0:01
Hello friends welcome to solid work
0:02
tutorial and in this tutorial we will
0:05
model this uh index guide as for our
0:09
isometric drawing as you can see that I
0:11
have already modeled it and I will show
0:14
you from the scratch how you can do the
0:17
same in solid works so I will close this
0:19
file and create a new
0:22
file you can also visit my website macn
0:26
nexus.com and you can visit this solid
0:30
Works tutorials tab where I have written
0:33
so many tutorials on solid works where
0:36
you can follow the step byst step guide
0:42
parts if you like my method of teaching
0:44
then you can also support me on kofi.com
0:47
you can buy me a cup of coffee your
0:51
small support will help this channels to
0:54
grow and it will motivate me to create
0:57
more awesome content on solid works so
1:00
let's come back to our
1:03
tutorial so here I have created a new
1:09
now we will uh read our drawing and uh
1:13
we will model it so first thing which we
1:16
can see that uh this dimensions are in
1:19
inches so we will go here and select
1:25
second you can also go to the options
1:28
tab then documents properties and then
1:31
units and then you can also change the
1:36
here now the first thing which we will
1:39
see with our model is that this feature
1:41
is this so we will select the front
1:45
plane and uh click on the sketch and uh
1:57
circles first we will constra the inner
2:01
one inner one inner one is a 1.5
2:05
in and uh outer one is a 2
2:17
in and now we will uh close our
2:23
sketch we will rotate our sketch and uh
2:27
click on extrude and we will extrude it
2:42
now we will create a DM plane at a88 in
2:47
for this phas so we will select this pH
2:51
go to the reference geometry select the
2:53
plane and uh do the value 88
2:58
in and from here we will select the clip
3:06
okay and now we will select this plane
3:13
sketch and we will switch to the normal
3:19
it and first thing which we will do is
3:24
geometry and make it for the
3:28
construction and here here we will
3:37
construction we will select the circle
3:40
tool and create a circle and uh make it
3:47
construction and this this is the PCD
3:55
given so we will select it and give it a
4:08
di so this is the BCD diameter here it
4:12
is given radius 2.25 R so we have
4:15
multiped by two to get the diameter and
4:19
now if you see here it is a 1.5 in
4:26
so select these two points and view
4:34
1.5 and make it symmetric from the
4:46
2 and now we will slightly draw two
4:51
straight lines select the line
5:25
and first we will add the tangent
5:33
and tangent and this radius is5 R select
5:44
and5 select this and this and make it
5:55
now we will create a threo tar at the
6:26
now the first thing which we will do is
6:29
to add the tangency at four
6:32
locations so we will select this and
6:37
tangent similarly this and
6:43
tangent similarly this and
6:46
this tangent and here as
6:55
now this this radius and this would be
7:00
concentrate so we will make it
7:12
now here is a angle of 30° is
7:16
given so first we will make this Center
7:26
uh coincidence and now
7:37
now we will select a construction
7:44
line and uh make it a
7:50
construction move it to the outside and
7:54
join this uh Arc center with origin
8:01
construction similarly join this center
8:08
origin and uh make it a
8:12
construction and now we will give the
8:37
and if you see this radius is A5 R so
8:49
0.5 so you can see that our sketch is
8:54
constrained we will come out of
9:00
exclusion select the exclusion
9:04
and select the profile and from here
9:08
directions and give the exclusion of a
9:21
now we will remove the this slot
9:25
material here so we will select the face
9:33
normal and now we will on our previous
9:43
uh we will select the face and click on
9:46
the sketch we will go to the slot and
9:49
here we will select the threo slot so we
9:54
will select this point this
10:02
slot and uh this is the 625 select smart
10:22
tangency select this and this
10:27
and let's see uh it is not a concentric
10:31
so we will select it and make it
10:35
concentric so it is fully
10:37
constrain and now we will hide our
10:43
sketch so benefit with is that once we
10:47
modified our previous sketch slot will
10:49
get modified with this construction
10:51
Circle so that is the benefit now we
10:55
will select the sketch and click on it
10:57
short cut and from here we will say
11:07
now we will uh create a datam plane at
11:13
A1 1.75 in from this pH so we will
11:17
select this pH and in the reference
11:20
geometry we will go to the plane and you
11:26
1.75 and we will select the flip
11:33
upset and uh select the plane and click
11:44
normal click on height
12:00
and we will select a three-point
12:28
Theo and now we will give the dimension
12:30
so if we see here from the center to
12:33
this Center is a 2 in select smart
12:37
Dimension select origin and this point
12:51
so radius so we will do 56 * 2
13:00
and we will select this origin and this
13:05
line and press the equal symbol and
13:08
select this Dimension divide by
13:11
two click on okay so this is the fully
13:17
sketch now we will come out of
13:21
it select the sketch click on
13:25
extrude and extrude it to the 44 in
13:37
now we will create here a hole so we
13:41
will select the phase and click on the
13:52
sketch select d uh smart dimensions and
14:03
click on the exit sketch select the
14:05
sketch click on EX code and from here
14:09
say it's full all say
14:14
okay so this is how we have made this uh
14:20
guide I hope you have enjoyed this
14:23
tutorial and this tutorial is designed
14:25
for the beginner user those who have
14:27
just started learning the part modeling
14:30
in a solid works if you have enjoyed
14:33
this tutorial then you can also support
14:35
me on a coffee.com you can buy me a cup
14:37
of coffee link is given in a video
14:40
description your small support will help
14:43
these channels to grow so this is all
14:46
about this tutorial I will come with
14:48
more useful tutorial like this on solid
14:50
works for beginner user thank you for
14:53
watching and thank you for your valuable
