Up next in 10
Dreamwills Stainless Steel Insulated Water Bottle with Filter Review
Jul 6, 2025
In this video, I review the Dreamwills Stainless Steel Insulated Water Bottle with Filter. Check it out here: https://amzn.to/3ZGHWhI DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
View Video Transcript
0:00
Hey, Chris here, and this is the Dreamwills SL740 water bottle filter, and this is what it looks like
0:07
And so I just want to do a quick overview of it. And just comparison-wise, this is what a regular bottle that I use looks like
0:13
And you can see this one is a bit shorter than the other one
0:17
And then diameter-wise, it's roughly around the same. But what I do feel a difference is this definitely does feel heavier, and that's probably because of the insulation
0:26
It's probably a lot thicker. and so just taking a look at it, logo's at the bottom, this is all a nice matte finish
0:33
It does have a rubber holder over here, which is pretty nice
0:38
And now here's the cap itself, and I'll be able to open it up. It does have a little button right here
0:44
That's a little different than what I have, which is just going to be a screw-on, just like so
0:50
Now this is where the differences come in. For this bottle, for the water bottle filter, it has a straw so I just have to suck through it
0:58
Alright so this one it just has an opening and I just drink like normally like a cup Now when I open it up this is where everything is shown
1:09
And this is going to be the long filter, the housing, the straw, the all-in-one thing
1:14
So the way this comes off is just by a little twist and pull. And then here it is
1:19
Now this is an encasing where the filter goes. So if I twist this, this will pop right open
1:23
And I go ahead and pull it out. And then these are the three things it comes with
1:29
So this is the filter itself, it has to be rinsed for 60 seconds which I already did so it's all good for use
1:37
And then go ahead and be able to put it back. I start with the filter, make sure that the plus is at the bottom
1:43
And then I could put it right over here, that's the right way to put it. And I could just cap it like so, and then twist it, and that's good
1:51
And now to be able to put it here, same thing, I just have to put it up and then twist it a little bit, and now that's all good
1:57
Now next step would be actually putting the water in here and just seeing how it tastes like
2:03
Now I did go ahead and rinse this bottle already too So as you can see it a little bit wet And then same thing for the caps just to make sure I don get any like a rubber taste or anything like that
2:14
So right over here I have my sink which is where I want to go ahead and just fill this bottle up with some water
2:25
Alright so this is cold water which is good. And there I filled it up almost to the top but just left some out just so I can go ahead
2:48
and cap it. And right here you can see how much I have. Oops
2:52
Now I just want to do a comparison of the regular water with the filtered water
2:59
Yeah, that's tap water. Not the best which is why we have this filter to Just like a regular straw I have to suck but because the filter
3:24
is in the center, I do have to put a little bit more power when it comes to sucking so
3:30
So I can draw the water through it. Over here, the walls for this are much thicker
3:35
I just poured it down. These walls are much thicker than the regular bottle that I have
3:43
So it means that this holds a little bit less liquid, but it's gonna go ahead and be insulated
3:47
a lot more. Like right here, the thickness of it. Yeah I feel it's pretty thick
3:52
Probably around, yeah probably this thick. Just a lot. In comparison to this bottle, yeah
4:01
I can feel the walls are a little bit thinner for there
4:05
Yeah, and I can just tell with the weight too. So when I have everything put in place, this feels heavier as well too
4:11
Also worth noting that the filter does have to be changed every two months. But yeah, that's a quick overview of it
#Computers & Electronics