you can see that the
6:25
center line. So you can see that the center mark is added.
6:28
center mark is added.
6:28
center mark is added. And now we will insert a center line. So
6:32
And now we will insert a center line. So
6:32
And now we will insert a center line. So select this and this and from drop-down
6:35
select this and this and from drop-down
6:36
select this and this and from drop-down select add a center line between the two
6:38
select add a center line between the two
6:38
select add a center line between the two lines and say okay.
6:40
lines and say okay.
6:40
lines and say okay. Similarly here, select this and this and
6:43
Similarly here, select this and this and
6:43
Similarly here, select this and this and add a center line between the two lines.
6:47
add a center line between the two lines.
6:48
add a center line between the two lines. Okay. Now select these two lines and uh
6:53
Okay. Now select these two lines and uh
6:53
Okay. Now select these two lines and uh go with the horizontal dimension. You
6:55
go with the horizontal dimension. You
6:55
go with the horizontal dimension. You can also give the dimension by offing
6:57
can also give the dimension by offing
6:57
can also give the dimension by offing the frame.
7:00
the frame.
7:00
the frame. So this is of a 12 but this is a
7:03
So this is of a 12 but this is a
7:03
So this is of a 12 but this is a diameter. So I will add a prefix.
7:06
diameter. So I will add a prefix.
7:06
diameter. So I will add a prefix. Similarly, I will select these two lines
7:09
Similarly, I will select these two lines
7:09
Similarly, I will select these two lines and uh
7:11
and uh
7:12
and uh define the horizontal dimension of 24.
7:18
And let's define the width
7:24
means a depth which is of 3 mm.
7:28
means a depth which is of 3 mm.
7:28
means a depth which is of 3 mm. And now let's uh define the 6 mm
7:32
And now let's uh define the 6 mm
7:32
And now let's uh define the 6 mm dimensions.
7:34
dimensions.
7:34
dimensions. Set it to the 6 mm
7:38
Set it to the 6 mm
7:38
Set it to the 6 mm and let's on the C point and let's
7:42
and let's on the C point and let's
7:42
and let's on the C point and let's define the total height
7:45
define the total height
7:46
define the total height with the vertical dimension 63.
7:50
with the vertical dimension 63.
7:50
with the vertical dimension 63. Now we will also define this 18 mm
7:52
Now we will also define this 18 mm
7:52
Now we will also define this 18 mm dimension here.
7:55
dimension here.
7:55
dimension here. Select these two points and go with the
7:58
Select these two points and go with the
7:58
Select these two points and go with the horizontal dimension 18. So this is the
8:02
horizontal dimension 18. So this is the
8:02
horizontal dimension 18. So this is the two dimensions I'm showing. So I will
8:05
two dimensions I'm showing. So I will
8:05
two dimensions I'm showing. So I will make this dimension as a reference.
8:08
make this dimension as a reference.
8:08
make this dimension as a reference. So here I will uh
8:12
So here I will uh
8:12
So here I will uh add a bracket
8:19
and let's move the top a little bit
8:22
and let's move the top a little bit
8:22
and let's move the top a little bit bottom and let's lock it
8:26
bottom and let's lock it
8:26
bottom and let's lock it in bottom. Then lock it.
8:33
Now we will also define this dimension
8:39
horizontal dimension.
8:45
Now uh we will insert a side view.
8:49
Now uh we will insert a side view.
8:49
Now uh we will insert a side view. So we will select our body and uh go
8:53
So we will select our body and uh go
8:53
So we will select our body and uh go with some projection group.
8:57
with some projection group.
8:57
with some projection group. And here I will place my sign view.
9:02
And here I will place my sign view.
9:02
And here I will place my sign view. save. Okay. And I will also
9:06
save. Okay. And I will also
9:06
save. Okay. And I will also lock it.
9:09
lock it.
9:09
lock it. Now here I will define this cut width
9:13
Now here I will define this cut width
9:13
Now here I will define this cut width with a horizontal dimension of 15 mm.
9:18
with a horizontal dimension of 15 mm.
9:18
with a horizontal dimension of 15 mm. And now I will select these two and make
9:22
And now I will select these two and make
9:22
And now I will select these two and make it a total of six.
9:25
it a total of six.
9:25
it a total of six. And let's also define the total width in
9:28
And let's also define the total width in
9:28
And let's also define the total width in the side view as well.
9:33
Select these two points.
9:36
Select these two points.
9:36
Select these two points. So if you are facing in a selection then
9:39
So if you are facing in a selection then
9:39
So if you are facing in a selection then zoom it
9:41
zoom it
9:41
zoom it and with the horizontal dimension of 36.
9:46
and with the horizontal dimension of 36.
9:46
and with the horizontal dimension of 36. Now here I'm also seeing the point. So I
9:49
Now here I'm also seeing the point. So I
9:49
Now here I'm also seeing the point. So I will select this and this and
9:53
will select this and this and
9:53
will select this and this and go with the vertical dimension of 63.
9:56
go with the vertical dimension of 63.
9:56
go with the vertical dimension of 63. Now I will select this two arc and add a
10:01
Now I will select this two arc and add a
10:01
Now I will select this two arc and add a center mark.
10:03
center mark.
10:03
center mark. Now this uh slot center
10:07
Now this uh slot center
10:07
Now this uh slot center dimension I will define from the
10:09
dimension I will define from the
10:09
dimension I will define from the horizontal
10:11
horizontal
10:11
horizontal the
10:13
the
10:13
the dimension of 33.01 but I will make it uh
10:19
dimension of 33.01 but I will make it uh
10:19
dimension of 33.01 but I will make it uh round of 33. And now slot center to
10:24
round of 33. And now slot center to
10:24
round of 33. And now slot center to center dimension I will define. Select
10:27
center dimension I will define. Select
10:27
center dimension I will define. Select this and this
10:30
this and this
10:30
this and this and set it to the
10:39
12. And now let's define the radius of
10:43
12. And now let's define the radius of
10:43
12. And now let's define the radius of this slot.
10:47
Okay.
10:49
Okay.
10:50
Okay. Now we will off the frame. So you can
10:53
Now we will off the frame. So you can
10:53
Now we will off the frame. So you can see that
10:55
see that
10:55
see that we have
10:57
we have
10:57
we have given all essential dimension which are
11:00
given all essential dimension which are
11:00
given all essential dimension which are required for the manufacturing.
11:02
required for the manufacturing.
11:02
required for the manufacturing. And
11:05
And
11:05
And now
11:06
now
11:06
now we will insert our isometric view. So
11:10
we will insert our isometric view. So
11:10
we will insert our isometric view. So before that let's create some uh space.
11:14
before that let's create some uh space.
11:14
before that let's create some uh space. So let's uh on the frame. So I will move
11:17
So let's uh on the frame. So I will move
11:17
So let's uh on the frame. So I will move my base view little bit left hand side
11:22
my base view little bit left hand side
11:22
my base view little bit left hand side and I will unlock my section view
11:26
and I will unlock my section view
11:26
and I will unlock my section view and
11:28
and
11:28
and I will move to the left hand side
11:35
and then I will lock it. Then I will
11:37
and then I will lock it. Then I will
11:37
and then I will lock it. Then I will lock unlock my side view.
11:41
lock unlock my side view.
11:41
lock unlock my side view. I will move it
11:44
I will move it
11:44
I will move it and lock it. Now I will move this 33
11:48
and lock it. Now I will move this 33
11:48
and lock it. Now I will move this 33 dimension
11:53
closer to the edge. And now I will uh
11:58
closer to the edge. And now I will uh
11:58
closer to the edge. And now I will uh go to the my model tab.
12:01
go to the my model tab.
12:01
go to the my model tab. From here I will set it my model fit
12:04
From here I will set it my model fit
12:04
From here I will set it my model fit all. And then I will set it to the
12:07
all. And then I will set it to the
12:07
all. And then I will set it to the isometric.
12:09
isometric.
12:09
isometric. And here you will see one camera icon.
12:11
And here you will see one camera icon.
12:11
And here you will see one camera icon. Click on it and click on crop image and
12:15
Click on it and click on crop image and
12:15
Click on it and click on crop image and say okay
12:17
say okay
12:17
say okay and go to the
12:19
and go to the
12:19
and go to the your drawing page and draw it. Now here
12:23
your drawing page and draw it. Now here
12:23
your drawing page and draw it. Now here I will make it little bit uh larger. So
12:26
I will make it little bit uh larger. So
12:26
I will make it little bit uh larger. So my scale is 1 0 1 to 1. So I will make
12:30
my scale is 1 0 1 to 1. So I will make
12:30
my scale is 1 0 1 to 1. So I will make it 1.5.
12:33
it 1.5.
12:33
it 1.5. And here
12:36
And here
12:36
And here I will uh increase the height. So 102.
12:41
I will uh increase the height. So 102.
12:41
I will uh increase the height. So 102. So let's make it 120
12:44
So let's make it 120
12:44
So let's make it 120 or uh
12:46
or uh
12:46
or uh 135.
12:48
135.
12:48
135. Let's make it 150
12:52
Let's make it 150
12:52
Let's make it 150 or 135.
12:54
or 135.
12:54
or 135. Yes. And now I will
12:59
move it.
13:03
And here I will uh the side view. I will
13:07
And here I will uh the side view. I will
13:07
And here I will uh the side view. I will unlock it and I will move it
13:11
unlock it and I will move it
13:11
unlock it and I will move it to
13:13
to
13:13
to left hand side.
13:15
left hand side.
13:15
left hand side. I will lock it. Then I will select the
13:17
I will lock it. Then I will select the
13:17
I will lock it. Then I will select the sections and lock it.
13:20
sections and lock it.
13:20
sections and lock it. And
13:23
And
13:23
And I will
13:25
I will
13:25
I will move this 63 dimensions to the poster
13:30
move this 63 dimensions to the poster
13:30
move this 63 dimensions to the poster and then I will again
13:35
and then I will again
13:35
and then I will again unlock my
13:37
unlock my
13:37
unlock my side view
13:40
side view
13:40
side view move it
13:44
and lock it
13:46
and lock it
13:46
and lock it off the frame.
13:50
So here
13:52
So here
13:52
So here you can uh see that we have placed the
13:55
you can uh see that we have placed the
13:55
you can uh see that we have placed the all the orthographic view and isometric
13:58
all the orthographic view and isometric
13:58
all the orthographic view and isometric view. Now let's move to the title block
14:00
view. Now let's move to the title block
14:00
view. Now let's move to the title block field.
14:02
field.
14:02
field. So to edit the title block field you
14:04
So to edit the title block field you
14:04
So to edit the title block field you must on the frame. So here is a
14:07
must on the frame. So here is a
14:07
must on the frame. So here is a stainless steel material. So you can
14:09
stainless steel material. So you can
14:09
stainless steel material. So you can edit the material general as not scale.
14:12
edit the material general as not scale.
14:12
edit the material general as not scale. I will always provide the not to scale.
14:17
I will always provide the not to scale.
14:17
I will always provide the not to scale. And uh here I will insert my title.
14:21
And uh here I will insert my title.
14:21
And uh here I will insert my title. Title is too long. So I will just say
14:24
Title is too long. So I will just say
14:24
Title is too long. So I will just say technical drawing in frecat. Instead of
14:27
technical drawing in frecat. Instead of
14:27
technical drawing in frecat. Instead of component drawing I will
14:30
component drawing I will
14:30
component drawing I will give a part drawing.
14:34
give a part drawing.
14:34
give a part drawing. And in preparation and here in a name I
14:37
And in preparation and here in a name I
14:37
And in preparation and here in a name I will give my name.
14:43
I will give my name.
14:47
I will give my name.
14:47
I will give my name. here. Okay. And here is the drawing
14:49
here. Okay. And here is the drawing
14:49
here. Okay. And here is the drawing number. You can give language, date and
14:52
number. You can give language, date and
14:52
number. You can give language, date and here most important thing is the logo.
14:56
here most important thing is the logo.
14:56
here most important thing is the logo. So to insert my logo, I will go to the
14:58
So to insert my logo, I will go to the
14:58
So to insert my logo, I will go to the tech draw tech draw views. Insert bit
15:00
tech draw tech draw views. Insert bit
15:00
tech draw tech draw views. Insert bit map image. I will go to the my existing
15:04
map image. I will go to the my existing
15:04
map image. I will go to the my existing project folder
15:07
project folder
15:07
project folder and uh I will insert my logo
15:14
and I will move it but my logo is small.
15:18
and I will move it but my logo is small.
15:18
and I will move it but my logo is small. Uh size of the logo areas is small but
15:22
Uh size of the logo areas is small but
15:22
Uh size of the logo areas is small but my logo is bigger. So I will make it to
15:25
my logo is bigger. So I will make it to
15:25
my logo is bigger. So I will make it to the 0 4 scale
15:29
the 0 4 scale
15:29
the 0 4 scale and I will
15:31
and I will
15:31
and I will place it here.
15:35
place it here.
15:35
place it here. Now I will of the frame.
15:41
So this is how we have successfully
15:44
So this is how we have successfully
15:44
So this is how we have successfully created a technical drawing in Frecad
15:47
created a technical drawing in Frecad
15:47
created a technical drawing in Frecad with respect to the orthographic view.
15:51
with respect to the orthographic view.
15:52
with respect to the orthographic view. And uh this is a very good example how
15:54
And uh this is a very good example how
15:54
And uh this is a very good example how to create a technical drawing with the
15:57
to create a technical drawing with the
15:57
to create a technical drawing with the help of a tech draw workbench. So this
15:59
help of a tech draw workbench. So this
16:00
help of a tech draw workbench. So this is all about this tutorial drawing
16:02
is all about this tutorial drawing
16:02
is all about this tutorial drawing creation in a free cat. Thank you for
16:05
creation in a free cat. Thank you for
16:05
creation in a free cat. Thank you for watching and thank you for your valuable
16:07
watching and thank you for your valuable
16:07
watching and thank you for your valuable time.
16:09
time.
16:09
time. [Music]
16:35
Heat. Heat.
16:38
Heat. Heat.
16:38
Heat. Heat. [Music]