Up next in 10
FreeCAD Technical Drawing Tutorial | FreeCAD Tutorial | FreeCAD Drawing | Mechnexus |
Sep 22, 2025
#freecad #freecadtutorial #freecaddrawing In this video I have explained How to Create Technical Drawing in FreeCAD with Techdraw Workbench ▶️ Get my Complete FreeCAD Course : From Zero to Expert ! https://ko-fi.com/s/1ab4385434 ▶️ Join my channel membership and keep supporting my work: https://www.youtube.com/channel/UCcn6z2whMaFu-_LDsEXCfVA/join ▶️ Visit my website for more info on FreeCAD-: https://mechnexus.com/ ▶️ Download Source File of Tutorial-: https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ ▶️ Buy Me a Coffee I am very grateful that you watch my videos and I am constantly trying to improve the quality of the videos on this channel. If you'd like to help me do this, please consider supporting me so that I can to continue to produce content for your enjoyment. 👉 Help support this channel by buying me a coffee: https://ko-fi.com/mechnexus
View Video Transcript
0:00
Hello friends, welcome to figure
0:02
Hello friends, welcome to figure
0:02
Hello friends, welcome to figure tutorial and in this tutorial we will uh
0:05
tutorial and in this tutorial we will uh
0:05
tutorial and in this tutorial we will uh create a technical drawing of this part.
0:08
create a technical drawing of this part.
0:08
create a technical drawing of this part. As you can see that I have already
0:10
As you can see that I have already
0:10
As you can see that I have already modeled it with respect to the
0:12
modeled it with respect to the
0:12
modeled it with respect to the orthographic view and our figure model
0:15
orthographic view and our figure model
0:15
orthographic view and our figure model is matching with the isometric view of a
0:19
is matching with the isometric view of a
0:19
is matching with the isometric view of a reference drawing.
0:21
reference drawing.
0:21
reference drawing. We will use the tech drawback pench to
0:24
We will use the tech drawback pench to
0:24
We will use the tech drawback pench to create the technical drawing as per the
0:27
create the technical drawing as per the
0:27
create the technical drawing as per the orthographic view and the dimensions
0:29
orthographic view and the dimensions
0:29
orthographic view and the dimensions shown and in some cases we will do
0:34
shown and in some cases we will do
0:34
shown and in some cases we will do some dimensional changes as per our
0:38
some dimensional changes as per our
0:38
some dimensional changes as per our convenience because most of the time the
0:41
convenience because most of the time the
0:41
convenience because most of the time the things which is shown in a refresh may
0:44
things which is shown in a refresh may
0:44
things which is shown in a refresh may not be correct.
0:46
not be correct.
0:46
not be correct. So for this tutorial I am uh using the
0:50
So for this tutorial I am uh using the
0:50
So for this tutorial I am uh using the free version 1.0. So you must have at
0:53
free version 1.0. So you must have at
0:53
free version 1.0. So you must have at least 1.0 or a higher version than this.
0:59
least 1.0 or a higher version than this.
0:59
least 1.0 or a higher version than this. You can visit my website mcnexus.com
1:02
You can visit my website mcnexus.com
1:02
You can visit my website mcnexus.com where I write articles and uh tutorials
1:05
where I write articles and uh tutorials
1:05
where I write articles and uh tutorials on free and here you can see that I have
1:09
on free and here you can see that I have
1:10
on free and here you can see that I have written so many articles on uh free.
1:14
written so many articles on uh free.
1:14
written so many articles on uh free. You can visit the free tutorials tab
1:18
You can visit the free tutorials tab
1:18
You can visit the free tutorials tab where you will find the stepbystep guide
1:22
where you will find the stepbystep guide
1:22
where you will find the stepbystep guide to model a part. Here I have also
1:26
to model a part. Here I have also
1:26
to model a part. Here I have also written so many free tutorials of a
1:29
written so many free tutorials of a
1:29
written so many free tutorials of a part.
1:30
part.
1:30
part. You can also visit my free 3D models by
1:34
You can also visit my free 3D models by
1:34
You can also visit my free 3D models by clicking on the free 3D models tab. And
1:37
clicking on the free 3D models tab. And
1:37
clicking on the free 3D models tab. And here I have uploaded the so many
1:39
here I have uploaded the so many
1:39
here I have uploaded the so many mechanical parts which you can uh
1:43
mechanical parts which you can uh
1:43
mechanical parts which you can uh download, modify and uh use in your
1:47
download, modify and uh use in your
1:47
download, modify and uh use in your projects.
1:49
projects.
1:49
projects. You can also visit my 2D drawing library
1:53
You can also visit my 2D drawing library
1:53
You can also visit my 2D drawing library by clicking on the 2D drawing. Here I
1:55
by clicking on the 2D drawing. Here I
1:55
by clicking on the 2D drawing. Here I have uploaded so many 2D drawings of
1:59
have uploaded so many 2D drawings of
1:59
have uploaded so many 2D drawings of mechanical parts. If you like my method
2:01
mechanical parts. If you like my method
2:02
mechanical parts. If you like my method of teaching, then you can support me on
2:05
of teaching, then you can support me on
2:05
of teaching, then you can support me on coffee.com/macknexus.
2:08
You can buy me a cup of coffee. Your
2:12
You can buy me a cup of coffee. Your
2:12
You can buy me a cup of coffee. Your small support will help this channels to
2:14
small support will help this channels to
2:14
small support will help this channels to grow and uh it will motivate me to
2:17
grow and uh it will motivate me to
2:17
grow and uh it will motivate me to create more awesome content on a free
2:21
create more awesome content on a free
2:21
create more awesome content on a free CAD. So let's come back to our tutorial.
2:28
So to create a technical drawing I will
2:31
So to create a technical drawing I will
2:31
So to create a technical drawing I will uh switch to the tech draw work page
2:36
and here
2:39
and here
2:39
and here I will go to the template library.
2:42
I will go to the template library.
2:42
I will go to the template library. And here I will use
2:47
And here I will use
2:47
And here I will use landscape.
2:51
I use
2:53
I use
2:53
I use A4 landscape
2:56
A4 landscape
2:56
A4 landscape say
2:59
say
2:59
say and now
3:01
and now
3:01
and now I will insert my view. So as I can see
3:04
I will insert my view. So as I can see
3:04
I will insert my view. So as I can see that projection method is used here is
3:07
that projection method is used here is
3:07
that projection method is used here is first angle of projection because the
3:10
first angle of projection because the
3:10
first angle of projection because the top view which we are seeing is a view
3:13
top view which we are seeing is a view
3:13
top view which we are seeing is a view from the top and uh right hand side view
3:16
from the top and uh right hand side view
3:16
from the top and uh right hand side view is viewed from the left. So this is the
3:20
is viewed from the left. So this is the
3:20
is viewed from the left. So this is the our base view. So we will go to the
3:23
our base view. So we will go to the
3:23
our base view. So we will go to the model tab. Select the body and uh click
3:27
model tab. Select the body and uh click
3:27
model tab. Select the body and uh click on the projection view. So here you can
3:31
on the projection view. So here you can
3:31
on the projection view. So here you can see that our first view is inserted. Now
3:35
see that our first view is inserted. Now
3:35
see that our first view is inserted. Now I will rotate it.
3:39
I will rotate it.
3:39
I will rotate it. So this is the
3:43
So this is the
3:43
So this is the base view. And now I will uh insert the
3:47
base view. And now I will uh insert the
3:47
base view. And now I will uh insert the projection group.
3:57
I check this point and will insert the
4:02
I check this point and will insert the
4:02
I check this point and will insert the so this is the first method of
4:05
so this is the first method of
4:05
so this is the first method of first angle of a projection and I have a
4:08
first angle of a projection and I have a
4:08
first angle of a projection and I have a place all the now here I will set my
4:12
place all the now here I will set my
4:12
place all the now here I will set my scale to the base type
4:14
scale to the base type
4:14
scale to the base type and
4:16
and
4:16
and I will say okay
4:22
and now here I will go to the page and
4:26
and now here I will go to the page and
4:26
and now here I will go to the page and set my scale to the 0.5
4:31
set my scale to the 0.5
4:31
set my scale to the 0.5 and let's see.
4:34
and let's see.
4:34
and let's see. So here
4:36
So here
4:36
So here if uh view is not updating then right
4:40
if uh view is not updating then right
4:40
if uh view is not updating then right click the page and set the recmputee and
4:43
click the page and set the recmputee and
4:43
click the page and set the recmputee and wait.
4:52
If it is not updated but the
4:57
If it is not updated but the
4:57
If it is not updated but the projection and see.
5:02
So now it is updated and now this is our
5:05
So now it is updated and now this is our
5:05
So now it is updated and now this is our parent view. So I will remove it.
5:21
I will change the square
5:25
to the
5:28
to the
5:28
to the six.
5:36
save.
5:44
So this is the our three views
5:52
So this is the our three views
5:52
So this is the our three views but here we will take one section.
5:57
but here we will take one section.
5:57
but here we will take one section. So, let's first fix the positions.
6:07
Let's wait.
6:14
Now,
6:18
now here I will select this top view and
6:23
now here I will select this top view and
6:23
now here I will select this top view and go here and click on the sections
6:26
go here and click on the sections
6:26
go here and click on the sections and I will select this section.
6:32
I will give it label A.
6:37
I will give it label A.
6:37
I will give it label A. Click on the live update
6:41
Click on the live update
6:41
Click on the live update and let's
6:55
Now this product view is our base name
7:01
and
7:04
and
7:04
and now let's give the dimension. So here we
7:08
now let's give the dimension. So here we
7:08
now let's give the dimension. So here we are seeing the vertex point. So we can
7:13
are seeing the vertex point. So we can
7:13
are seeing the vertex point. So we can also reduce the
7:16
also reduce the
7:16
also reduce the size of our text point. But in this
7:19
size of our text point. But in this
7:19
size of our text point. But in this case, let's uh update our scale. So we
7:21
case, let's uh update our scale. So we
7:22
case, let's uh update our scale. So we will click on the tap bit.
7:24
will click on the tap bit.
7:24
will click on the tap bit. And here is the template path.
7:28
And here is the template path.
7:28
And here is the template path. I will go here and instead of
7:33
I will go here and instead of
7:33
I will go here and instead of A4 landscape, I will use the A3
7:37
A4 landscape, I will use the A3
7:37
A4 landscape, I will use the A3 landscape. I press enter.
7:40
landscape. I press enter.
7:40
landscape. I press enter. So now you can see that uh power sheet
7:44
So now you can see that uh power sheet
7:44
So now you can see that uh power sheet size is updated and now
7:53
I will also enlarge the view because we
7:56
I will also enlarge the view because we
7:56
I will also enlarge the view because we have enough space now.
8:00
have enough space now.
8:00
have enough space now. So we will go to the page and instead of
8:03
So we will go to the page and instead of
8:03
So we will go to the page and instead of uh 6 let's go with 8.
8:10
So here
8:12
So here
8:12
So here I will edit the loop
8:17
I will edit the loop
8:17
I will edit the loop and say okay
8:22
let's
8:39
Say okay. And now the
8:46
scale
8:48
scale
8:48
scale and let's try with the
8:52
and let's try with the
8:52
and let's try with the scale one.
8:54
scale one.
8:54
scale one. Press enter.
8:57
Press enter.
8:57
Press enter. This is
8:59
This is
8:59
This is this is also the to the scale.
9:03
this is also the to the scale.
9:03
this is also the to the scale. But here
9:07
you can see that the section aa is
9:09
you can see that the section aa is
9:09
you can see that the section aa is small. So we will right click it and
9:13
small. So we will right click it and
9:13
small. So we will right click it and click it.
9:16
click it.
9:16
click it. So now it's scale is also got affected.
9:20
So now it's scale is also got affected.
9:20
So now it's scale is also got affected. And now I will it.
9:26
And now let's give the branch. Now you
9:28
And now let's give the branch. Now you
9:28
And now let's give the branch. Now you can see that point is small.
9:32
can see that point is small.
9:32
can see that point is small. So let's first view dimension of this
9:34
So let's first view dimension of this
9:34
So let's first view dimension of this top view. So let's see the overall
9:37
top view. So let's see the overall
9:37
top view. So let's see the overall width. Select smart dimension.
9:41
width. Select smart dimension.
9:41
width. Select smart dimension. Select this point
9:43
Select this point
9:43
Select this point and this point
9:46
and this point
9:46
and this point and uh give it 50. And select this
9:50
and uh give it 50. And select this
9:50
and uh give it 50. And select this center point and this center point
9:55
center point and this center point
9:55
center point and this center point 100.
10:02
Now center to center is 60.
10:08
Select this
10:10
Select this
10:10
Select this this.
10:16
Select this one dimension
10:19
Select this one dimension
10:19
Select this one dimension and it 60.
10:29
Now here
10:32
Now here
10:32
Now here if you see the border
10:35
if you see the border
10:35
if you see the border so we can easily off it.
10:39
so we can easily off it.
10:39
so we can easily off it. And now here we are seeing the
10:44
And now here we are seeing the
10:44
And now here we are seeing the four circles of this walls but we are
10:47
four circles of this walls but we are
10:47
four circles of this walls but we are not seeing the center line out of the
10:49
not seeing the center line out of the
10:49
not seeing the center line out of the frame. But if you go in a frame, you can
10:51
frame. But if you go in a frame, you can
10:51
frame. But if you go in a frame, you can see the small center mark is there. But
10:54
see the small center mark is there. But
10:54
see the small center mark is there. But we will insert our own center mark. So I
10:57
we will insert our own center mark. So I
10:57
we will insert our own center mark. So I will off the frame. I will press control
11:00
will off the frame. I will press control
11:00
will off the frame. I will press control key. Select all four diameters.
11:06
And here
11:08
And here
11:08
And here here is option of add circle center
11:12
here is option of add circle center
11:12
here is option of add circle center lines. So you can see that now four
11:14
lines. So you can see that now four
11:14
lines. So you can see that now four center mark is inserted. Same way I will
11:17
center mark is inserted. Same way I will
11:17
center mark is inserted. Same way I will select this option and insert the
11:19
select this option and insert the
11:19
select this option and insert the center.
11:21
center.
11:21
center. And now
11:24
And now
11:24
And now let's move to the front view and in the
11:27
let's move to the front view and in the
11:27
let's move to the front view and in the front view
11:29
front view
11:29
front view we will
11:31
we will
11:31
we will on the hidden lines. So I will select
11:34
on the hidden lines. So I will select
11:34
on the hidden lines. So I will select this front view which is our parent view
11:37
this front view which is our parent view
11:37
this front view which is our parent view and I will extend this and here you will
11:41
and I will extend this and here you will
11:41
and I will extend this and here you will see that the hard hidden is false. Make
11:44
see that the hard hidden is false. Make
11:44
see that the hard hidden is false. Make it true.
11:49
And you can see that this view top view
11:53
And you can see that this view top view
11:53
And you can see that this view top view is got move a little bit upper side. So
11:57
is got move a little bit upper side. So
11:57
is got move a little bit upper side. So to avoid these things we will uh lock
12:01
to avoid these things we will uh lock
12:01
to avoid these things we will uh lock the position.
12:03
the position.
12:03
the position. Click on the lock symbol. Now here once
12:05
Click on the lock symbol. Now here once
12:05
Click on the lock symbol. Now here once we insert the lock symbol you will see
12:07
we insert the lock symbol you will see
12:07
we insert the lock symbol you will see one lock here which means that it will
12:10
one lock here which means that it will
12:10
one lock here which means that it will not move.
12:12
not move.
12:12
not move. And now let's off the frame
12:16
And now let's off the frame
12:16
And now let's off the frame and we can see that clearly hidden lines
12:20
and we can see that clearly hidden lines
12:20
and we can see that clearly hidden lines here. So here if you see the diameter
12:24
here. So here if you see the diameter
12:24
here. So here if you see the diameter foot we shown here but this is the not
12:27
foot we shown here but this is the not
12:27
foot we shown here but this is the not the right method to show it because
12:31
the right method to show it because
12:31
the right method to show it because in this drawing section view is not
12:33
in this drawing section view is not
12:33
in this drawing section view is not shown but in our case we have the
12:37
shown but in our case we have the
12:37
shown but in our case we have the section. So we will show this 42
12:39
section. So we will show this 42
12:39
section. So we will show this 42 diameter here. Select it and select a
12:43
diameter here. Select it and select a
12:43
diameter here. Select it and select a smart dimension. And here is a 42 but it
12:47
smart dimension. And here is a 42 but it
12:47
smart dimension. And here is a 42 but it is not diameter. So I will insert the
12:51
is not diameter. So I will insert the
12:51
is not diameter. So I will insert the prefix diameter.
12:53
prefix diameter.
12:53
prefix diameter. Now here we also require a center line.
12:57
Now here we also require a center line.
12:57
Now here we also require a center line. So here I will select this line and this
13:01
So here I will select this line and this
13:01
So here I will select this line and this line and I will go here and select
13:06
line and I will go here and select
13:06
line and I will go here and select center line option.
13:08
center line option.
13:08
center line option. So here is a add a center line between
13:12
So here is a add a center line between
13:12
So here is a add a center line between two lines
13:15
two lines
13:15
two lines and say okay. So center inserted
13:18
and say okay. So center inserted
13:18
and say okay. So center inserted similarly here select these two
13:21
similarly here select these two
13:22
similarly here select these two and add a center line between two lines.
13:25
and add a center line between two lines.
13:25
and add a center line between two lines. say okay
13:27
say okay
13:27
say okay similarly here
13:29
similarly here
13:29
similarly here so like solid works and other software
13:31
so like solid works and other software
13:31
so like solid works and other software you cannot extend it
13:34
you cannot extend it
13:34
you cannot extend it but you can move it with the help of uh
13:40
but you can move it with the help of uh
13:40
but you can move it with the help of uh position option
13:43
position option
13:43
position option here
13:45
here
13:45
here but uh my recommendation is that uh
13:48
but uh my recommendation is that uh
13:48
but uh my recommendation is that uh select again two lines and add a
13:52
select again two lines and add a
13:52
select again two lines and add a center lines and say
13:56
Now at the top as well.
14:03
So now we have a complete center line.
14:06
So now we have a complete center line.
14:06
So now we have a complete center line. And now this uh whole cutout we will
14:09
And now this uh whole cutout we will
14:10
And now this uh whole cutout we will give in the sections. We will not give
14:12
give in the sections. We will not give
14:12
give in the sections. We will not give here. So we will not give 65 dimension.
14:15
here. So we will not give 65 dimension.
14:15
here. So we will not give 65 dimension. We will give this 65 dimension
14:19
We will give this 65 dimension
14:19
We will give this 65 dimension here. So select this line. Select a
14:22
here. So select this line. Select a
14:22
here. So select this line. Select a smart dimension
14:24
smart dimension
14:24
smart dimension and uh view it to 65.
14:28
and uh view it to 65.
14:28
and uh view it to 65. Let's select this age and this age.
14:32
Let's select this age and this age.
14:32
Let's select this age and this age. This dimension here
14:35
This dimension here
14:35
This dimension here and this dimension
14:38
and this dimension
14:38
and this dimension here. And now
14:42
here. And now
14:42
here. And now we will off the frame
14:45
we will off the frame
14:45
we will off the frame on the frame. Sorry. And that we will
14:48
on the frame. Sorry. And that we will
14:48
on the frame. Sorry. And that we will move
14:49
move
14:49
move this front view little to the bottom
14:52
this front view little to the bottom
14:52
this front view little to the bottom side here. And
14:57
side here. And
14:57
side here. And let's move this uh section view
15:03
let's move this uh section view
15:03
let's move this uh section view little bit left hand side and we will
15:05
little bit left hand side and we will
15:05
little bit left hand side and we will use the log lock it. Now here let's uh
15:09
use the log lock it. Now here let's uh
15:09
use the log lock it. Now here let's uh lines the dimensions.
15:14
And now
15:18
or
15:20
or
15:20
or we can do one thing. We can select this
15:23
we can do one thing. We can select this
15:23
we can do one thing. We can select this view, unlock it and we can move it to
15:27
view, unlock it and we can move it to
15:27
view, unlock it and we can move it to the here
15:29
the here
15:29
the here because we have the free space here and
15:31
because we have the free space here and
15:31
because we have the free space here and we will insert this isometric at this
15:33
we will insert this isometric at this
15:33
we will insert this isometric at this location. So that is also a good option.
15:37
location. So that is also a good option.
15:37
location. So that is also a good option. And now
15:42
And now let's uh insert a diameter here.
15:44
And now let's uh insert a diameter here.
15:44
And now let's uh insert a diameter here. Select this. Select
15:47
Select this. Select
15:47
Select this. Select smart dimensions. Select this and uh add
15:51
smart dimensions. Select this and uh add
15:51
smart dimensions. Select this and uh add a prefix of diameter
15:56
and mm have shown 65 we have shown and
16:01
and mm have shown 65 we have shown and
16:01
and mm have shown 65 we have shown and uh there is one more dimension shown in
16:04
uh there is one more dimension shown in
16:04
uh there is one more dimension shown in a reference which is 75. So select this
16:08
a reference which is 75. So select this
16:08
a reference which is 75. So select this and
16:10
and
16:10
and this and select customer dimension
16:13
this and select customer dimension
16:13
this and select customer dimension and give this dimension
16:16
and give this dimension
16:16
and give this dimension 75.
16:19
75.
16:19
75. In fact it is not required but that's
16:21
In fact it is not required but that's
16:21
In fact it is not required but that's okay. And now
16:25
okay. And now
16:25
okay. And now let's give this top diameter here.
16:32
32. Select this and add a prefix
16:36
32. Select this and add a prefix
16:36
32. Select this and add a prefix diameter
16:38
diameter
16:38
diameter 32. And let's also give this diameter
16:44
32. And let's also give this diameter
16:44
32. And let's also give this diameter selector dimension and uh 63.
16:49
selector dimension and uh 63.
16:49
selector dimension and uh 63. Select it and prefix diameter.
16:53
Select it and prefix diameter.
16:53
Select it and prefix diameter. And now
16:57
let's remove the sections to the left
17:00
let's remove the sections to the left
17:00
let's remove the sections to the left hand side here.
17:02
hand side here.
17:02
hand side here. And let's
17:06
And let's
17:06
And let's give some dimensions to the side view.
17:08
give some dimensions to the side view.
17:08
give some dimensions to the side view. So let's also show this diameter 63 here
17:12
So let's also show this diameter 63 here
17:12
So let's also show this diameter 63 here as well.
17:15
as well.
17:15
as well. Select it and insert the prefix
17:17
Select it and insert the prefix
17:17
Select it and insert the prefix diameter.
17:19
diameter.
17:19
diameter. And now
17:22
let's move this front view little bit
17:25
let's move this front view little bit
17:25
let's move this front view little bit down side.
17:29
And here
17:33
let's move this uh
17:35
let's move this uh
17:35
let's move this uh so here instead of uh 1 to one scale
17:40
so here instead of uh 1 to one scale
17:40
so here instead of uh 1 to one scale let's shortened the scale
17:43
let's shortened the scale
17:43
let's shortened the scale to the 0.9
17:46
to the 0.9
17:46
to the 0.9 so that uh
17:50
everything will look perfect. So here
17:54
everything will look perfect. So here
17:54
everything will look perfect. So here once I change the scale it is not
17:56
once I change the scale it is not
17:56
once I change the scale it is not updating. So click on the projection
17:59
updating. So click on the projection
17:59
updating. So click on the projection group and again save. Okay. So it will
18:02
group and again save. Okay. So it will
18:02
group and again save. Okay. So it will recalculate everything.
18:05
recalculate everything.
18:05
recalculate everything. Now I see that uh it is perfect
18:09
Now I see that uh it is perfect
18:09
Now I see that uh it is perfect and here I will also update my section.
18:16
Yes. So here it is updated but sometimes
18:20
Yes. So here it is updated but sometimes
18:20
Yes. So here it is updated but sometimes few dimension may get disturbed. So
18:23
few dimension may get disturbed. So
18:23
few dimension may get disturbed. So delete those dimension. Now
18:27
delete those dimension. Now
18:27
delete those dimension. Now here I have shown the diameter 63 and
18:29
here I have shown the diameter 63 and
18:29
here I have shown the diameter 63 and let's show the total overall height.
18:33
let's show the total overall height.
18:33
let's show the total overall height. Select this point this point and set it
18:37
Select this point this point and set it
18:37
Select this point this point and set it the vertical dimension
18:40
the vertical dimension
18:40
the vertical dimension and let's enter a center mark here in a
18:43
and let's enter a center mark here in a
18:44
and let's enter a center mark here in a side view.
18:45
side view.
18:45
side view. Select this and this and uh add a center
18:50
Select this and this and uh add a center
18:50
Select this and this and uh add a center line between two lines and say okay.
18:54
line between two lines and say okay.
18:54
line between two lines and say okay. Similarly at the bottom side select this
18:58
Similarly at the bottom side select this
18:58
Similarly at the bottom side select this and this and add a center line between
19:01
and this and add a center line between
19:01
and this and add a center line between two lines and say
19:06
now here
19:09
now here
19:09
now here if you see
19:13
in hidden we can see that it is a cut.
19:16
in hidden we can see that it is a cut.
19:16
in hidden we can see that it is a cut. So let's define the
19:20
So let's define the
19:20
So let's define the width and height. So select these two
19:23
width and height. So select these two
19:23
width and height. So select these two lines and add a
19:25
lines and add a
19:26
lines and add a horizontal dimension. I'll select this
19:28
horizontal dimension. I'll select this
19:28
horizontal dimension. I'll select this and this and add a vertical dimension.
19:32
and this and add a vertical dimension.
19:32
and this and add a vertical dimension. And here is a fillet as well of R3. So
19:37
And here is a fillet as well of R3. So
19:37
And here is a fillet as well of R3. So also show the R3. And now here
19:42
also show the R3. And now here
19:42
also show the R3. And now here there is a nothing to show in a section
19:45
there is a nothing to show in a section
19:45
there is a nothing to show in a section view
19:47
view
19:47
view because
19:50
because
19:50
because this hole is through which we can see
19:52
this hole is through which we can see
19:52
this hole is through which we can see here. But for the convenience we will
19:56
here. But for the convenience we will
19:56
here. But for the convenience we will show the hidden lines here.
20:00
show the hidden lines here.
20:00
show the hidden lines here. One
20:02
One
20:02
One center line. So let's select these two
20:04
center line. So let's select these two
20:04
center line. So let's select these two and add another center line. Select okay
20:07
and add another center line. Select okay
20:07
and add another center line. Select okay here.
20:09
here.
20:10
here. Similarly, select this and
20:13
Similarly, select this and
20:13
Similarly, select this and this and
20:16
this and
20:16
this and center line.
20:20
And now here
20:24
let's give this dimension selected
20:28
let's give this dimension selected
20:28
let's give this dimension selected with the 80 and in the front view
20:35
there 120. So this is basically 80 by
20:40
there 120. So this is basically 80 by
20:40
there 120. So this is basically 80 by 120 80 here 20 here
20:43
120 80 here 20 here
20:43
120 80 here 20 here and
20:46
in a front view
20:50
in a front view
20:50
in a front view let's uh show this height as well some
20:53
let's uh show this height as well some
20:53
let's uh show this height as well some of the dimension we are showing at a
20:55
of the dimension we are showing at a
20:55
of the dimension we are showing at a multiple locations and also mention this
21:01
multiple locations and also mention this
21:01
multiple locations and also mention this for R3
21:05
and here let's
21:08
and here let's
21:08
and here let's also shown the total height in the front
21:12
also shown the total height in the front
21:12
also shown the total height in the front view
21:16
and this dimension.
21:23
And now
21:26
And now
21:26
And now let's uh also show this dimension in a
21:28
let's uh also show this dimension in a
21:28
let's uh also show this dimension in a front view as well.
21:31
front view as well.
21:31
front view as well. 63.
21:35
uh select it and add fix.
21:39
uh select it and add fix.
21:39
uh select it and add fix. Now let's off the frame and review our
21:43
Now let's off the frame and review our
21:43
Now let's off the frame and review our drawing. So here
21:48
here now in the top view we will uh show
21:56
here now in the top view we will uh show
21:56
here now in the top view we will uh show this radius here which we have forget.
22:00
this radius here which we have forget.
22:00
this radius here which we have forget. So it's select it and uh select the
22:03
So it's select it and uh select the
22:03
So it's select it and uh select the smart dimension. So it will
22:05
smart dimension. So it will
22:05
smart dimension. So it will automatically pick the radius but this
22:08
automatically pick the radius but this
22:08
automatically pick the radius but this R10 radius has a fourpacial. So I will
22:12
R10 radius has a fourpacial. So I will
22:12
R10 radius has a fourpacial. So I will go here in a format specification
22:15
go here in a format specification
22:15
go here in a format specification and give here the 4x
22:18
and give here the 4x
22:18
and give here the 4x press a space. So this radius is at four
22:21
press a space. So this radius is at four
22:21
press a space. So this radius is at four locations.
22:23
locations.
22:23
locations. And now
22:26
And now
22:26
And now let's uh
22:29
use some other dimensions. So here we
22:32
use some other dimensions. So here we
22:32
use some other dimensions. So here we will show this counter board. So for the
22:35
will show this counter board. So for the
22:35
will show this counter board. So for the counter board here we have a hidden
22:39
counter board here we have a hidden
22:39
counter board here we have a hidden lines here.
22:44
So let's show here instead of taking a
22:46
So let's show here instead of taking a
22:46
So let's show here instead of taking a broken view we will directly show here.
22:50
broken view we will directly show here.
22:50
broken view we will directly show here. Select this and this and select the
22:53
Select this and this and select the
22:53
Select this and this and select the smart dimension. So it is of 13.
22:57
smart dimension. So it is of 13.
22:57
smart dimension. So it is of 13. So select it and add a prefix.
23:01
So select it and add a prefix.
23:01
So select it and add a prefix. Move this 120 and this whole depth is of
23:05
Move this 120 and this whole depth is of
23:05
Move this 120 and this whole depth is of 12 mm. So I can select this and this and
23:17
so it is not taking. So I will specific
23:20
so it is not taking. So I will specific
23:20
so it is not taking. So I will specific select the vertical dimension.
23:26
So it is a 12 mm width.
23:31
And
23:35
here we will show the diameter which we
23:38
here we will show the diameter which we
23:38
here we will show the diameter which we cannot show here. So we will uh
23:43
cannot show here. So we will uh
23:43
cannot show here. So we will uh select it and go here and select
23:46
select it and go here and select
23:46
select it and go here and select diameter.
23:49
diameter.
23:49
diameter. So it is of a diameter 26
23:53
So it is of a diameter 26
23:53
So it is of a diameter 26 and the hole is of a 13 mm. So we can
23:59
and the hole is of a 13 mm. So we can
23:59
and the hole is of a 13 mm. So we can also instead of showing 13 mm here we
24:04
also instead of showing 13 mm here we
24:04
also instead of showing 13 mm here we will delete it and we will select this
24:06
will delete it and we will select this
24:06
will delete it and we will select this and uh select the smart dimension and we
24:11
and uh select the smart dimension and we
24:11
and uh select the smart dimension and we will show this 13 hole with four
24:15
will show this 13 hole with four
24:15
will show this 13 hole with four quantity in a format specifications
24:18
quantity in a format specifications
24:18
quantity in a format specifications say 4x
24:23
and now
24:25
and now
24:25
and now let's uh on the frame
24:27
let's uh on the frame
24:27
let's uh on the frame And
24:30
And
24:30
And let's unlock it so that we can move it.
24:35
let's unlock it so that we can move it.
24:35
let's unlock it so that we can move it. Move it to the town. And again lock it.
24:40
Move it to the town. And again lock it.
24:40
Move it to the town. And again lock it. Now side view
24:44
little bit here. And front view. Let's
24:48
little bit here. And front view. Let's
24:48
little bit here. And front view. Let's move it so that uh we can move this
24:53
move it so that uh we can move this
24:53
move it so that uh we can move this 95 dimension here.
25:12
Now
25:14
Now
25:14
Now let's this 95
25:19
and let's move this 12 mm dimension to
25:22
and let's move this 12 mm dimension to
25:22
and let's move this 12 mm dimension to the outside
25:25
the outside
25:25
the outside And now we will also lock this left
25:29
And now we will also lock this left
25:29
And now we will also lock this left view.
25:34
Let's select and lock it.
25:37
Let's select and lock it.
25:37
Let's select and lock it. And now
25:39
And now
25:39
And now let's arrange dimension in the section
25:41
let's arrange dimension in the section
25:41
let's arrange dimension in the section view.
25:43
view.
25:43
view. So we can move to the outside this
25:47
So we can move to the outside this
25:47
So we can move to the outside this down.
25:49
down.
25:49
down. And here
25:54
we will uh show the radius. So there is
25:57
we will uh show the radius. So there is
25:57
we will uh show the radius. So there is a one radius is here. Select a smart
25:59
a one radius is here. Select a smart
25:59
a one radius is here. Select a smart dimension. So this is of R3. And this
26:03
dimension. So this is of R3. And this
26:03
dimension. So this is of R3. And this radius we will show on the other side.
26:09
And now
26:10
And now
26:10
And now there is a one more radius is here.
26:14
there is a one more radius is here.
26:14
there is a one more radius is here. So the radius if you not show at all
26:17
So the radius if you not show at all
26:17
So the radius if you not show at all location then you can add some common
26:19
location then you can add some common
26:19
location then you can add some common note like this shown on the drawing that
26:21
note like this shown on the drawing that
26:21
note like this shown on the drawing that uh all unspecified radius of R3.
26:29
Now let's uh off the frame and let's see
26:32
Now let's uh off the frame and let's see
26:32
Now let's uh off the frame and let's see how our drawings look like.
26:35
how our drawings look like.
26:35
how our drawings look like. So here at this location this dimension
26:38
So here at this location this dimension
26:38
So here at this location this dimension are two away.
26:41
are two away.
26:41
are two away. So you cannot select the dimension
26:45
So you cannot select the dimension
26:45
So you cannot select the dimension clearly but uh my advice is that always
26:49
clearly but uh my advice is that always
26:49
clearly but uh my advice is that always on the frame and then
26:52
on the frame and then
26:52
on the frame and then move the dimensions.
26:56
Let's move this 15 mm dimension
27:00
Let's move this 15 mm dimension
27:00
Let's move this 15 mm dimension the closer and let's line it.
27:05
the closer and let's line it.
27:05
the closer and let's line it. Now here
27:08
Now here
27:08
Now here we will show this internal diameter.
27:13
we will show this internal diameter.
27:13
we will show this internal diameter. Select it and select smart dimension.
27:16
Select it and select smart dimension.
27:16
Select it and select smart dimension. And this is offer 32. Add a prefix.
27:20
And this is offer 32. Add a prefix.
27:20
And this is offer 32. Add a prefix. Add a prefix. Select it. Now,
27:26
now here we will add one more dimension.
27:29
now here we will add one more dimension.
27:29
now here we will add one more dimension. Select this point and this point and
27:35
Select this point and this point and
27:35
Select this point and this point and add a 15.
27:42
And here
27:45
And here
27:45
And here we will also add a width.
27:53
So here one thing you will observe that
27:55
So here one thing you will observe that
27:55
So here one thing you will observe that uh there is a section A is written but
27:58
uh there is a section A is written but
27:58
uh there is a section A is written but you can place your dimension on a
28:00
you can place your dimension on a
28:00
you can place your dimension on a section A as well and once you add the
28:03
section A as well and once you add the
28:03
section A as well and once you add the frame you will not see that note
28:09
and here
28:11
and here
28:11
and here if we are showing the diameter then it
28:14
if we are showing the diameter then it
28:14
if we are showing the diameter then it is also advisable to insert the center
28:17
is also advisable to insert the center
28:17
is also advisable to insert the center marks. So select these two at the at the
28:21
marks. So select these two at the at the
28:21
marks. So select these two at the at the center line
28:26
and here
28:28
and here
28:28
and here so here is extend by let's uh extend by
28:32
so here is extend by let's uh extend by
28:32
so here is extend by let's uh extend by 15 mm let's see what is happen
28:39
is not
28:41
is not
28:41
is not I'm not sure so I will cancel
28:48
So I will insert here.
28:52
So I will insert here.
28:52
So I will insert here. You can also use the points. So let's uh
28:55
You can also use the points. So let's uh
28:55
You can also use the points. So let's uh this time try with the point. So select
28:57
this time try with the point. So select
28:57
this time try with the point. So select these two points and enter the center
29:01
these two points and enter the center
29:01
these two points and enter the center line between two points and let's see
29:02
line between two points and let's see
29:02
line between two points and let's see how it works.
29:06
So let's try with the points. Select
29:08
So let's try with the points. Select
29:08
So let's try with the points. Select these two points
29:10
these two points
29:10
these two points and add the center line.
29:17
So here we are see
29:21
So here we are see
29:21
So here we are see that some line is also got inserted
29:23
that some line is also got inserted
29:23
that some line is also got inserted here. So delete it
29:26
here. So delete it
29:26
here. So delete it and let's
29:29
and let's
29:29
and let's describe line select this
29:33
describe line select this
29:33
describe line select this and
29:36
save again.
29:40
And now the unnecessary line which we
29:42
And now the unnecessary line which we
29:42
And now the unnecessary line which we are seeing let's
29:44
are seeing let's
29:44
are seeing let's delete it.
29:46
delete it.
29:46
delete it. Now here we have shown the R3 but this
29:50
Now here we have shown the R3 but this
29:50
Now here we have shown the R3 but this R3 at the four location. So we will go
29:53
R3 at the four location. So we will go
29:53
R3 at the four location. So we will go here and give it a 4x
29:58
here and give it a 4x
29:58
here and give it a 4x and let's off the frame.
30:04
And
30:06
And
30:06
And now
30:09
now
30:09
now we have shown all the necessary
30:11
we have shown all the necessary
30:11
we have shown all the necessary dimension and the dimension which we
30:14
dimension and the dimension which we
30:14
dimension and the dimension which we have shown at uh multiple locations.
30:19
have shown at uh multiple locations.
30:19
have shown at uh multiple locations. We can make those dimension as a
30:21
We can make those dimension as a
30:22
We can make those dimension as a reference. For example 95 dimension I
30:25
reference. For example 95 dimension I
30:25
reference. For example 95 dimension I have shown in a front view as well in
30:27
have shown in a front view as well in
30:27
have shown in a front view as well in side view as well. So like inside view I
30:30
side view as well. So like inside view I
30:30
side view as well. So like inside view I can make this dimension as a reference
30:32
can make this dimension as a reference
30:32
can make this dimension as a reference by adding the bracket
30:37
which means that this is extra
30:39
which means that this is extra
30:39
which means that this is extra dimension.
30:40
dimension.
30:40
dimension. So if you are showing the dimension at a
30:43
So if you are showing the dimension at a
30:43
So if you are showing the dimension at a multiple locations so make it as a
30:46
multiple locations so make it as a
30:46
multiple locations so make it as a reference. For example in a side view I
30:49
reference. For example in a side view I
30:49
reference. For example in a side view I have shown the width of 80 mm. So in a
30:53
have shown the width of 80 mm. So in a
30:53
have shown the width of 80 mm. So in a section view I will make it a reference
30:56
section view I will make it a reference
30:56
section view I will make it a reference dimension by adding the bracket.
31:00
dimension by adding the bracket.
31:00
dimension by adding the bracket. So here you can see that uh we have
31:02
So here you can see that uh we have
31:02
So here you can see that uh we have given all necessary dimensions and now
31:06
given all necessary dimensions and now
31:06
given all necessary dimensions and now here we will insert the isometric.
31:10
here we will insert the isometric.
31:10
here we will insert the isometric. So we will uh go to the model
31:16
So we will uh go to the model
31:16
So we will uh go to the model model tab and first thing we will do is
31:19
model tab and first thing we will do is
31:19
model tab and first thing we will do is to fit our model
31:23
to fit our model
31:23
to fit our model and set to the isometric condition. And
31:25
and set to the isometric condition. And
31:26
and set to the isometric condition. And now here you will see the
31:28
now here you will see the
31:28
now here you will see the camera icon. Click on the active view
31:31
camera icon. Click on the active view
31:31
camera icon. Click on the active view and check here propage and save. Okay.
31:36
and check here propage and save. Okay.
31:36
and check here propage and save. Okay. Now go to the your drawing sheet. So you
31:39
Now go to the your drawing sheet. So you
31:39
Now go to the your drawing sheet. So you will see that isometric model is got
31:41
will see that isometric model is got
31:41
will see that isometric model is got inserted.
31:42
inserted.
31:42
inserted. And to move this isometric view which we
31:46
And to move this isometric view which we
31:46
And to move this isometric view which we have inserted we have on the frame and
31:49
have inserted we have on the frame and
31:49
have inserted we have on the frame and move this active view
31:52
move this active view
31:52
move this active view at the corner side.
31:55
at the corner side.
31:55
at the corner side. And now here
31:59
And now here
31:59
And now here we will move this section view.
32:07
and let's crop it because the border
32:10
and let's crop it because the border
32:10
and let's crop it because the border area is much more than we require. So we
32:13
area is much more than we require. So we
32:13
area is much more than we require. So we will go here and here is a height and
32:16
will go here and here is a height and
32:16
will go here and here is a height and width options. So let's make it uh 90
32:21
width options. So let's make it uh 90
32:21
width options. So let's make it uh 90 and let's make a height is of uh 100.
32:26
and let's make a height is of uh 100.
32:26
and let's make a height is of uh 100. Let's see how it is works.
32:30
Let's see how it is works.
32:30
Let's see how it is works. Instead of that uh let's make it 80.
32:39
So it is a cropping. So let's make it a
32:41
So it is a cropping. So let's make it a
32:41
So it is a cropping. So let's make it a 85.
32:43
85.
32:43
85. Let's make a 90.
32:46
Let's make a 90.
32:46
Let's make a 90. Let's make uh 95. Yes.
32:50
Let's make uh 95. Yes.
32:50
Let's make uh 95. Yes. And now let's off the frame.
32:53
And now let's off the frame.
32:53
And now let's off the frame. So you can see that uh we have a
32:56
So you can see that uh we have a
32:56
So you can see that uh we have a perfectly inserted
32:58
perfectly inserted
32:58
perfectly inserted isometric view. And for the better
33:02
isometric view. And for the better
33:02
isometric view. And for the better clarity
33:04
clarity
33:04
clarity let's uh on the frame. So we have shown
33:06
let's uh on the frame. So we have shown
33:06
let's uh on the frame. So we have shown this 63 diameter. So let's delete it.
33:09
this 63 diameter. So let's delete it.
33:09
this 63 diameter. So let's delete it. Let's also delete this reference line.
33:12
Let's also delete this reference line.
33:12
Let's also delete this reference line. And we will
33:16
And we will
33:16
And we will move our section view to the down side
33:20
move our section view to the down side
33:20
move our section view to the down side here.
33:21
here.
33:22
here. And let's also move this 42 diameter to
33:25
And let's also move this 42 diameter to
33:25
And let's also move this 42 diameter to the here
33:28
the here
33:28
the here and 32 here.
33:32
the bottom side.
33:37
Let's play place it here. And now off
33:40
Let's play place it here. And now off
33:40
Let's play place it here. And now off the frame.
33:44
And again on the frame.
33:53
And here
33:56
And here
33:56
And here let's make it scale to the 1.2.
33:59
let's make it scale to the 1.2.
33:59
let's make it scale to the 1.2. And uh let's just increase it to the 105
34:07
11 1 0
34:11
11 1 0
34:11
11 1 0 and let's make it a 95
34:15
and let's make it a 95
34:15
and let's make it a 95 or let's make it 100
34:22
and let's move it here. And let's make
34:27
and let's move it here. And let's make
34:27
and let's move it here. And let's make it 112.
34:29
it 112.
34:29
it 112. So let's check that it is not cutting
34:31
So let's check that it is not cutting
34:31
So let's check that it is not cutting the my model
34:34
the my model
34:34
the my model and let's off the frame
34:40
and here let's make this section view
34:46
and here let's make this section view
34:46
and here let's make this section view little bit downside
34:48
little bit downside
34:48
little bit downside here
34:50
here
34:50
here or let's move this 30
34:55
or let's move this 30
34:55
or let's move this 30 32 dimension
34:58
And let's move it here.
35:03
And let's move it here.
35:03
And let's move it here. Let's
35:05
Let's
35:05
Let's place it inside both this dimension.
35:09
place it inside both this dimension.
35:10
place it inside both this dimension. And now off the frame.
35:15
So we have a clearly
35:19
So we have a clearly
35:19
So we have a clearly given all the dimensions.
35:25
Now we will off the frame. So you can
35:29
Now we will off the frame. So you can
35:29
Now we will off the frame. So you can see that we have uh successfully created
35:33
see that we have uh successfully created
35:33
see that we have uh successfully created this uh drawing and we have added more
35:36
this uh drawing and we have added more
35:36
this uh drawing and we have added more details than shown in a reference
35:38
details than shown in a reference
35:38
details than shown in a reference drawing. So that is depend upon your
35:41
drawing. So that is depend upon your
35:41
drawing. So that is depend upon your skill how you read and uh give the
35:45
skill how you read and uh give the
35:45
skill how you read and uh give the dimensions.
35:48
Now we will uh insert the title block
35:52
Now we will uh insert the title block
35:52
Now we will uh insert the title block field here. So on the frame so we will
35:55
field here. So on the frame so we will
35:55
field here. So on the frame so we will go one by one. So here we have used the
35:58
go one by one. So here we have used the
35:58
go one by one. So here we have used the odd scale. So we will go to the scale
36:01
odd scale. So we will go to the scale
36:01
odd scale. So we will go to the scale and type NA. NA means scale is not
36:04
and type NA. NA means scale is not
36:04
and type NA. NA means scale is not applicable here. And here you can
36:08
applicable here. And here you can
36:08
applicable here. And here you can specify the material of this part how it
36:10
specify the material of this part how it
36:10
specify the material of this part how it is going to be manufactured. And here
36:13
is going to be manufactured. And here
36:13
is going to be manufactured. And here you can specify the general tolerance
36:16
you can specify the general tolerance
36:16
you can specify the general tolerance standard. And uh here is my title is too
36:20
standard. And uh here is my title is too
36:20
standard. And uh here is my title is too long. So I will just make it a technical
36:24
long. So I will just make it a technical
36:24
long. So I will just make it a technical drawing in a free cat and say okay. And
36:29
drawing in a free cat and say okay. And
36:29
drawing in a free cat and say okay. And here it is a created by me. So I will
36:32
here it is a created by me. So I will
36:32
here it is a created by me. So I will insert my name Patel
36:35
insert my name Patel
36:35
insert my name Patel and I will copy it
36:38
and I will copy it
36:38
and I will copy it and in a pro by I will insert my name
36:43
and in a pro by I will insert my name
36:44
and in a pro by I will insert my name and say okay.
36:46
and say okay.
36:46
and say okay. Now drawing number you can specify
36:48
Now drawing number you can specify
36:48
Now drawing number you can specify drawing number. And here is a document
36:50
drawing number. And here is a document
36:50
drawing number. And here is a document type. It is by default it is a assembly
36:53
type. It is by default it is a assembly
36:53
type. It is by default it is a assembly drawing but it is a part drawing. So I
36:57
drawing but it is a part drawing. So I
36:57
drawing but it is a part drawing. So I will uh make it a part drawing. Say
37:01
will uh make it a part drawing. Say
37:01
will uh make it a part drawing. Say okay.
37:02
okay.
37:02
okay. And document status is in preparation.
37:06
And document status is in preparation.
37:06
And document status is in preparation. It is not approved at. So you you can
37:09
It is not approved at. So you you can
37:09
It is not approved at. So you you can change the status here. Now here is
37:12
change the status here. Now here is
37:12
change the status here. Now here is owner options. So here I will insert my
37:14
owner options. So here I will insert my
37:14
owner options. So here I will insert my logo. So for this I will go to the tech
37:17
logo. So for this I will go to the tech
37:17
logo. So for this I will go to the tech draw
37:19
draw
37:19
draw views and here you will see the option
37:21
views and here you will see the option
37:21
views and here you will see the option of insert bit map image. Click on it and
37:24
of insert bit map image. Click on it and
37:24
of insert bit map image. Click on it and now I will uh go to the
37:29
now I will uh go to the
37:29
now I will uh go to the my drawings
37:32
my drawings
37:32
my drawings any existing where I have a
37:36
any existing where I have a
37:36
any existing where I have a logo. So I will insert my logo here. And
37:40
logo. So I will insert my logo here. And
37:40
logo. So I will insert my logo here. And now here you can see that uh logo size
37:44
now here you can see that uh logo size
37:44
now here you can see that uh logo size is uh bigger than the area I have on my
37:47
is uh bigger than the area I have on my
37:47
is uh bigger than the area I have on my drawing template. So I will simply go
37:49
drawing template. So I will simply go
37:50
drawing template. So I will simply go here and reduce the scale to the half
37:54
here and reduce the scale to the half
37:54
here and reduce the scale to the half and move it whether I can fit or not. So
37:58
and move it whether I can fit or not. So
37:58
and move it whether I can fit or not. So instead of a 0.5 I will give it 0 4
38:02
instead of a 0.5 I will give it 0 4
38:02
instead of a 0.5 I will give it 0 4 and let's
38:04
and let's
38:04
and let's move it. And now I will uh off the
38:07
move it. And now I will uh off the
38:07
move it. And now I will uh off the frame.
38:10
So this is how we have created this uh
38:14
So this is how we have created this uh
38:14
So this is how we have created this uh beautiful drawing with respect to the
38:17
beautiful drawing with respect to the
38:17
beautiful drawing with respect to the reference drawing in free and free tech
38:21
reference drawing in free and free tech
38:21
reference drawing in free and free tech draw workbench is a very capable to
38:24
draw workbench is a very capable to
38:24
draw workbench is a very capable to create a technical drawings like uh you
38:27
create a technical drawings like uh you
38:27
create a technical drawings like uh you can create in other softwares like solid
38:29
can create in other softwares like solid
38:30
can create in other softwares like solid works or autodis inventor. But there are
38:33
works or autodis inventor. But there are
38:33
works or autodis inventor. But there are the some challenges in a tech draw
38:35
the some challenges in a tech draw
38:35
the some challenges in a tech draw workbench like uh inserting a center
38:38
workbench like uh inserting a center
38:38
workbench like uh inserting a center mark and getting two points and directly
38:41
mark and getting two points and directly
38:41
mark and getting two points and directly stretching it. But I'm very positive
38:43
stretching it. But I'm very positive
38:43
stretching it. But I'm very positive about that in a upcoming versions
38:47
about that in a upcoming versions
38:47
about that in a upcoming versions uh free tech draw workbench will be
38:50
uh free tech draw workbench will be
38:50
uh free tech draw workbench will be improve a lot. So this is all about this
38:54
improve a lot. So this is all about this
38:54
improve a lot. So this is all about this tutorial how to create uh technical
38:56
tutorial how to create uh technical
38:56
tutorial how to create uh technical drawings in a free.
39:01
drawings in a free.
39:01
drawings in a free. Thank you for watching and thank you for
39:04
Thank you for watching and thank you for
39:04
Thank you for watching and thank you for your valuable time.
39:08
your valuable time.
39:08
your valuable time. [Music]
39:25
[Music]
39:25
[Music] Heat. Heat.
39:37
[Music]