How To Assemble The PELEGON Toilet Safety Rails

This is how to assemble the Pelagon toilet safety rails

So here's everything it comes with. We have the left and right handrails, the four feet, the seat clamps, bolts, washers

extra parts, and the instruction booklet. So the first thing I do is to grab the left and right rails, and we're going to attach

them together. Simply start by opening it up like this, and then opening up the other side

And then these two pieces can stick together. you do need a little bit of force and once you reach that there's going to be this button here

just give it a press push it in and it'll lock in place and I'll just leave it at this setting for

now now it's time to lock these arms in place and we could start by heading over to the back

and you can see this is the back by reading this part over here and now it's time to grab those

C clamps and these can just go right inside here make sure the holes are aligned and you can just

push it through just like that that's one there's two now for the other side

there's three and there is four so now it's time for the feet and I'm gonna

flip this upside down so it's a little bit easier and we're gonna start in the

back so here's what the foot looks like and right here is gonna be the hole

we going to screw it in and I start at the backside here and make sure the hole is aligned and we going to grab that washer with the round portion facing inside and then grab that screw and then screw it in Now you may have to move the leg a little bit

just so it's level with it but afterwards there just like that and I'll tighten it in so it's

nice and secure and that's good and then do the same thing for the other three legs

so here's what it looks like now let's head over to bathroom to install this so I could just place

this here and there it is and this is actually at a very low setting this is the lowest setting

so I want to raise the legs up and to do so that's going to be pretty easy

you see right over here where that button is just press it I'm going to twist it all the way to the

side and I'm going to pull the leg as far back as possible so it's going to be at the tallest

setting. I'll do that for all these legs. There it's two, there three and four

Now I can place this here and because this bathroom is kind of on the small side you

can see that the right part is very close to here so I actually want to make this narrower

There, just like that. And now it feels a lot better. And now it's ready to be used

Yeah, that's a quick look at how to install the Pelagon toilet safety rails