Up next in 10
You've seen people with skins or stickers on the back of their Apple iPad devices. Looks tricky to put them on, doesn't it? In this video I'll show you step by step how I put a cool SkinIt sticker on the back of my new iPad! Video by Dave Taylor of AskDaveTaylor.com
Show More Show Less View Video Transcript
0:07
hi this is dave taylor and today we're
0:09
going to be putting a skin
0:10
on the back of my new ipad also known as
0:13
the ipad 3.
0:15
so we got a skin from a company called
0:17
skin it
0:18
and they have lots and lots of really
0:21
cool graphic designs i'll
0:22
flip this over this is the reveal here's
0:25
the design i had that i picked that i
0:27
really like
0:28
and you can see it's attractive
0:30
unfortunately they come rolled
0:32
so the first thing you have to do is you
0:33
actually have to flatten it
0:35
so i think we're reasonably flat second
0:38
thing or perhaps the first thing you
0:40
really need is an ipad
0:42
and this is an ipad 3 aka the new ipad
0:46
and ready to roll um but we're actually
0:48
obviously going to be putting this on
0:50
the back
0:50
so we're going to move this out of the
0:52
way a little bit and
0:54
i'm going to put a little cloth down
0:55
just because i'm a little paranoid about
0:57
scratches
0:58
hence the putting this on in the first
1:00
place and
1:01
the first thing we're going to need to
1:02
do is we're going to need to clean the
1:04
back of our device
1:05
and to do this i'm actually going to use
1:07
a little spray bottle
1:09
of omnicleans now if you actually go and
1:12
you search for this you'll find well
1:14
it's kind of a screen cleaner
1:16
but it'll still get all the grease and
1:18
oils off so i'll just do one spray
1:21
and then i'll take my little cloth and
1:24
clean it
1:25
and the key is for it to be dry when
1:26
you're done of course
1:28
and since my ipad is only what
1:31
two days old three days old something
1:33
like that it should still be in pretty
1:35
good shape
1:36
one hopes it doesn't get damaged that
1:38
quickly
1:39
but really the important thing is to
1:41
make sure it's dry
1:42
so that was good we're probably going to
1:45
want to take the cover off
1:47
so we'll take the cover off lucky the
1:49
ipad 2 covers work with the ipad 3 so
1:52
that's good we'll put that aside and
1:55
let's see we just want to make sure that
1:56
corners clean
1:58
so there we go the back is clean that's
2:01
step one
2:06
now step two is we're going to bring
2:08
this back into the picture
2:10
and if you look really closely you can
2:12
see there's all sorts of cutouts on the
2:14
edge
2:14
i'll show you here you can see that
2:17
there's little cutouts so it's a pretty
2:20
complicated
2:21
cut that they have here it's not just a
2:23
straight square piece
2:24
and the thing you can use to orient
2:26
yourself is i'll pull this piece off
2:29
that goes there so we'll put that there
2:32
and we're going to actually have to pull
2:34
the entire sheet off
2:36
center it and then place it on the ipad
2:38
and then we'll just go back and forth
2:40
and get the
2:41
air bubbles out now like most of these
2:44
companies skin it includes
2:46
a back and a frame for the front and
2:49
i'll tell you candidly
2:50
i don't put the front frames on because
2:52
i like the black
2:53
because it's very not distracting let me
2:55
rephrase that it doesn't distract me
2:57
that way
2:58
so the front part we're actually never
3:00
going to use we're just going to leave
3:01
it on this big sticker sheet
3:03
which is actually a 3m product if you're
3:06
interested
3:07
but the back now we're ready this is all
3:10
clean
3:10
and dry and this is the scary part
3:14
so here we go you ready so
3:18
i'm going to peel off the sticker
3:22
please come off straight and square
3:26
and there we go luckily i've already
3:28
pulled off you can see
3:29
the hole for the camera and you see that
3:32
that's already pulled off so that's
3:34
handy
3:34
so now the trick obviously is to get it
3:38
all to line up right
3:39
and in my experience it's good to orient
3:43
off the camera
3:45
and then let's see it looks like we're
3:47
not quite right there
3:49
and then there's the bottom where the
3:51
plug goes so between those two things
3:54
that gives you a nice
3:55
way to orient the whole thing let's see
3:59
hmm
3:59
not quite still and
4:03
that's not too anxiety provoking
4:06
let's see i think we're good there let's
4:11
just
4:11
gently curve it around and see how it's
4:14
fitting
4:14
against all the elements on the ipad
4:16
itself
4:19
and as you can see i'm starting from the
4:21
center and doing
4:22
down rather than just doing along the
4:24
sides directly
4:26
it's a folding process and it looks like
4:29
we got it all lined up
4:30
pretty well it's curious i don't know
4:32
what they expected in the design but
4:35
if you look here they've left space for
4:38
a switch of some sort
4:39
i don't really know what that's about
4:41
because there isn't a switch there
4:42
so maybe that's in the ipad 4. maybe
4:45
they have advanced information we don't
4:48
but i'm just going to go ahead and
4:50
gently push this down
4:53
and then run my finger along it
4:57
make sure it's all affixed properly
5:00
and if you've done it right you'll
5:03
notice that
5:04
the sticker comes right up to the edge
5:07
of the switches and it's right on both
5:09
sides of the speaker and everything
5:11
and it's not quite perfect if you look
5:15
can you see there i'll zoom in on this
5:17
you can see it's not quite centered on
5:19
that but
5:20
i think we're okay as long as we can
5:22
still get to the plug that's all that
5:24
really matters
5:25
and there is a little bit of a process
5:28
where i think the skin
5:29
the glue on it actually has to dry but
5:32
now if you can hear there's
5:36
there are some air bubbles that we have
5:38
to work out
5:41
fortunately no therapists are involved
5:43
in working out this particular problem
5:45
and once we get it all done
5:50
um
5:54
and we should be good
5:58
and as you can see it's not a perfect
6:01
job
6:02
matter of fact you know that top part's
6:05
not so good
6:06
let's let's redo that just a slight bit
6:08
because i want to be able to get to the
6:09
headphone jack so
6:10
let's pull this off and maybe i can just
6:13
do just this corner here
6:19
if you're looking at an angle can you
6:21
see that there's still i don't know if
6:23
you can see that on the camera there's a
6:24
lot of air bubbles still so
6:26
we're still going to have to spend some
6:28
time working on this but
6:29
in general that's the process it is a
6:32
little tedious it is a little
6:33
frustrating
6:34
but once you get it done then it's very
6:36
nice because now of course
6:38
i can put my protective cover on it
6:42
and so the front is protected from
6:45
scratching and everything by this
6:47
and then the back is protected by this
6:48
handy sticker so
6:50
easily done if you have to go do it
6:53
maybe once or twice don't be too
6:54
surprised
6:55
and you can cope i'm sure you can make
6:57
this work
6:58
and that's the process and thanks to
7:01
skinit for this
7:02
very cool sticker definitely is going to
7:04
help keep my ipad 3 looking really good
7:07
and i'm sure you can do the same and you
7:10
can have good results too and this is
7:11
dave taylor from ask dave taylor
7:13
and hopefully we'll get this all worked
7:15
out and you too will have a great skin
7:17
on the back of your ipad
7:19
thanks and see you later
7:35
uh
#Online Goodies
#Skins, Themes & Wallpapers