Up next in 10
FreeCAD Part Modeling Tutorial | FreeCAD Tutorial | 3D Modeling | Learn FreeCAD | Mechnexus |
Sep 20, 2025
#freecad #freecadtutorial #learnFreeAD In this video I have explained How to Model Part in FreeCAD with the help of part design Workbench. ▶️ Get my Complete FreeCAD Course : From Zero to Expert ! https://ko-fi.com/s/1ab4385434 ▶️ Join my channel membership and keep supporting my work: https://www.youtube.com/channel/UCcn6z2whMaFu-_LDsEXCfVA/join ▶️ Visit my website for more info on FreeCAD-: https://mechnexus.com/ ▶️ Download Source File of Tutorial-: https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ ▶️ Buy Me a Coffee I am very grateful that you watch my videos and I am constantly trying to improve the quality of the videos on this channel. If you'd like to help me do this, please consider supporting me so that I can to continue to produce content for your enjoyment. 👉 Help support this channel by buying me a coffee: https://ko-fi.com/mechnexus
View Video Transcript
0:00
Hello friends, welcome to Fria tutorial
0:03
Hello friends, welcome to Fria tutorial
0:03
Hello friends, welcome to Fria tutorial and in this tutorial we will model this
0:05
and in this tutorial we will model this
0:05
and in this tutorial we will model this uh housing and uh you can see that I
0:09
uh housing and uh you can see that I
0:09
uh housing and uh you can see that I have already model it and uh if we see
0:13
have already model it and uh if we see
0:13
have already model it and uh if we see the section
0:18
along the y-axis.
0:26
So you can see that uh our uh section
0:30
So you can see that uh our uh section
0:30
So you can see that uh our uh section view is uh also matching with the
0:34
view is uh also matching with the
0:34
view is uh also matching with the section view shown in the model here. It
0:37
section view shown in the model here. It
0:37
section view shown in the model here. It is a 1/4 section and my section is half.
0:41
is a 1/4 section and my section is half.
0:41
is a 1/4 section and my section is half. So
0:43
So
0:43
So let's uh on our main body and on the
0:48
let's uh on our main body and on the
0:48
let's uh on our main body and on the main view and uh you can see that main
0:51
main view and uh you can see that main
0:51
main view and uh you can see that main view and section view both I have shown.
0:54
view and section view both I have shown.
0:54
view and section view both I have shown. So in this tutorial we will uh read this
0:57
So in this tutorial we will uh read this
0:57
So in this tutorial we will uh read this orthographic view and uh we will create
1:00
orthographic view and uh we will create
1:00
orthographic view and uh we will create this uh housing in a free.
1:04
this uh housing in a free.
1:04
this uh housing in a free. So for this tutorial I'm using the freet
1:06
So for this tutorial I'm using the freet
1:06
So for this tutorial I'm using the freet version 1.0. So you must have at least
1:10
version 1.0. So you must have at least
1:10
version 1.0. So you must have at least 1.0 or a higher version than this. So I
1:15
1.0 or a higher version than this. So I
1:15
1.0 or a higher version than this. So I will close this file and create a new
1:18
will close this file and create a new
1:18
will close this file and create a new file.
1:23
You can also visit my website
1:25
You can also visit my website
1:25
You can also visit my website macexus.com
1:27
macexus.com
1:27
macexus.com where I write articles and tutorials on
1:30
where I write articles and tutorials on
1:30
where I write articles and tutorials on a free CAD and you can read articles and
1:35
a free CAD and you can read articles and
1:35
a free CAD and you can read articles and tutorials in your language. Here I have
1:38
tutorials in your language. Here I have
1:38
tutorials in your language. Here I have provided the vast variety of language
1:41
provided the vast variety of language
1:41
provided the vast variety of language where you have to select the language
1:44
where you have to select the language
1:44
where you have to select the language and uh articles and tutorials will be
1:47
and uh articles and tutorials will be
1:47
and uh articles and tutorials will be get translated. Like here I have
1:50
get translated. Like here I have
1:50
get translated. Like here I have selected the French and you can see that
1:52
selected the French and you can see that
1:52
selected the French and you can see that it got translated in a French.
1:56
it got translated in a French.
1:56
it got translated in a French. You can also follow the stepbystep
1:59
You can also follow the stepbystep
1:59
You can also follow the stepbystep tutorials guide on my website. For
2:01
tutorials guide on my website. For
2:01
tutorials guide on my website. For example, here is a part modeling
2:03
example, here is a part modeling
2:03
example, here is a part modeling tutorial 145. And if you go on this
2:08
tutorial 145. And if you go on this
2:08
tutorial 145. And if you go on this tutorial, so here I have inserted the 2D
2:11
tutorial, so here I have inserted the 2D
2:11
tutorial, so here I have inserted the 2D drawings and I have uh inserted the
2:15
drawings and I have uh inserted the
2:15
drawings and I have uh inserted the respective stepbystep images with the
2:18
respective stepbystep images with the
2:18
respective stepbystep images with the instructions to model the part.
2:22
instructions to model the part.
2:22
instructions to model the part. You can also access my mechanical 3D
2:25
You can also access my mechanical 3D
2:25
You can also access my mechanical 3D part library
2:28
part library
2:28
part library where I have inserted so many mechanical
2:31
where I have inserted so many mechanical
2:31
where I have inserted so many mechanical model.
2:33
model.
2:33
model. To access this part all you have to
2:36
To access this part all you have to
2:36
To access this part all you have to click on the image then you will be get
2:39
click on the image then you will be get
2:39
click on the image then you will be get directed to the Google drive where you
2:41
directed to the Google drive where you
2:42
directed to the Google drive where you will get the free get part as well as
2:44
will get the free get part as well as
2:44
will get the free get part as well as its 2D drawing.
2:47
its 2D drawing.
2:47
its 2D drawing. You can download this parts and modify
2:50
You can download this parts and modify
2:50
You can download this parts and modify it and use it in your projects. There is
2:54
it and use it in your projects. There is
2:54
it and use it in your projects. There is no any need to give the credits.
2:57
no any need to give the credits.
2:57
no any need to give the credits. This gallery is heavy. So it might take
3:00
This gallery is heavy. So it might take
3:00
This gallery is heavy. So it might take five to 10 second time to load it. You
3:04
five to 10 second time to load it. You
3:04
five to 10 second time to load it. You can also access my 2D drawing library
3:08
can also access my 2D drawing library
3:08
can also access my 2D drawing library where I have uploaded so many mechanical
3:12
where I have uploaded so many mechanical
3:12
where I have uploaded so many mechanical 2D drawing in the form of a PDF. You can
3:17
2D drawing in the form of a PDF. You can
3:17
2D drawing in the form of a PDF. You can click on the image then you will get the
3:19
click on the image then you will get the
3:19
click on the image then you will get the PDF version of a drawing.
3:22
PDF version of a drawing.
3:22
PDF version of a drawing. You can download this drawing and uh you
3:25
You can download this drawing and uh you
3:25
You can download this drawing and uh you can create 3D model
3:28
can create 3D model
3:28
can create 3D model with respect to the dimensions shown and
3:31
with respect to the dimensions shown and
3:31
with respect to the dimensions shown and uh you can also see that uh how I
3:34
uh you can also see that uh how I
3:34
uh you can also see that uh how I provided the technical details.
3:38
provided the technical details.
3:38
provided the technical details. If you like my method of teaching and my
3:41
If you like my method of teaching and my
3:41
If you like my method of teaching and my contributions toward the 3D part library
3:44
contributions toward the 3D part library
3:44
contributions toward the 3D part library of a free CAD, you can support me on
3:46
of a free CAD, you can support me on
3:46
of a free CAD, you can support me on coffi.com.
3:48
coffi.com.
3:48
coffi.com. You can buy me a cup of coffee. Your
3:51
You can buy me a cup of coffee. Your
3:51
You can buy me a cup of coffee. Your small support will help these channels
3:53
small support will help these channels
3:53
small support will help these channels to grow and it will motivate me to
3:56
to grow and it will motivate me to
3:56
to grow and it will motivate me to create more awesome content on a free
3:58
create more awesome content on a free
3:58
create more awesome content on a free CAD. You can find my coffee donation
4:03
CAD. You can find my coffee donation
4:03
CAD. You can find my coffee donation link in a video descriptions and uh you
4:06
link in a video descriptions and uh you
4:06
link in a video descriptions and uh you can also see my coffee page URL on my
4:10
can also see my coffee page URL on my
4:10
can also see my coffee page URL on my website here.
4:13
website here.
4:13
website here. So let's come back to our tutorial.
4:19
So here I have created a new file and
4:21
So here I have created a new file and
4:21
So here I have created a new file and then now insert a body and now I will on
4:23
then now insert a body and now I will on
4:24
then now insert a body and now I will on the origin plane and if we see the
4:29
the origin plane and if we see the
4:29
the origin plane and if we see the section view. So main
4:32
section view. So main
4:32
section view. So main portion is to create a half of the one
4:37
portion is to create a half of the one
4:37
portion is to create a half of the one side and then use the revolve tool to
4:40
side and then use the revolve tool to
4:40
side and then use the revolve tool to create this. So the base
4:44
create this. So the base
4:44
create this. So the base sketch will be this hatch section shown
4:47
sketch will be this hatch section shown
4:47
sketch will be this hatch section shown on the drawing. So for this as per the
4:51
on the drawing. So for this as per the
4:51
on the drawing. So for this as per the part orientation we will select this
4:54
part orientation we will select this
4:54
part orientation we will select this exact plane which is our front plane and
4:58
exact plane which is our front plane and
4:58
exact plane which is our front plane and create a sketch. Now I will switch to
5:00
create a sketch. Now I will switch to
5:00
create a sketch. Now I will switch to the model tab and hide the origin.
5:04
the model tab and hide the origin.
5:04
the model tab and hide the origin. And here I will uh
5:08
And here I will uh
5:08
And here I will uh create a rectangle
5:11
create a rectangle
5:12
create a rectangle and I will delete this line.
5:15
and I will delete this line.
5:15
and I will delete this line. And the first thing which I will do is
5:18
And the first thing which I will do is
5:18
And the first thing which I will do is to constrain the outer diameter.
5:22
to constrain the outer diameter.
5:22
to constrain the outer diameter. So select the smart dimension. Select
5:24
So select the smart dimension. Select
5:24
So select the smart dimension. Select this and this and provide the 200
5:29
this and this and provide the 200
5:29
this and this and provide the 200 radius.
5:31
radius.
5:31
radius. And now
5:34
And now
5:34
And now let's uh move the line.
5:38
let's uh move the line.
5:38
let's uh move the line. And now
5:41
And now
5:41
And now provide the vertical dimension 16.
5:48
And uh now we will create uh two line at
5:52
And uh now we will create uh two line at
5:52
And uh now we will create uh two line at uh angle
5:54
uh angle
5:54
uh angle and select a smart dimension. Provide
5:57
and select a smart dimension. Provide
5:57
and select a smart dimension. Provide this 120.
6:01
Select this and this and add a parallel.
6:06
Select this and this and add a parallel.
6:06
Select this and this and add a parallel. And let's add a parallel distance of uh
6:10
And let's add a parallel distance of uh
6:10
And let's add a parallel distance of uh 20 mm.
6:13
20 mm.
6:13
20 mm. And now
6:16
And now
6:16
And now we will stress this line.
6:20
we will stress this line.
6:20
we will stress this line. And here there is a angle of 100°. So we
6:25
And here there is a angle of 100°. So we
6:25
And here there is a angle of 100°. So we will uh again select a line tool and
6:29
will uh again select a line tool and
6:29
will uh again select a line tool and create a line. Select a smart dimension.
6:31
create a line. Select a smart dimension.
6:31
create a line. Select a smart dimension. Provide this and this
6:34
Provide this and this
6:34
Provide this and this 100°.
6:38
So here
6:42
we will delete this. This is the 160 not
6:46
we will delete this. This is the 160 not
6:46
we will delete this. This is the 160 not 100
6:48
100
6:48
100 160.
6:50
160.
6:50
160. So drawing quality is not good. But uh
6:54
So drawing quality is not good. But uh
6:54
So drawing quality is not good. But uh if you zoom it you can see it. And now
6:59
if you zoom it you can see it. And now
6:59
if you zoom it you can see it. And now here we'll stress this and select a line
7:03
here we'll stress this and select a line
7:04
here we'll stress this and select a line tool and draw one horizontal line
7:09
tool and draw one horizontal line
7:09
tool and draw one horizontal line which is this age.
7:13
which is this age.
7:13
which is this age. Now let's uh constrain it. Select this
7:16
Now let's uh constrain it. Select this
7:16
Now let's uh constrain it. Select this and this and uh do it 125.
7:22
Now select the line tool and again
7:25
Now select the line tool and again
7:25
Now select the line tool and again create a line
7:27
create a line
7:27
create a line and this is of 160.
7:32
and this is of 160.
7:32
and this is of 160. Let's
7:35
Let's
7:35
Let's so total height is of 160. Select the
7:37
so total height is of 160. Select the
7:37
so total height is of 160. Select the smart dimension
7:41
160.
7:43
160.
7:43
160. And now
7:45
And now
7:45
And now here this uh angle angle is given in a
7:48
here this uh angle angle is given in a
7:48
here this uh angle angle is given in a detail view
7:50
detail view
7:50
detail view here. So this angle will be of 100.
7:57
Select this and this and give it 100 mm.
8:01
Select this and this and give it 100 mm.
8:01
Select this and this and give it 100 mm. And now
8:04
And now
8:04
And now let's uh move it. Select the line tool.
8:09
let's uh move it. Select the line tool.
8:09
let's uh move it. Select the line tool. Draw the vertical line. And uh this is
8:12
Draw the vertical line. And uh this is
8:12
Draw the vertical line. And uh this is of uh dimension 60 from the axis. Select
8:17
of uh dimension 60 from the axis. Select
8:17
of uh dimension 60 from the axis. Select this and this.
8:19
this and this.
8:19
this and this. Give it 60. Now
8:23
Give it 60. Now
8:23
Give it 60. Now again draw the horizontal line.
8:26
again draw the horizontal line.
8:26
again draw the horizontal line. And this vertical line is of 20.
8:31
And this vertical line is of 20.
8:31
And this vertical line is of 20. Now select the line tool.
8:35
Now select the line tool.
8:35
Now select the line tool. Draw the vertical line.
8:38
Draw the vertical line.
8:38
Draw the vertical line. Select again line tool. draw the
8:40
Select again line tool. draw the
8:40
Select again line tool. draw the horizontal line
8:43
horizontal line
8:43
horizontal line and again one vertical line.
8:49
Now
8:50
Now
8:50
Now let's constrain the
8:54
let's constrain the
8:54
let's constrain the dimensions which are the not fully
8:56
dimensions which are the not fully
8:56
dimensions which are the not fully constrained. So if we see here
9:00
constrained. So if we see here
9:00
constrained. So if we see here we have defined the total height we have
9:02
we have defined the total height we have
9:02
we have defined the total height we have defined this and we will define this
9:04
defined this and we will define this
9:04
defined this and we will define this point
9:06
point
9:06
point we will uh give it a dimension of 100
9:10
we will uh give it a dimension of 100
9:10
we will uh give it a dimension of 100 mm. So this and this constraint we will
9:13
mm. So this and this constraint we will
9:13
mm. So this and this constraint we will fix one by one line. So now this point
9:16
fix one by one line. So now this point
9:16
fix one by one line. So now this point is unconstrained.
9:18
is unconstrained.
9:18
is unconstrained. So this is the
9:22
So this is the
9:22
So this is the radius of 50 mm. This is the bore size.
9:26
radius of 50 mm. This is the bore size.
9:26
radius of 50 mm. This is the bore size. If you see here the 100 is given. So we
9:29
If you see here the 100 is given. So we
9:29
If you see here the 100 is given. So we will select this and this provide it of
9:32
will select this and this provide it of
9:32
will select this and this provide it of 50. And now
9:37
select this and this provide it of 50 mm
9:43
select this and this provide it of 50 mm
9:43
select this and this provide it of 50 mm which we can see here. And now
9:47
which we can see here. And now
9:47
which we can see here. And now select a my dimension
9:50
select a my dimension
9:50
select a my dimension provide it 30.
9:53
provide it 30.
9:53
provide it 30. And now
9:57
now fix this point.
10:00
now fix this point.
10:00
now fix this point. So to fix this point here is a this is
10:05
So to fix this point here is a this is
10:05
So to fix this point here is a this is of a 60 mm. So we will select a smart
10:08
of a 60 mm. So we will select a smart
10:08
of a 60 mm. So we will select a smart dimension.
10:11
dimension.
10:11
dimension. Give it a 60.
10:14
Give it a 60.
10:14
Give it a 60. So now if we go to the
10:17
So now if we go to the
10:18
So now if we go to the here and if we of the dimension so we
10:20
here and if we of the dimension so we
10:20
here and if we of the dimension so we can see the clear view. So now we have
10:23
can see the clear view. So now we have
10:23
can see the clear view. So now we have to constrain this four lines. So on it
10:28
to constrain this four lines. So on it
10:28
to constrain this four lines. So on it and now
10:30
and now
10:30
and now select the smart dimensions. Select this
10:32
select the smart dimensions. Select this
10:32
select the smart dimensions. Select this and the axis
10:34
and the axis
10:34
and the axis provide it 115.
10:37
provide it 115.
10:37
provide it 115. And now here if you see there is a arc.
10:41
And now here if you see there is a arc.
10:41
And now here if you see there is a arc. So we will extend it.
10:44
So we will extend it.
10:44
So we will extend it. And uh here we will select arc by 3
10:48
And uh here we will select arc by 3
10:48
And uh here we will select arc by 3 point.
10:53
Select tangent.
10:56
Select tangent.
10:56
Select tangent. Select tangent.
11:01
Give you the 10. So our sketch is fully
11:03
Give you the 10. So our sketch is fully
11:04
Give you the 10. So our sketch is fully constrained.
11:06
constrained.
11:06
constrained. And now let's uh move the dimensions so
11:09
And now let's uh move the dimensions so
11:09
And now let's uh move the dimensions so that uh you can see the clear view how I
11:13
that uh you can see the clear view how I
11:13
that uh you can see the clear view how I have constrain it.
11:23
So this is the fully constrained sketch.
11:27
So this is the fully constrained sketch.
11:27
So this is the fully constrained sketch. We can off the dimension and we can see
11:29
We can off the dimension and we can see
11:29
We can off the dimension and we can see our neat and clean profile. Now we will
11:32
our neat and clean profile. Now we will
11:32
our neat and clean profile. Now we will come out of the sketch. We will select
11:35
come out of the sketch. We will select
11:35
come out of the sketch. We will select the sketch, use the revolve tool and say
11:38
the sketch, use the revolve tool and say
11:38
the sketch, use the revolve tool and say okay. So this is the first base feature
11:41
okay. So this is the first base feature
11:42
okay. So this is the first base feature and uh it was the most challenging part
11:45
and uh it was the most challenging part
11:45
and uh it was the most challenging part to create a fully constrained half
11:48
to create a fully constrained half
11:48
to create a fully constrained half profile. Now
11:51
profile. Now
11:51
profile. Now creating the rest of the feature is
11:53
creating the rest of the feature is
11:53
creating the rest of the feature is easy. So let's first save our part. I
11:57
easy. So let's first save our part. I
11:57
easy. So let's first save our part. I will uh give it a revision
12:00
will uh give it a revision
12:00
will uh give it a revision R1. And now let's move to the next
12:04
R1. And now let's move to the next
12:04
R1. And now let's move to the next feature. So next feature is that we will
12:07
feature. So next feature is that we will
12:07
feature. So next feature is that we will create a cut. So for this we will select
12:10
create a cut. So for this we will select
12:10
create a cut. So for this we will select the phase and click on the sketch. We
12:13
the phase and click on the sketch. We
12:13
the phase and click on the sketch. We will switch to the
12:15
will switch to the
12:15
will switch to the isometric for the right orientation.
12:18
isometric for the right orientation.
12:18
isometric for the right orientation. And now here
12:21
And now here
12:22
And now here we will uh
12:24
we will uh
12:24
we will uh see the detail view. So if you see here
12:27
see the detail view. So if you see here
12:27
see the detail view. So if you see here the detail D is shown which is this one.
12:31
the detail D is shown which is this one.
12:31
the detail D is shown which is this one. And if we see here, so there is a angle
12:37
And if we see here, so there is a angle
12:37
And if we see here, so there is a angle is given.
12:40
is given.
12:40
is given. So we will uh
12:46
we will create one line
12:50
we will create one line
12:50
we will create one line and we will make it construction
12:53
and we will make it construction
12:53
and we will make it construction and this is of a angle of 25.
13:02
Yes, this is the angle 25. And now we
13:05
Yes, this is the angle 25. And now we
13:06
Yes, this is the angle 25. And now we will uh project the outer diameter.
13:11
will uh project the outer diameter.
13:11
will uh project the outer diameter. And
13:14
here we will create uh one more line
13:19
here we will create uh one more line
13:19
here we will create uh one more line which will be perpendicular to this 25°
13:23
which will be perpendicular to this 25°
13:23
which will be perpendicular to this 25° angle. Set it perpendicular.
13:26
angle. Set it perpendicular.
13:26
angle. Set it perpendicular. And we will also make it symmetric
13:30
And we will also make it symmetric
13:30
And we will also make it symmetric with this construction line.
13:33
with this construction line.
13:33
with this construction line. And here
13:36
And here
13:36
And here dimension 60 is a given.
13:39
dimension 60 is a given.
13:39
dimension 60 is a given. But we will
13:42
But we will
13:42
But we will first create the two line and this will
13:46
first create the two line and this will
13:46
first create the two line and this will be the parallel with the construction
13:49
be the parallel with the construction
13:49
be the parallel with the construction line.
13:51
line.
13:51
line. Set it parallel. And now select the line
13:54
Set it parallel. And now select the line
13:54
Set it parallel. And now select the line tool
13:57
tool
13:57
tool and this and this will be the
14:00
and this and this will be the
14:00
and this and this will be the perpendicular.
14:01
perpendicular.
14:01
perpendicular. So now here is a fillet R10 which we
14:04
So now here is a fillet R10 which we
14:04
So now here is a fillet R10 which we will give later. And now
14:08
will give later. And now
14:08
will give later. And now here we will create one point on this uh
14:12
here we will create one point on this uh
14:12
here we will create one point on this uh construction line. Select the point and
14:15
construction line. Select the point and
14:15
construction line. Select the point and select the diameter and add a
14:17
select the diameter and add a
14:17
select the diameter and add a coincidence.
14:19
coincidence.
14:19
coincidence. Now select the smart dimension and from
14:22
Now select the smart dimension and from
14:22
Now select the smart dimension and from this point to this point dimension is of
14:25
this point to this point dimension is of
14:25
this point to this point dimension is of 32
14:27
32
14:27
32 and uh let's give this uh rough
14:30
and uh let's give this uh rough
14:30
and uh let's give this uh rough dimension let's give the 60
14:34
dimension let's give the 60
14:34
dimension let's give the 60 and uh this one is of 60.
14:41
and uh this one is of 60.
14:41
and uh this one is of 60. So here our basic idea is to remove the
14:45
So here our basic idea is to remove the
14:45
So here our basic idea is to remove the material.
14:47
material.
14:47
material. The important dimension is a 60 width
14:50
The important dimension is a 60 width
14:50
The important dimension is a 60 width and from this point we have given the
14:52
and from this point we have given the
14:52
and from this point we have given the 32. So this 60 and 32 is are the
14:55
32. So this 60 and 32 is are the
14:55
32. So this 60 and 32 is are the important. Now I will uh come out of it.
15:01
important. Now I will uh come out of it.
15:01
important. Now I will uh come out of it. Select this page. Click on the pocket
15:04
Select this page. Click on the pocket
15:04
Select this page. Click on the pocket and set it through all. Save. Okay.
15:10
Now we will uh see. So we have perfectly
15:14
Now we will uh see. So we have perfectly
15:14
Now we will uh see. So we have perfectly created. Now there is a radius of R10.
15:17
created. Now there is a radius of R10.
15:17
created. Now there is a radius of R10. So I will press control key and select
15:20
So I will press control key and select
15:20
So I will press control key and select these two edges. You can also select the
15:22
these two edges. You can also select the
15:22
these two edges. You can also select the fillet and then select the edge.
15:25
fillet and then select the edge.
15:25
fillet and then select the edge. Then click on the fillet and here
15:29
Then click on the fillet and here
15:29
Then click on the fillet and here provide the 10 mm and say okay. Now we
15:34
provide the 10 mm and say okay. Now we
15:34
provide the 10 mm and say okay. Now we will polar pattern it. The total
15:36
will polar pattern it. The total
15:36
will polar pattern it. The total quantity is of four on the left hand
15:39
quantity is of four on the left hand
15:39
quantity is of four on the left hand side and four on the right hand side.
15:42
side and four on the right hand side.
15:42
side and four on the right hand side. So select the pocket. Select the fillet
15:45
So select the pocket. Select the fillet
15:45
So select the pocket. Select the fillet and click on the polar pattern
15:48
and click on the polar pattern
15:48
and click on the polar pattern and give here the quantity it
15:52
and give here the quantity it
15:52
and give here the quantity it and say okay.
15:56
Now the next feature we will create is
15:59
Now the next feature we will create is
15:59
Now the next feature we will create is the hole. So we will select the face and
16:02
the hole. So we will select the face and
16:02
the hole. So we will select the face and uh click on the sketch. Let's check the
16:05
uh click on the sketch. Let's check the
16:05
uh click on the sketch. Let's check the model orientation.
16:08
model orientation.
16:08
model orientation. So here we will uh first create
16:12
So here we will uh first create
16:12
So here we will uh first create construction circle which will be our
16:15
construction circle which will be our
16:15
construction circle which will be our ECD.
16:16
ECD.
16:16
ECD. Make it construction and uh this is of
16:19
Make it construction and uh this is of
16:19
Make it construction and uh this is of 360 diameter.
16:25
And now we will create a circle which
16:29
And now we will create a circle which
16:29
And now we will create a circle which will be coincidence to this BCD circle
16:33
will be coincidence to this BCD circle
16:33
will be coincidence to this BCD circle and on the axis.
16:36
and on the axis.
16:36
and on the axis. And now select the smart diameter.
16:40
And now select the smart diameter.
16:40
And now select the smart diameter. Give it a 17.5.
16:45
Now close it. Select the sketch. Click
16:48
Now close it. Select the sketch. Click
16:48
Now close it. Select the sketch. Click on the cut and say it to all. Say okay.
16:54
on the cut and say it to all. Say okay.
16:54
on the cut and say it to all. Say okay. Now we will polar pattern it. Select the
16:58
Now we will polar pattern it. Select the
16:58
Now we will polar pattern it. Select the cut and click on the polar pattern. Give
17:01
cut and click on the polar pattern. Give
17:01
cut and click on the polar pattern. Give the quantity
17:03
the quantity
17:03
the quantity eight.
17:05
eight.
17:05
eight. Say okay.
17:08
Say okay.
17:08
Say okay. Now
17:11
Now
17:11
Now let's see the detail view. So here is
17:14
let's see the detail view. So here is
17:14
let's see the detail view. So here is our
17:15
our
17:15
our M14 tapped hole.
17:18
M14 tapped hole.
17:18
M14 tapped hole. So we will select the top face. Click on
17:20
So we will select the top face. Click on
17:20
So we will select the top face. Click on the sketch
17:22
the sketch
17:22
the sketch and uh let's check the model
17:26
and uh let's check the model
17:26
and uh let's check the model orientation.
17:29
orientation.
17:29
orientation. So
17:30
So
17:30
So this tapped hole is on the axis
17:33
this tapped hole is on the axis
17:34
this tapped hole is on the axis with a PCD of 160. So we will uh select
17:37
with a PCD of 160. So we will uh select
17:37
with a PCD of 160. So we will uh select the circle,
17:41
create a circle, make it a construction
17:45
create a circle, make it a construction
17:45
create a circle, make it a construction and uh use it 160.
17:50
And now we will uh create a circle of uh
17:56
And now we will uh create a circle of uh
17:56
And now we will uh create a circle of uh 14 mm. Select a smart dimension.
18:00
14 mm. Select a smart dimension.
18:00
14 mm. Select a smart dimension. Give it a 14. And now select this and
18:04
Give it a 14. And now select this and
18:04
Give it a 14. And now select this and this. Add a coincidence. And select this
18:08
this. Add a coincidence. And select this
18:08
this. Add a coincidence. And select this point of a circle and construction. Add
18:11
point of a circle and construction. Add
18:11
point of a circle and construction. Add a pincidence. Now close it. And now we
18:14
a pincidence. Now close it. And now we
18:14
a pincidence. Now close it. And now we will uh create a hole with a hole
18:18
will uh create a hole with a hole
18:18
will uh create a hole with a hole wizard. And here I will select isometric
18:22
wizard. And here I will select isometric
18:22
wizard. And here I will select isometric regular profile. And thread size is of
18:25
regular profile. And thread size is of
18:25
regular profile. And thread size is of M14.
18:28
M14.
18:28
M14. And here if you see the depth is of a
18:32
And here if you see the depth is of a
18:32
And here if you see the depth is of a 40. So here in a dimension I will give
18:35
40. So here in a dimension I will give
18:35
40. So here in a dimension I will give the 40.
18:37
the 40.
18:37
the 40. And here I will on the threaded and here
18:41
And here I will on the threaded and here
18:41
And here I will on the threaded and here I will give the threaded dimensions of
18:44
I will give the threaded dimensions of
18:44
I will give the threaded dimensions of uh 30.
18:48
And here if you want you can on the
18:52
And here if you want you can on the
18:52
And here if you want you can on the model thread
18:54
model thread
18:54
model thread you can
18:56
you can
18:56
you can also update the thread view if you want.
18:59
also update the thread view if you want.
18:59
also update the thread view if you want. So you can see that now thread is
19:01
So you can see that now thread is
19:02
So you can see that now thread is visible.
19:03
visible.
19:03
visible. Now say okay.
19:08
Now we will polar pattern it. Total
19:11
Now we will polar pattern it. Total
19:11
Now we will polar pattern it. Total quantity is eight. Select the pole.
19:14
quantity is eight. Select the pole.
19:14
quantity is eight. Select the pole. Click on the polar pattern.
19:18
and give the quantity eight.
19:26
So as thread is on so it will take some
19:29
So as thread is on so it will take some
19:29
So as thread is on so it will take some time to update it.
19:35
Now say okay.
19:46
So it will take some
19:48
So it will take some
19:48
So it will take some time to update it. Okay. So it is
19:51
time to update it. Okay. So it is
19:51
time to update it. Okay. So it is updated.
19:53
updated.
19:53
updated. So this is how we have completed this uh
19:57
So this is how we have completed this uh
19:57
So this is how we have completed this uh housing. And if you wanted to see the
20:00
housing. And if you wanted to see the
20:00
housing. And if you wanted to see the section view then go to the view and uh
20:04
section view then go to the view and uh
20:04
section view then go to the view and uh persistent section cut and along the
20:06
persistent section cut and along the
20:06
persistent section cut and along the cutting wire.
20:14
So it is updating.
20:19
Now close it. So here I will off the
20:22
Now close it. So here I will off the
20:22
Now close it. So here I will off the main body and see the sections. So you
20:25
main body and see the sections. So you
20:25
main body and see the sections. So you can see that the thread is perfectly
20:27
can see that the thread is perfectly
20:27
can see that the thread is perfectly created
20:29
created
20:29
created with a thread of a 30 and whole depth of
20:32
with a thread of a 30 and whole depth of
20:32
with a thread of a 30 and whole depth of a 40.
20:35
a 40.
20:35
a 40. And now I will uh off the section and on
20:40
And now I will uh off the section and on
20:40
And now I will uh off the section and on the main body. So this is how we have uh
20:44
the main body. So this is how we have uh
20:44
the main body. So this is how we have uh successfully created this housing in
20:46
successfully created this housing in
20:46
successfully created this housing in frecad with the help of part design
20:49
frecad with the help of part design
20:49
frecad with the help of part design workbench
20:52
workbench
20:52
workbench and uh this is a very interesting model
20:54
and uh this is a very interesting model
20:54
and uh this is a very interesting model to create a wall type of a part in a
20:57
to create a wall type of a part in a
20:57
to create a wall type of a part in a free. So this is all about this
20:59
free. So this is all about this
20:59
free. So this is all about this tutorial. Thank you for watching and
21:01
tutorial. Thank you for watching and
21:01
tutorial. Thank you for watching and thank you for your valuable time.
21:07
Heat. Heat.
21:09
Heat. Heat.
21:09
Heat. Heat. [Music]
21:10
[Music]
21:10
[Music] [Laughter]
21:14
[Laughter]
21:14
[Laughter] [Music]
21:29
Yeah.
21:34
Heat.
21:36
Heat.
21:36
Heat. [Music]