Up next in 10
A real wood cover for your Apple iPad Mini? Sure it looks beautiful, but is it hard to actually put on properly? Dave Taylor from https://www.AskDaveTaylor.com/ finds out with the walnut Toast iPad Mini cover, finding it a bit tricky, but quite doable, with the end result beautiful and satisfying.
Show More Show Less View Video Transcript
0:11
hi Dave Taylor here again and this time
0:14
I want to talk about iPad covers now I
0:16
have my iPad Mini with its little smart
0:19
cover but here's the thing the back kind
0:23
of naked so toast sent us one of their
0:26
really cool wooden iPad covers yes would
0:30
this is actual wood makes me slightly
0:33
anxious to put it on because what if it
0:35
breaks what if it cracks but they assure
0:38
me that doesn't happen and if it does
0:39
they'll work with me so let's go ahead
0:42
I'm gonna swing the camera around and
0:44
look down so you can see what I'm doing
0:46
and let's go ahead and install the toast
0:49
iPad Mini actual real-life honest-to-god
0:53
would cover and then we'll go ahead and
0:55
put the little front piece on - although
0:57
the front piece and the Smart Cover hmm
1:01
well we'll figure it out as we go so
1:03
hang on all right so we're ready to go
1:06
here's our iPad let's go ahead and turn
1:07
it upside down it's clean and I just
1:12
washed my hands so there's no oil or
1:14
grease now let's go ahead and take this
1:16
out of the case before we go any further
1:19
there's actually something else in the
1:20
case - if we can open it up because
1:23
there turns out that there are button
1:25
covers they're somewhere in here no all
1:29
right well we have button covers maybe
1:32
on here
1:33
no no that's interesting well we're
1:36
supposed to have button covers and let
1:38
me start off by showing you this you see
1:40
that piece on the side here that's sort
1:42
of mostly cut out that's if you want to
1:45
use your smart cover the idea is you pop
1:48
it out before you put this on and then
1:51
once it's on you have that side that's
1:53
available for the smart cover to work
1:55
with so pretty slick and all we're gonna
1:58
do is we're gonna go ahead and pull off
2:00
the back film if we can get that to work
2:03
let's see if we can do that without
2:05
trashing the cover does it sound like I
2:09
have some anxiety about this it's
2:10
possible I do
2:12
so here we go whole thing peels off we
2:15
can get that off camera now we're on
2:17
here now of course is the serious task
2:20
so what we want to do is we want to line
2:24
up the buttons and what they recommend
2:26
is you actually come at it from the side
2:29
so let's try that and then you roll it
2:35
on and should be lined up pretty well
2:38
let's see the camera looks like it's
2:42
good maybe a tiny bit high the buttons
2:45
it looks like I'm a little bit high on
2:47
this so let's go ahead and take it off
2:51
and try again just a little bit lower
2:55
let's see how that looks
2:58
now I can look on the side no that's
3:01
actually that's worse
3:04
where we're working it but let's try
3:09
there what do you think I think that
3:13
looks pretty good still maybe a tiny bit
3:17
ahead let's move it back just a tiny bit
3:21
I'm sure glad that these are designed to
3:24
come off and on a couple of times there
3:27
let's try that when it's no got to make
3:31
sure it's square on the device now we
3:35
roll it back gently let's see how it
3:37
looks over the camera that's well not
3:40
perfect so now we roll it from the side
3:44
that we've done on to the device and go
3:49
ahead and just sort of roll down on this
3:53
roll down on the other sides and that's
4:00
most of the work now what they recommend
4:03
is you actually roll it on the surface
4:06
you're working on so you can see I'm
4:08
doing that now including on the edges
4:10
and let's see we're almost done let's do
4:15
the top then we'll do that corner let's
4:20
see well that corner this is pretty good
4:24
not perfect
4:25
but a little bit of enthusiasm we should
4:28
be fine and by the very nature of the
4:31
design of course it's not going to be a
4:33
perfect fit because we taken a flat
4:36
thing and tried to make it certain fit
4:38
on something that's not flat that's okay
4:40
we can live with it so there we have it
4:43
and it looks like it's installed pretty
4:45
well
4:45
now let's go ahead and put the front
4:47
cover on it so I'll pull that in and
4:52
it's easy enough again pull it out and
4:58
gently take this off and all we're gonna
5:01
do is we're gonna actually put the
5:05
plastic on and I'm actually not going to
5:08
install it but you can see you take this
5:10
off and then you just line it up and put
5:14
it on the top here and the reason I'm
5:16
not going to install it is because I
5:18
already actually have a protective film
5:20
on the front so I don't actually need
5:22
that so we're gonna stop here and what
5:26
toast tells us is that as it sits for a
5:32
few minutes it will actually get a
5:34
little stronger and a little tougher so
5:36
there you have it I have successfully
5:39
installed a very nice walnut iPad cover
5:42
so let me switch to being on camera so
5:45
there we have it I have successfully put
5:47
a wooden cover on my iPad and not had a
5:50
heart attack along the way it is a
5:52
little anxiety provoking I will be
5:54
honest because I just was very concerned
5:57
that I was gonna like bend in and do
5:59
this and snap crack but it actually
6:02
turns out to be pretty tough and durable
6:04
and I really like it and I like the fact
6:06
that it's wood because so much of our
6:08
modern technology tends to be plastics
6:11
and Steel's and metals and glass and
6:14
stuff so it's nice to have wood further
6:16
what I also did while the camera was off
6:19
and I was spinning it around is I copped
6:21
off that optional piece on the edge I
6:24
know it's a little hard to see but what
6:25
it does is it lets me use my Smart Cover
6:28
and this now is a complete win in my
6:31
opinion you can see the Smart Cover fits
6:33
very neatly on there and
6:35
a little hard to see the only issue is
6:37
why do I have a blue smart cover when I
6:39
have a walnut back makes me want to go
6:41
get a dark brown smart cover that's a
6:44
whole nother issue anyway so this is
6:47
from company called toast this is the
6:50
toast would cover for the iPad Mini it's
6:53
39 bucks at toast made calm but hang on
6:56
there's more to it because this is
6:59
walnut it also comes in ash bamboo and
7:02
ebony and there's a whole bunch of
7:04
options this is just a plain wooden
7:06
surface there's all sorts of cool things
7:08
we could have done here for example we
7:11
could get a really cool check this out
7:13
skull and crossbones engraving on the
7:16
wood for five bucks is they have a range
7:18
of about five or ten different options
7:20
there you can also get custom text on
7:22
here so I could say abandon hope all ye
7:25
who enter here hunt me in the mail sort
7:27
of goes with this skull and crossbones
7:29
motif the front cover is an additional
7:32
$15 versus the $39 for the back and
7:36
here's what's really cool is I could
7:38
send my own completely unique design
7:40
maybe Cthulhu or something see it's that
7:44
same thing I could have Cthulhu on here
7:46
and for a completely custom design takes
7:49
him a couple of weeks to etch it onto
7:50
the piece of wood but they send it to
7:53
you in its 69 bucks so it's only a
7:55
thirty dollar up charge to be able to
7:57
have this be whatever you want it to say
7:58
happy Anniversary honey
8:00
whatever and it's pretty slick so this
8:05
is the toast wood iPad Mini cover 39
8:09
bucks at toast made calm says Dave
8:13
Taylor and now I need to go and find
8:15
some apps that are also have a walnut
8:18
background to sort of keep the theme
8:19
going anyway see you in my next video