Intex Excursion 5 Person Inflatable Boat Installation
Show More Show Less View Video Transcript
0:00
All right, so this is the Intex Excursion 5-Person Inflatable Boat
0:02
So in this video, I just want to do a quick unboxing and set this up and give you my first impressions testing it out over here
0:09
All right, so everything comes in this baggie. And right here, we have the two paddle boards, which sets up pretty easily
0:17
This can be fitted right in here, and it clicks into place. And then same thing for this other part
0:21
And we got both paddles now. And then we also have the manual pump
0:25
And I think these are two gaskets. And we also have an owner's manual. There's also some rope and this little baggie which is going to have these four connector pieces
0:32
And finally the boat itself. And here's everything that has to be inflated. We got the boat over here and then three additional chambers
0:38
And this is going to be the seat with the backrest, the seat with the backrest, and then the middle part
0:44
So now time to inflate all this up. All right so I started pumping this. I put it right over here and then just started going at it
0:50
So it's probably going to take me a while. So I'll be back when I finish all this
0:54
All right so it's been about two minutes and this first chamber is pretty much done
0:58
so I could just take the stop and quickly plug it in. All right, so now it's time for the second chamber
1:02
which is going to be right over here. All right, so it's been about three to four minutes
1:11
and this second chamber is done. So it's going to be taken off and then plugged right in
1:19
And now time for the final, the third chamber right here. And one thing I messed up before
1:23
was accidentally taking this whole thing off because I just have to take off this cap right here
1:27
Yeah, like that. And I can screw this piece back in. And then this can go right inside And we can start the pumping process again All right so the third chamber is nice and blown up It now time to cover this up and now all we
1:43
have left is these three over here. All right that's good
1:55
and go over there and now time for the last one all right that's good and now time to put everything together all right so i put each
2:10
part where it's supposed to go and this is the longer of the two so this is going to go in the
2:14
back this one in the middle and then that one in the front and i'm going to start with this
2:18
front one right over here all right so this part is going to go right here and we got these two
2:22
hooks there so i just want to very carefully stick it in there all right so i put the rest of the
2:28
stuff on and turns out putting these seats was actually really tricky for some reason these
2:33
weren't like attaching so i deflated it it was still tricky so i pushed it in with like a metal
2:38
piece here and it was able to clamp on and same thing for these over here but finally got it all
2:44
together i also ended up attaching this over here that's just like a little pouch to put some stuff
2:49
and also I tie the rope all around over here. Okay, now it's time to take this out over here
2:56
and see how well this works. Look at this beautiful view. You know it, Pookie
3:01
I hope my phone doesn't fall in the water. Please. And there's the first voyage
3:05
on this Intex Excursion 5 boat
#Computers & Electronics


