videocam_off
This livestream is currently offline
Check back later when the stream goes live
Up next in 10
In this video, I go over the LISEN SuctionPro Phone Mount
Check it out here https://geni.us/J1dLi
Want FREE Shipping With Amazon Prime? Get a 30-DAY FREE TRIAL by signing up here http://www.amazon.com/tryprimefree?tag=thechrisreview-20
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Show More Show Less View Video Transcript
0:00
So this is my dad's car and he currently has no phone holder
0:02
So I'm going to be installing this one for him. This is going to be the Listen. And this is the electric vacuum magnetic phone mount
0:08
And it comes in a small box. So let's check it out. And for starters, we get this plastic baggie that has the instructions
0:15
An important notice. An adhesive. A dry and a wet wipe. This clear adhesive
0:19
A magnetic positioning card. And this adhesive MagSafe magnet. And some other stuff that comes in the box is going to be the USB-A to USB-C cable
0:26
And the suction mount itself. So I'm looking over the instructions and because I do have a phone that does have MagSafe already installed on this, I can ignore a few steps and a few things, which is going to be these three things
0:39
I don't need this template to line up where to put the MagSafe, I don't need the magnetic ring, and I don't need this plastic protector
0:46
And this is the iPhone 16 Pro Max and it easily just attaches like that and this looks pretty strong
0:52
So let me just give it a good shake and yeah, this is not coming off at all
0:57
And so right here is where I'm going to be installing this and it does have a bit of a curvature, but I think it's fine
1:01
As long as it's not these other things which it recommends not to do which is some rough surfaces
1:06
Such as like some grainy texture some leather surfaces or some surfaces with large grains then I should be fine
1:13
But if necessary, it also does come with this base plate and this is going to be this clear thing
1:17
So I guess if it was any of those I could put it but i just going to save this for I guess something else and now it just time to install this here And it has this plastic piece which can just be taken right off And the cool thing about this is that it vacuum suctioned
1:33
It says press and pull up to detach. And the way to actually attach it is pretty simple
1:39
Just put this down on the surface and there's going to be this vacuum suction that's going to work
1:43
I'll put it so that I can see the button in the front. And I'll place it on the most flat surface possible
1:48
which will probably be like right around here so right there and then I give it a push and you're
1:55
going to hear the vacuum so that was really cool I never had one of these mounts these suction
2:04
mounts and okay it was actually pretty strong yeah nothing's going on so I guess when I just
2:13
push it down it'll begin to suction it again and if I want to take it off it says just
2:17
press and pull up to detach. So I'll press it. And actually, yeah, that comes off really easily
2:24
And I guess here you could see maybe a little bit of the mechanism. So yeah, I can rotate this all
2:28
around, move this, the hand moves around too. And now time to actually put my phone here. So again
2:35
here's the iPhone 16 Pro Max. There, it fits easily on top of it. And I can also try it with
2:41
Another phone, this is the Samsung Galaxy Z Flip 7. And yeah fits perfectly there Now this one gonna be a little bit longer so I can exactly open this up all the way But if I put it sideways it be able to do its thing like this And once again if I want to take this off just hold the button right here and it comes right off
2:59
So now let me put this somewhere else, which is going to be on my desk. And there it is
3:05
So now it's doing its thing, and even my cat got interested in it. And there, now it's as tight as can be
3:11
and because this is a flat surface this is probably going to hold on to it much tighter than on the
3:17
car so okay i'm trying to pull it out and yeah this is very tight on this it's a lot tighter
3:25
than in the car and this time yeah the noise is still going and this time what i can do is actually
3:31
attach the usb-c cable on the back uh or no over here on the side and there you can see it's red
3:38
and I'm pretty sure this just charges it up because when I put my phone on top of it
3:42
it does not charge. So this isn't a wireless charger. This is more of just actually charging
3:47
the magnetic vacuum part of it. And now I have a cool little phone stand over here
3:52
which is actually pretty handy because what I used to use was like another phone stand I have
3:58
here. But this is kind of handier because if I'm watching something, I can be working over here on
4:02
the right side on my laptop and then I could be watching something on the left here or I can just
4:06
use this kind of like a screensaver or something just to tell time. And in case you're wondering
4:10
where else this vacuum foam mount can fit well it also fits on this mirror right here All right and because this is going to be a medicine cabin I could just literally open it I kind of use it as a handle and my phone
4:23
will fit just like so. And actually, what's cool about this, this is literally the perfect position
4:28
if I want to use this as a mount for a camera. So if I'm filming myself or something like that
4:33
I could do that. And because it does have this arm, I can actually get some pretty good angles
4:37
I could angle it downwards like this, angle it upwards, slide it around like this, and
4:43
I can even pull the arm out even more. Let me see
4:47
Oh yeah, yeah, I can get some pretty wild angles around here
4:52
From this all the way to lean back, to lean forward. Yeah, this is really good
4:57
And also, because it fits on the mirror, this is definitely going to fit on the wall too
5:02
So let's test it out on this wall right here. Let me hold it
5:07
all right and there and yeah it's holding it pretty tight and once again i could use it like
5:16
this literally just like a portable tripod actually yeah so this is pretty useful but yeah overall i'm
5:22
pretty happy with this little listen electric vacuum phone mount but yeah if you're looking
5:27
for something to hold your phone whether it be in the car on your desk in the bathroom on walls just
5:32
to use it for literally just like a full mount or I guess semi like a tripod if you're filming a lot
5:38
of stuff definitely check this one out by listen
#Computers & Electronics
#Car Electronics
#Vehicle Modification & Tuning