0:00
If your watch is too tight or like in my case too loose you're going to need to resize your watch
0:04
and so in this video I'm going to show you how to resize this watch band for my Apple Watch
0:08
and you're going to need a tool like this and if you don't have it you can use a paper clip
0:13
Now these links are going to be a little bit different you don't have to fully push the pin
0:17
all the way because these are actually going to be spring loaded so when I push a little bit in
0:21
I can pull the watch up a little bit there or pull this band up and it should come off
0:29
Let me try that one more time. And there. Right here you can see it came off
0:40
And I can kind of pry it loose. And there. So if you look closely, these are different pins than like a regular watch band
0:48
These are actually going to be spring loaded. So here you can see I can actually push this one in
0:53
And so inserting them is going to be a lot easier in here. you can have a look at what it looks like
1:00
Now, in my case, I'm going to remove one link from one side and one link from the other side
1:06
just to make it nice and even. And then basically repeat the same process once more time
1:11
Push it in. And then push this down too. I think I need a little bit more
1:23
There. and now this came loose and I don't need this link anymore so I'll put it away and now time
1:30
to put this back and this is where it can get a little bit tricky so you have to make sure it's
1:46
Kind of like that. And now it's time to push this pin in with the tool itself
1:53
So here I'll go at a different angle so you can see a little bit better
1:57
and actually let me readjust this a little bit there from the back side so here you can see the pin is sticking out so once I push it in
2:12
I'm able to adjust it push it in a little bit more and there and now I kind of got to move it
2:21
until it pops right in place and there it popped in place and now that's nice and tight and it's not
2:26
coming off. So now this side is all set. Now time for the other side. So we're going to repeat the
2:31
same process once more. Just push the pin in, lift it up, take this off, and then one more link
2:43
There. And now we can attach these together. There, this time it's facing upward, so it's a little bit easier to see
2:51
and again push it in push it down and there you heard a little click
2:57
so yep now it's clicked in place and here's where the other two links are
3:03
and if you want save them if you want throw them away but I'll put these on the side for now
3:07
and I have a little baggie where I'll put them in and same thing with the pen now my watch fits a lot nicer
3:15
and there now it's not too loose and it's not too tight so that's how you resize a watch