Up next in 10
Mido Rattan Nightstand Review
0 views
Jul 12, 2025
In this video, I review the Mido Rattan Nightstand. Check it out here: https://amzn.to/3PWk2eZ DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
View Video Transcript
0:00
Hey, Chris here and my Rattan nightstand just came in
0:02
So we're going to go ahead and take a look at it and assemble it. Yeah, so everything seems to come in nicely packed over here
0:07
And the first thing I see is going to be the setup instruction guide. It's in bottom boards, drawer boards, backboard, floor board, bottom board, top board, drawer boards, longer drawer boards, hinges and screws, screwdriver, and the side boards
0:22
There's a lot of screws in here. Here's the hinges, additional hardware. So the first thing the instructions say is to connect these blue connectors and all the boards just on the holes here
0:33
So these are gonna be the boards with the screws and turns out I only had to do a few of them and then here are the ones that I didn't end up using
0:39
Now the next step is gonna go ahead and be to actually open up these hinges which would be right over here
0:44
So here's the hinges and I got to go ahead and disassemble them And the way I found out to do them was by just moving this plastic clip at the bottom and I can just pull them apart just like so
0:53
So next thing is I gotta go ahead and grab two of these boards, board one and board two, so I can go ahead and screw these rails onto here with these screws over here
1:03
So they have little perforated holes one two three and four And this is what it looks like after it done So what I have to make sure is that the end is on this side where it thicker
1:17
And the other side just goes right over here. Next thing to do is grab board three and four and then just connect them in like so
1:25
This little piece can be put in over here and then twisted. And then we can get this piece back
1:30
This is piece one over here. Put it down here. piece four, piece three over here. And then they just go on all these over here
1:40
And then right over here, these things will go here and here. And then same thing as before
1:45
just go ahead and twist them tight. And it's good to go. And then I grab piece five
1:55
and this can go right over here, all the way in the front. And this also has to be twisted
2:00
so these holes are on the outside just like so. And then finally this is what we have and now we can grab the other side of this
2:10
which should be right here and this can just be placed right on top And then same thing right here right here right here and right here I need to put those screws there And this is what we have so far And now this is going to go ahead
2:27
and be the top piece number six and I could just put this right on top over here. Next we can go
2:38
ahead and assemble the drawers. We're going to need this part. These can just slide over here
2:42
and then the board can just go right in between here and then finally this part can go on top
2:48
all right so this is the first drawer complete and now time to work on the second one
3:06
there that's the second drawer done now all right just like before the next thing to do
3:11
would put the rails on the actual drawers. So the plastic bit right over here would go ahead
3:17
and have to face the opposite direction. And this is how the front would look like. And that just goes right down there
3:22
All right I finished the second drawer Now the next thing to put would be the handle And this is what the little baggy looks like Here the handle itself and the screws are all the way over here And here what this one looks like with the handle And there what the second one looks like And now we can go ahead and
3:36
just put it on the shelf over here. And this is the finished assembly of the night state and I think
3:45
it came out looking really nice. And I just put my laptop and my phone on top of it just so you can
3:49
see an example of how big it is. And then on the first drawer over here, I did end up putting just
3:55
a little bit of PJs, which is something I'd keep. And then for the second drawer, just to give you
4:01
an idea of how spacious it can be, it can even fit my Air Force in here. Yeah, and I still didn't
4:09
remove these stickers, but there are a few over it that do have to be removed. Yeah, like here
4:15
and then some are hidden but there's nothing on the outside that I see so far which is pretty good
4:22
You also do have space at the bottom. I didn't really put anything over here and one thing I do
4:27
like about these drawers is this perforation over here. I think it'll end up looking real nice
4:33
but yeah that's a quick overview of the Rattan nightstand
#Computers & Electronics