Yaheetech Industrial End Tables Assembly and First Look

Yahi Tech sent me their industrial end tables, so let's check them out

So here's everything that comes in the box. We're going to have the instruction manual, some hardware, the wooden tops, and the legs and support pieces

All right, so first up, I'm going to move these wooden pieces to the side. And we're going to focus on the legs here

And it says to put in the feet at the bottom, which is going to be in this baggie

And this is what the feet look like. So these are just going to be screwed in on the legs, just like so

and same thing on this other one. And now it's time to attach these support pieces to this

And we're going to be using these long bolts in bag B. And when screwing everything in

make sure that these holes are facing upwards. All right, so now it's time to attach the shelves

And I'm going to start with shelf number four, which goes right here in the middle

and we're going to be using these screws and to tighten them up I'm using the small

allen wrench that it comes with just like that and now I can flip this upside down

and do the same thing right over here just like that and now it's time to put the top piece and

to make it easier I'm just going to screw it in from the bottom and we're going to be using the

small A bolts. And then this can be flipped over and there's one of them. And then after about 15

minutes I was able to get the other one done too So here what they look like They look very nice And now let me find a space for them So I placed one over here and one over here in my bedroom because I already have a table

a nightstand over there. So these end tables can also just be used basically as nightstands too

They're going to be three different tiers and they look very solid and also give it a rustic look

And because my bedroom already has like the brown all over, minus that one over there

it fits nicely with it. and here we could take a closer look the sturdy frame and then all the way at the bottom

are those plastic feet and if for some reason your floor isn't level you know like mine isn't i can

always just just like that and then when i go to touch it all around it's not wobbling like it was

before now one thing to note is that these does have the adhesive so i took them off so you can't

really see them anywhere but i think on the other end table right here like the adhesive was stuck a

little bit more or actually maybe it was on this table it's just a little hard to see yeah right

there yeah it is right here so you can't really see much uh but right there the adhesive is still

there so i'd recommend when building it to build it so the adhesive is facing downwards so that

isn't there and if it's there then I usually just use gooby gone and that gets rid of this

real easily but yeah that's a quick look at the Yahitech industrial end tables