Up next in 10
FreeCAD Part Modeling Tutorial | FreeCAD Tutorial | 3D Modeling | Learn FreeCAD | Mechnexus |
Sep 19, 2025
#freecad #freecadtutorial #learnFreeAD In this video I have explained How to Model Part in FreeCAD with the help of part design Workbench. ▶️ Get my Complete FreeCAD Course : From Zero to Expert ! https://ko-fi.com/s/1ab4385434 ▶️ Join my channel membership and keep supporting my work: https://www.youtube.com/channel/UCcn6z2whMaFu-_LDsEXCfVA/join ▶️ Visit my website for more info on FreeCAD-: https://mechnexus.com/ ▶️ Download Source File of Tutorial-: https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ ▶️ Buy Me a Coffee I am very grateful that you watch my videos and I am constantly trying to improve the quality of the videos on this channel. If you'd like to help me do this, please consider supporting me so that I can to continue to produce content for your enjoyment. 👉 Help support this channel by buying me a coffee: https://ko-fi.com/mechnexus
View Video Transcript
0:01
Hello friends, welcome to free tutorial
0:03
Hello friends, welcome to free tutorial
0:03
Hello friends, welcome to free tutorial and in this tutorial we will model this
0:06
and in this tutorial we will model this
0:06
and in this tutorial we will model this uh shaft clamp in a frecat. As uh you
0:10
uh shaft clamp in a frecat. As uh you
0:10
uh shaft clamp in a frecat. As uh you can see that uh I have already modeled
0:13
can see that uh I have already modeled
0:13
can see that uh I have already modeled it and uh I will show you from the
0:16
it and uh I will show you from the
0:16
it and uh I will show you from the scratch how you can model this type of a
0:19
scratch how you can model this type of a
0:19
scratch how you can model this type of a part. For this tutorial I'm using the
0:22
part. For this tutorial I'm using the
0:22
part. For this tutorial I'm using the fread version 1.0. So you must have at
0:26
fread version 1.0. So you must have at
0:26
fread version 1.0. So you must have at least 1.0 zero or higher version than
0:29
least 1.0 zero or higher version than
0:29
least 1.0 zero or higher version than this.
0:32
this.
0:32
this. I will uh close this file and create a
0:35
I will uh close this file and create a
0:35
I will uh close this file and create a new file.
0:39
You can also visit my website
0:41
You can also visit my website
0:41
You can also visit my website macexus.com
0:42
macexus.com
0:42
macexus.com where I write articles and tutorials on
0:46
where I write articles and tutorials on
0:46
where I write articles and tutorials on free and you can also access my 3D part
0:51
free and you can also access my 3D part
0:51
free and you can also access my 3D part library of a free CAD. You can download
0:55
library of a free CAD. You can download
0:55
library of a free CAD. You can download the part from here and you can use in
0:58
the part from here and you can use in
0:58
the part from here and you can use in your projects with modifications.
1:02
your projects with modifications.
1:02
your projects with modifications. You can also access my 2D drawing
1:05
You can also access my 2D drawing
1:05
You can also access my 2D drawing library where you can u download this 2D
1:09
library where you can u download this 2D
1:09
library where you can u download this 2D drawings and uh you can create 3D models
1:14
drawings and uh you can create 3D models
1:14
drawings and uh you can create 3D models with respect to these drawings.
1:18
with respect to these drawings.
1:18
with respect to these drawings. You can also support me on coffi.com.
1:22
You can also support me on coffi.com.
1:22
You can also support me on coffi.com. You can buy me a cup of coffee. Your
1:26
You can buy me a cup of coffee. Your
1:26
You can buy me a cup of coffee. Your small support will uh help this channels
1:28
small support will uh help this channels
1:28
small support will uh help this channels to grow and it will motivate me to
1:31
to grow and it will motivate me to
1:32
to grow and it will motivate me to create more awesome content on uh free
1:35
create more awesome content on uh free
1:35
create more awesome content on uh free CAD. You can find my Kofi donation page
1:38
CAD. You can find my Kofi donation page
1:38
CAD. You can find my Kofi donation page link in a video description as well as
1:42
link in a video description as well as
1:42
link in a video description as well as you can also see my Kofi page URL on
1:45
you can also see my Kofi page URL on
1:45
you can also see my Kofi page URL on this header.
1:48
this header.
1:48
this header. So let's come back to our tutorial.
1:53
So here I have created a new file and I
1:56
So here I have created a new file and I
1:56
So here I have created a new file and I will insert a body and I will on the
1:59
will insert a body and I will on the
1:59
will insert a body and I will on the origin plane. And now here if we see the
2:03
origin plane. And now here if we see the
2:04
origin plane. And now here if we see the isometric model of our part. So we will
2:08
isometric model of our part. So we will
2:08
isometric model of our part. So we will first create this L-shaped profile on a
2:12
first create this L-shaped profile on a
2:12
first create this L-shaped profile on a right plane.
2:14
right plane.
2:14
right plane. I will select the right plane and click
2:16
I will select the right plane and click
2:16
I will select the right plane and click on the sketch
2:18
on the sketch
2:18
on the sketch and go to the model tab and uh
2:23
and go to the model tab and uh
2:23
and go to the model tab and uh hide the origin plane. And now here I
2:26
hide the origin plane. And now here I
2:26
hide the origin plane. And now here I will select a rectangle tool and uh
2:30
will select a rectangle tool and uh
2:30
will select a rectangle tool and uh create a rectangle. Now select the line
2:33
create a rectangle. Now select the line
2:33
create a rectangle. Now select the line and uh
2:37
create horizontal and vertical line. And
2:39
create horizontal and vertical line. And
2:39
create horizontal and vertical line. And then I will use the trim tool to
2:44
then I will use the trim tool to
2:44
then I will use the trim tool to trim it. And now we will uh constrain
2:47
trim it. And now we will uh constrain
2:48
trim it. And now we will uh constrain it.
2:50
it.
2:50
it. So now we will refer this view to give
2:54
So now we will refer this view to give
2:54
So now we will refer this view to give our dimensions.
2:55
our dimensions.
2:56
our dimensions. So first thing we will create the fillet
2:59
So first thing we will create the fillet
2:59
So first thing we will create the fillet of R4 and R12. So we will uh simply use
3:04
of R4 and R12. So we will uh simply use
3:04
of R4 and R12. So we will uh simply use the fillet tool. Use the fillet
3:08
the fillet tool. Use the fillet
3:08
the fillet tool. Use the fillet this and this. And now let's uh give the
3:12
this and this. And now let's uh give the
3:12
this and this. And now let's uh give the dimensions. So this is the R12. Select a
3:15
dimensions. So this is the R12. Select a
3:15
dimensions. So this is the R12. Select a smart dimension and uh
3:21
provide it uh R12. And now select this
3:26
provide it uh R12. And now select this
3:26
provide it uh R12. And now select this and uh this one is a R4.
3:30
and uh this one is a R4.
3:30
and uh this one is a R4. And now let's uh
3:33
And now let's uh
3:33
And now let's uh select this and this and made it equal
3:37
select this and this and made it equal
3:37
select this and this and made it equal and select the smart dimension.
3:40
and select the smart dimension.
3:40
and select the smart dimension. And uh this is of 8 mm thickness.
3:45
And uh this is of 8 mm thickness.
3:45
And uh this is of 8 mm thickness. And now
3:48
let's give the dimension. So if you see
3:51
let's give the dimension. So if you see
3:51
let's give the dimension. So if you see this is the 62 is uh given here. But for
3:55
this is the 62 is uh given here. But for
3:55
this is the 62 is uh given here. But for this we will create the construction
3:59
this we will create the construction
3:59
this we will create the construction line.
4:04
Select a line tool. Create
4:08
Select a line tool. Create
4:08
Select a line tool. Create an approximate line.
4:12
an approximate line.
4:12
an approximate line. And now press the control key and click
4:16
And now press the control key and click
4:16
And now press the control key and click on the construction.
4:18
on the construction.
4:18
on the construction. And now here we will uh
4:23
And now here we will uh
4:23
And now here we will uh create one more line
4:28
horizontal one. and make it
4:30
horizontal one. and make it
4:30
horizontal one. and make it construction. And now here I will select
4:33
construction. And now here I will select
4:33
construction. And now here I will select a smart dimensions tool and select this
4:37
a smart dimensions tool and select this
4:37
a smart dimensions tool and select this point and this point and u provide it as
4:40
point and this point and u provide it as
4:40
point and this point and u provide it as 62. And now
4:43
62. And now
4:44
62. And now here is angle 15 is given. So I will
4:46
here is angle 15 is given. So I will
4:46
here is angle 15 is given. So I will select this line and this line.
4:50
select this line and this line.
4:50
select this line and this line. Let's move this dimension and select the
4:53
Let's move this dimension and select the
4:53
Let's move this dimension and select the smart dimension. Select this and this
4:57
smart dimension. Select this and this
4:57
smart dimension. Select this and this and provide the angle of 15. And now
5:03
if we see this one.
5:07
if we see this one.
5:07
if we see this one. So here we can see that uh from this age
5:12
So here we can see that uh from this age
5:12
So here we can see that uh from this age here is a 20 and it is 8. So this is
5:15
here is a 20 and it is 8. So this is
5:15
here is a 20 and it is 8. So this is from the mid. So 20 + 4 is of 24. So we
5:20
from the mid. So 20 + 4 is of 24. So we
5:20
from the mid. So 20 + 4 is of 24. So we will select this point and this one and
5:25
will select this point and this one and
5:25
will select this point and this one and provide it a 24.
5:28
provide it a 24.
5:28
provide it a 24. And now
5:31
And now
5:31
And now we will uh create one more line which
5:34
we will uh create one more line which
5:34
we will uh create one more line which will be the perpendicular.
5:37
will be the perpendicular.
5:37
will be the perpendicular. So select the line tool
5:40
So select the line tool
5:40
So select the line tool and create a line and uh make it a
5:43
and create a line and uh make it a
5:43
and create a line and uh make it a construction.
5:45
construction.
5:45
construction. Now select this and this and add a
5:48
Now select this and this and add a
5:48
Now select this and this and add a perpendicular T. And now here there is a
5:52
perpendicular T. And now here there is a
5:52
perpendicular T. And now here there is a no need of this vertical line. Delete
5:54
no need of this vertical line. Delete
5:54
no need of this vertical line. Delete it. And now
5:57
it. And now
5:57
it. And now select the trim tool to trim this and
6:00
select the trim tool to trim this and
6:00
select the trim tool to trim this and this. And now
6:04
this. And now
6:04
this. And now select line tool from
6:08
select line tool from
6:08
select line tool from join these two points.
6:10
join these two points.
6:10
join these two points. And now
6:13
And now
6:13
And now move this dimension. Now select the
6:15
move this dimension. Now select the
6:15
move this dimension. Now select the smart dimension. Select this and this.
6:19
smart dimension. Select this and this.
6:19
smart dimension. Select this and this. And provide the 50.
6:24
And provide the 50.
6:24
And provide the 50. And now select the smart dimension.
6:28
And now select the smart dimension.
6:28
And now select the smart dimension. Provide it 8 mm.
6:32
Provide it 8 mm.
6:32
Provide it 8 mm. And uh select the smart dimension.
6:36
And uh select the smart dimension.
6:36
And uh select the smart dimension. Select this and this. and provide the 8
6:40
Select this and this. and provide the 8
6:40
Select this and this. and provide the 8 mm.
6:43
mm.
6:43
mm. Now we will uh come out of the sketch.
6:48
Switch to the isometric view and switch
6:50
Switch to the isometric view and switch
6:50
Switch to the isometric view and switch to the right one. So our sketch is fully
6:54
to the right one. So our sketch is fully
6:54
to the right one. So our sketch is fully constrained.
6:57
constrained.
6:57
constrained. Let's uh move it.
7:01
So here it is showing the four degree of
7:04
So here it is showing the four degree of
7:04
So here it is showing the four degree of freedom. So four degree of freedom
7:06
freedom. So four degree of freedom
7:06
freedom. So four degree of freedom basically is for this construction
7:08
basically is for this construction
7:08
basically is for this construction geometry. So if you click on it, so all
7:12
geometry. So if you click on it, so all
7:12
geometry. So if you click on it, so all the degree of freedom is highlighting to
7:15
the degree of freedom is highlighting to
7:15
the degree of freedom is highlighting to this construction geometry. So we can
7:17
this construction geometry. So we can
7:17
this construction geometry. So we can ignore it. Now select the sketch, click
7:21
ignore it. Now select the sketch, click
7:21
ignore it. Now select the sketch, click on the pad
7:23
on the pad
7:23
on the pad and uh this is the pad of uh 34 mm and
7:27
and uh this is the pad of uh 34 mm and
7:27
and uh this is the pad of uh 34 mm and make it symmetric to the plane
7:30
make it symmetric to the plane
7:30
make it symmetric to the plane and say okay.
7:33
and say okay.
7:33
and say okay. Now our uh first feature is uh created.
7:39
Now our uh first feature is uh created.
7:39
Now our uh first feature is uh created. So let's save our part
7:43
and I will give it uh division R1. Save
7:47
and I will give it uh division R1. Save
7:47
and I will give it uh division R1. Save it.
7:50
it.
7:50
it. Now we will uh create our next feature.
7:53
Now we will uh create our next feature.
7:53
Now we will uh create our next feature. Our next feature if we refer the
7:56
Our next feature if we refer the
7:56
Our next feature if we refer the isometric view. So we will create this
7:58
isometric view. So we will create this
7:58
isometric view. So we will create this profile
8:00
profile
8:00
profile and whose the normal view is given here.
8:05
and whose the normal view is given here.
8:05
and whose the normal view is given here. So for this we will select this face and
8:08
So for this we will select this face and
8:08
So for this we will select this face and click on the sketch.
8:10
click on the sketch.
8:10
click on the sketch. And now I will rotate it
8:14
And now I will rotate it
8:14
And now I will rotate it and uh click on the project geometry and
8:18
and uh click on the project geometry and
8:18
and uh click on the project geometry and project this edge.
8:20
project this edge.
8:20
project this edge. And now here if you see so we will
8:24
And now here if you see so we will
8:24
And now here if you see so we will create four arc at four places.
8:27
create four arc at four places.
8:28
create four arc at four places. So select here uh threepoint arc
8:33
So select here uh threepoint arc
8:33
So select here uh threepoint arc one arc here
8:35
one arc here
8:35
one arc here one arc here
8:38
one arc here
8:38
one arc here one here and
8:42
one here and
8:42
one here and one here.
8:44
one here.
8:44
one here. And now
8:46
And now
8:46
And now let's first uh
8:49
let's first uh
8:49
let's first uh add the relation. Make it uh coincident
8:53
add the relation. Make it uh coincident
8:53
add the relation. Make it uh coincident with the horizontal axis. Make it
8:55
with the horizontal axis. Make it
8:55
with the horizontal axis. Make it coincident with the horizontal axis.
8:58
coincident with the horizontal axis.
8:58
coincident with the horizontal axis. And make coincidence with the vertical
9:01
And make coincidence with the vertical
9:01
And make coincidence with the vertical axis.
9:02
axis.
9:02
axis. This to this form the vertical axis. And
9:06
This to this form the vertical axis. And
9:06
This to this form the vertical axis. And now
9:08
now
9:08
now let's give the radius dimension.
9:12
let's give the radius dimension.
9:12
let's give the radius dimension. So this is of a
9:16
diameter 20 is here. So we will give the
9:19
diameter 20 is here. So we will give the
9:19
diameter 20 is here. So we will give the radius 10. And here I will press the
9:22
radius 10. And here I will press the
9:22
radius 10. And here I will press the control key. Select both the radius and
9:25
control key. Select both the radius and
9:25
control key. Select both the radius and made it equal. Similarly select these
9:28
made it equal. Similarly select these
9:28
made it equal. Similarly select these two made it equal. And here is of
9:33
two made it equal. And here is of
9:33
two made it equal. And here is of radius
9:35
radius
9:36
radius 20.
9:39
Select it and give it a 20.
9:44
Select it and give it a 20.
9:44
Select it and give it a 20. And now let's add a symmetricity
9:47
And now let's add a symmetricity
9:47
And now let's add a symmetricity constraint. So click on symmetricity.
9:49
constraint. So click on symmetricity.
9:49
constraint. So click on symmetricity. Select this point,
9:51
Select this point,
9:51
Select this point, this point and this axis.
9:55
this point and this axis.
9:55
this point and this axis. Similarly this and this and this axis.
9:59
Similarly this and this and this axis.
9:59
Similarly this and this and this axis. And now let's give the dimensions. So
10:02
And now let's give the dimensions. So
10:02
And now let's give the dimensions. So here is of 50 mm is given. So I will
10:06
here is of 50 mm is given. So I will
10:06
here is of 50 mm is given. So I will specific select a horizontal dimension.
10:09
specific select a horizontal dimension.
10:09
specific select a horizontal dimension. Select these two points
10:12
Select these two points
10:12
Select these two points or select a smart dimension. Select this
10:15
or select a smart dimension. Select this
10:15
or select a smart dimension. Select this and this.
10:29
Give it a 50.
10:32
Give it a 50.
10:32
Give it a 50. And
10:34
And
10:34
And this radius will be coincidence on the
10:37
this radius will be coincidence on the
10:37
this radius will be coincidence on the axis.
10:39
axis.
10:39
axis. Add a coincidence relation.
10:42
Add a coincidence relation.
10:42
Add a coincidence relation. Now
10:44
Now
10:44
Now let's uh
10:49
see the center. So
10:52
see the center. So
10:52
see the center. So here select this and this and add a co
10:56
here select this and this and add a co
10:56
here select this and this and add a co relation. Now move it
10:59
relation. Now move it
10:59
relation. Now move it both on the axis. And now we will uh
11:03
both on the axis. And now we will uh
11:03
both on the axis. And now we will uh select a line tool.
11:07
select a line tool.
11:07
select a line tool. Join these two arc and at the same times
11:10
Join these two arc and at the same times
11:10
Join these two arc and at the same times add a tangency.
11:12
add a tangency.
11:12
add a tangency. Select this and this and add a tency.
11:16
Select this and this and add a tency.
11:16
Select this and this and add a tency. Select line tool.
11:21
Add a tangency.
11:24
Add a tangency.
11:24
Add a tangency. Add a tangency.
11:28
Similarly, line tool
11:32
add a tangent. See, select this and this
11:35
add a tangent. See, select this and this
11:35
add a tangent. See, select this and this and add a tangent.
11:37
and add a tangent.
11:37
and add a tangent. Select this and this and add a tangent.
11:41
Select this and this and add a tangent.
11:41
Select this and this and add a tangent. Select
11:43
Select
11:43
Select line tool. Join it. And add a tangent.
11:49
line tool. Join it. And add a tangent.
11:49
line tool. Join it. And add a tangent. And add a tangent.
11:58
Now it seems to be perfect.
12:01
Now it seems to be perfect.
12:01
Now it seems to be perfect. Now let's see the what is the 10 degree
12:03
Now let's see the what is the 10 degree
12:03
Now let's see the what is the 10 degree of freedom. So this radius
12:08
of freedom. So this radius
12:08
of freedom. So this radius provide it 20
12:11
provide it 20
12:11
provide it 20 provide it of uh 10.
12:15
provide it of uh 10.
12:15
provide it of uh 10. And now
12:19
if we select this radius.
12:23
if we select this radius.
12:23
if we select this radius. So
12:25
So
12:25
So constraint is got removed. So let's move
12:28
constraint is got removed. So let's move
12:28
constraint is got removed. So let's move it
12:30
it
12:30
it and
12:33
and
12:33
and let's add the
12:36
let's add the
12:36
let's add the coincidence constraint.
12:38
coincidence constraint.
12:38
coincidence constraint. Add a coincidence.
12:42
And now let's see the center of this
12:44
And now let's see the center of this
12:44
And now let's see the center of this radius where it is. So
12:48
radius where it is. So
12:48
radius where it is. So it is okay. And now I will make this and
12:51
it is okay. And now I will make this and
12:51
it is okay. And now I will make this and this
12:53
this
12:53
this equal.
12:56
And now
12:59
And now
12:59
And now instead of this axis it should be the
13:02
instead of this axis it should be the
13:02
instead of this axis it should be the horizontal relation with the
13:07
select the point
13:09
select the point
13:09
select the point and add a horizontal relation. Similarly
13:12
and add a horizontal relation. Similarly
13:12
and add a horizontal relation. Similarly select this point and this point add
13:15
select this point and this point add
13:15
select this point and this point add horizontal relation. So here it took the
13:17
horizontal relation. So here it took the
13:17
horizontal relation. So here it took the vertical.
13:28
Now select uh this and this and make it
13:32
Now select uh this and this and make it
13:32
Now select uh this and this and make it equal.
13:34
equal.
13:34
equal. And now let's see what is on constraint.
13:38
And now let's see what is on constraint.
13:38
And now let's see what is on constraint. So here let's make it uh symmetric.
13:44
Select a smart dimension. Select this
13:47
Select a smart dimension. Select this
13:47
Select a smart dimension. Select this and
13:49
and
13:49
and this provide the 15.
13:52
this provide the 15.
13:52
this provide the 15. So our sketch is fully constrained. We
13:54
So our sketch is fully constrained. We
13:54
So our sketch is fully constrained. We will come out of it and
13:57
will come out of it and
13:57
will come out of it and this is a pad of a 10 mm
14:01
this is a pad of a 10 mm
14:01
this is a pad of a 10 mm and say okay and let's save our part.
14:05
and say okay and let's save our part.
14:05
and say okay and let's save our part. Now let's move to the next feature. Next
14:08
Now let's move to the next feature. Next
14:08
Now let's move to the next feature. Next feature is to
14:10
feature is to
14:10
feature is to create a mid plane.
14:14
create a mid plane.
14:14
create a mid plane. So select the face, click on the data
14:16
So select the face, click on the data
14:16
So select the face, click on the data plane and here in a Z directions provide
14:20
plane and here in a Z directions provide
14:20
plane and here in a Z directions provide minus4
14:22
minus4
14:22
minus4 and switch to the right view. Now the
14:24
and switch to the right view. Now the
14:24
and switch to the right view. Now the mid plane is inserted.
14:27
mid plane is inserted.
14:27
mid plane is inserted. Now I will press zero and rebuild our
14:31
Now I will press zero and rebuild our
14:31
Now I will press zero and rebuild our data plane and select the data plane and
14:34
data plane and select the data plane and
14:34
data plane and select the data plane and uh click on the sketch. Now rotate our
14:37
uh click on the sketch. Now rotate our
14:37
uh click on the sketch. Now rotate our model
14:39
model
14:39
model and here we will uh create
14:43
and here we will uh create
14:43
and here we will uh create the circle of diameter 60. Let's switch
14:47
the circle of diameter 60. Let's switch
14:47
the circle of diameter 60. Let's switch to the wireframe
14:49
to the wireframe
14:49
to the wireframe and uh
14:53
select a smart dimension.
14:56
select a smart dimension.
14:56
select a smart dimension. Provide it 60.
14:59
Provide it 60.
14:59
Provide it 60. Select this and this and add a
15:02
Select this and this and add a
15:02
Select this and this and add a coincidence.
15:04
coincidence.
15:04
coincidence. And now
15:06
And now
15:06
And now here we will create this 14 mm.
15:12
here we will create this 14 mm.
15:12
here we will create this 14 mm. So select this sketch and add the pad of
15:17
So select this sketch and add the pad of
15:17
So select this sketch and add the pad of 14 mm and make it symmetric to the plane
15:21
14 mm and make it symmetric to the plane
15:21
14 mm and make it symmetric to the plane and of the data plane.
15:24
and of the data plane.
15:24
and of the data plane. Now let's move to the next feature. Next
15:27
Now let's move to the next feature. Next
15:27
Now let's move to the next feature. Next feature again select the face and click
15:30
feature again select the face and click
15:30
feature again select the face and click on the sketch
15:33
on the sketch
15:33
on the sketch and uh click on the project geometry and
15:36
and uh click on the project geometry and
15:36
and uh click on the project geometry and project this diameter.
15:39
project this diameter.
15:39
project this diameter. Select the circle.
15:41
Select the circle.
15:41
Select the circle. Select uh smart dimension and this is of
15:45
Select uh smart dimension and this is of
15:45
Select uh smart dimension and this is of diameter 49.
15:47
diameter 49.
15:47
diameter 49. Click on close
15:49
Click on close
15:49
Click on close and add the pad of 7 mm.
15:55
Say okay.
15:57
Say okay.
15:57
Say okay. And now we will uh mirror this pad 003
16:03
And now we will uh mirror this pad 003
16:03
And now we will uh mirror this pad 003 with respect to the data plane. So
16:05
with respect to the data plane. So
16:05
with respect to the data plane. So select the pad, click on mirror,
16:10
select the pad, click on mirror,
16:10
select the pad, click on mirror, select reference and uh
16:14
select reference and uh
16:14
select reference and uh go to the model tab and select this data
16:16
go to the model tab and select this data
16:16
go to the model tab and select this data plane and come to the task pane. So you
16:20
plane and come to the task pane. So you
16:20
plane and come to the task pane. So you can see that data plane is added and say
16:23
can see that data plane is added and say
16:23
can see that data plane is added and say okay. Now hide this data plane and click
16:27
okay. Now hide this data plane and click
16:27
okay. Now hide this data plane and click on save. Now let's uh move to the next
16:31
on save. Now let's uh move to the next
16:31
on save. Now let's uh move to the next feature. So next feature is to remove
16:33
feature. So next feature is to remove
16:33
feature. So next feature is to remove material. If you see our isometric view,
16:36
material. If you see our isometric view,
16:36
material. If you see our isometric view, so we will simply create a rough
16:39
so we will simply create a rough
16:39
so we will simply create a rough rectangle and we will cut this to the
16:42
rectangle and we will cut this to the
16:42
rectangle and we will cut this to the half of the diameter. So select the face
16:46
half of the diameter. So select the face
16:46
half of the diameter. So select the face and click on the sketch and now rotate
16:49
and click on the sketch and now rotate
16:49
and click on the sketch and now rotate my model and uh click on the project
16:52
my model and uh click on the project
16:52
my model and uh click on the project geometry so that we get a center. Select
16:55
geometry so that we get a center. Select
16:55
geometry so that we get a center. Select a rectangle tool and uh click on the
16:59
a rectangle tool and uh click on the
16:59
a rectangle tool and uh click on the coincidence
17:01
coincidence
17:01
coincidence and now
17:04
click on the symmetricity
17:07
click on the symmetricity
17:07
click on the symmetricity even though constraint is not required
17:09
even though constraint is not required
17:09
even though constraint is not required but uh we will make it fully constrained
17:13
but uh we will make it fully constrained
17:13
but uh we will make it fully constrained and let's make a rough 100 mm and uh
17:19
and let's make a rough 100 mm and uh
17:19
and let's make a rough 100 mm and uh vertical 35.
17:21
vertical 35.
17:21
vertical 35. Click on close.
17:23
Click on close.
17:23
Click on close. Select the sketch. Click on the pocket.
17:27
Select the sketch. Click on the pocket.
17:27
Select the sketch. Click on the pocket. Select through all and say okay.
17:30
Select through all and say okay.
17:30
Select through all and say okay. Now
17:33
Now
17:33
Now we will uh add the material here. So
17:37
we will uh add the material here. So
17:37
we will uh add the material here. So select the face and click on the sketch
17:41
select the face and click on the sketch
17:41
select the face and click on the sketch and let's rotate our view. And now here
17:44
and let's rotate our view. And now here
17:44
and let's rotate our view. And now here I will project this edge. And here
17:49
I will project this edge. And here
17:49
I will project this edge. And here I will uh create a rough rectangle
17:54
I will uh create a rough rectangle
17:54
I will uh create a rough rectangle and I will delete this line.
17:58
and I will delete this line.
17:58
and I will delete this line. I will select a threepoint arc.
18:06
Select this and this and add a tangent.
18:08
Select this and this and add a tangent.
18:08
Select this and this and add a tangent. Select this and this and add a tangent.
18:12
Select this and this and add a tangent.
18:12
Select this and this and add a tangent. And now I will select a point tool to
18:16
And now I will select a point tool to
18:16
And now I will select a point tool to insert a midpoint here.
18:19
insert a midpoint here.
18:19
insert a midpoint here. And select this and this and add a
18:22
And select this and this and add a
18:22
And select this and this and add a respective relation. And now
18:28
we will uh constrain it. Select the axis
18:32
we will uh constrain it. Select the axis
18:32
we will uh constrain it. Select the axis and the center and provide it 36.
18:37
and the center and provide it 36.
18:37
and the center and provide it 36. And now
18:39
And now
18:39
And now select this and this and add a
18:41
select this and this and add a
18:41
select this and this and add a coincidence.
18:43
coincidence.
18:43
coincidence. Select a smart dimension provide it R9
18:48
Select a smart dimension provide it R9
18:48
Select a smart dimension provide it R9 and uh this one is of 15.
18:54
and uh this one is of 15.
18:54
and uh this one is of 15. So here
18:59
we will uh close it.
19:02
we will uh close it.
19:02
we will uh close it. And here if you see
19:05
And here if you see
19:05
And here if you see Here
19:09
is R9 is perfect.
19:12
is R9 is perfect.
19:12
is R9 is perfect. And now let's uh again cross shape our
19:15
And now let's uh again cross shape our
19:15
And now let's uh again cross shape our sketch.
19:20
So here it is not a symmetric. So we
19:23
So here it is not a symmetric. So we
19:23
So here it is not a symmetric. So we will delete this point
19:26
will delete this point
19:26
will delete this point and we will again
19:36
Place the point. It is not taking the
19:38
Place the point. It is not taking the
19:38
Place the point. It is not taking the mid position. So we will uh
19:43
mid position. So we will uh
19:43
mid position. So we will uh it is a 14. So just uh give it a
19:47
it is a 14. So just uh give it a
19:47
it is a 14. So just uh give it a reference dimension and
19:50
reference dimension and
19:50
reference dimension and give this point
19:53
give this point
19:53
give this point 7. So here basically we will delete this
19:58
7. So here basically we will delete this
19:58
7. So here basically we will delete this arc
20:00
arc
20:00
arc and we will move it
20:04
and we will move it
20:04
and we will move it and here
20:09
we will again create a threepoint arc.
20:12
we will again create a threepoint arc.
20:12
we will again create a threepoint arc. Select this
20:14
Select this
20:14
Select this and this and
20:17
and this and
20:17
and this and add tangent.
20:20
add tangent.
20:20
add tangent. Add a tangent. Now select this point and
20:23
Add a tangent. Now select this point and
20:23
Add a tangent. Now select this point and this point
20:27
and select uh radius and provide it R9.
20:34
and select uh radius and provide it R9.
20:34
and select uh radius and provide it R9. Now it's look okay
20:38
Now it's look okay
20:38
Now it's look okay and here select a smart dimension select
20:41
and here select a smart dimension select
20:41
and here select a smart dimension select axis and this
20:45
arc point and provide it 36.
20:50
arc point and provide it 36.
20:50
arc point and provide it 36. Click on close. Press zero from keyboard
20:53
Click on close. Press zero from keyboard
20:53
Click on close. Press zero from keyboard for isometric position. Select the
20:56
for isometric position. Select the
20:56
for isometric position. Select the sketch and click on the pad
21:00
sketch and click on the pad
21:00
sketch and click on the pad and set it reverse. Say okay.
21:05
and set it reverse. Say okay.
21:05
and set it reverse. Say okay. Now
21:07
Now
21:07
Now we will uh mirror on the other side. So
21:10
we will uh mirror on the other side. So
21:10
we will uh mirror on the other side. So select the pad. Click on mirror
21:13
select the pad. Click on mirror
21:13
select the pad. Click on mirror and here select reference and select
21:15
and here select reference and select
21:15
and here select reference and select this mid plane and say okay.
21:21
Let's uh save our part.
21:28
Now if we see our isometric model.
21:31
Now if we see our isometric model.
21:31
Now if we see our isometric model. So there is a
21:35
So there is a
21:35
So there is a pad on the back side whose detail we can
21:37
pad on the back side whose detail we can
21:37
pad on the back side whose detail we can see here.
21:39
see here.
21:39
see here. And this is on the mid plane. So I will
21:42
And this is on the mid plane. So I will
21:42
And this is on the mid plane. So I will on the origin plane and select the
21:45
on the origin plane and select the
21:45
on the origin plane and select the sketch. Click on the sketch icon.
21:49
sketch. Click on the sketch icon.
21:49
sketch. Click on the sketch icon. And here
21:51
And here
21:51
And here go to the model tab and hide the origin.
21:54
go to the model tab and hide the origin.
21:54
go to the model tab and hide the origin. And now here we will uh switch to the
21:57
And now here we will uh switch to the
21:57
And now here we will uh switch to the wireframe view first and then
22:01
wireframe view first and then
22:01
wireframe view first and then we will uh project the edges.
22:07
And now
22:10
select a line tool.
22:13
select a line tool.
22:13
select a line tool. Add a line.
22:16
Add a line.
22:16
Add a line. And now select a threepoint arc.
22:22
And
22:24
And
22:24
And then add one more arc.
22:29
And let's add a tangency relation here
22:34
And let's add a tangency relation here
22:34
And let's add a tangency relation here and here.
22:36
and here.
22:36
and here. And uh select a smart dimension.
22:41
And uh select a smart dimension.
22:41
And uh select a smart dimension. And this is of 24.
22:46
And here select this and this and add a
22:49
And here select this and this and add a
22:50
And here select this and this and add a coincidence relation. Now go to the task
22:53
coincidence relation. Now go to the task
22:53
coincidence relation. Now go to the task tab.
22:54
tab.
22:54
tab. So here
22:56
So here
22:56
So here something is conflicting. So to fix this
22:59
something is conflicting. So to fix this
22:59
something is conflicting. So to fix this we will press Ctrl Z. First we will
23:04
we will press Ctrl Z. First we will
23:04
we will press Ctrl Z. First we will delete this radius.
23:08
make it coincidence
23:10
make it coincidence
23:10
make it coincidence and then
23:12
and then
23:12
and then we will apply the radius. So here I will
23:16
we will apply the radius. So here I will
23:16
we will apply the radius. So here I will select a specific construction radius
23:19
select a specific construction radius
23:19
select a specific construction radius and select.
23:30
So here it is of a 25.28 28. That is
23:36
So here it is of a 25.28 28. That is
23:36
So here it is of a 25.28 28. That is because here one symmetric constraint is
23:39
because here one symmetric constraint is
23:39
because here one symmetric constraint is added. We will delete it.
23:42
added. We will delete it.
23:42
added. We will delete it. And now again select the radius
23:45
And now again select the radius
23:45
And now again select the radius constraint and apply it of 24.
23:50
constraint and apply it of 24.
23:50
constraint and apply it of 24. Now
23:53
Now
23:53
Now this point is not a coincidence. So we
23:55
this point is not a coincidence. So we
23:55
this point is not a coincidence. So we will select
23:58
will select
23:58
will select it and add a coincidence relation.
24:01
it and add a coincidence relation.
24:02
it and add a coincidence relation. And now
24:06
we will uh select a threepoint arc
24:11
we will uh select a threepoint arc
24:11
we will uh select a threepoint arc and
24:13
and
24:13
and create an arc and select this and this
24:17
create an arc and select this and this
24:17
create an arc and select this and this and add a tangent relation.
24:22
Now here
24:25
Now here
24:25
Now here first let's uh fix this various select a
24:28
first let's uh fix this various select a
24:28
first let's uh fix this various select a smart dimension. Select this and this
24:32
smart dimension. Select this and this
24:32
smart dimension. Select this and this and provide it of 38. And now also
24:37
and provide it of 38. And now also
24:37
and provide it of 38. And now also project
24:39
project
24:39
project this one. And here I will add one point.
24:47
So this point
24:50
So this point
24:50
So this point is not at meet. We know that thickness
24:53
is not at meet. We know that thickness
24:53
is not at meet. We know that thickness is of 8 mm. So here
24:59
I will select this and this
25:03
I will select this and this
25:03
I will select this and this and provide it of 4 mm. Now switch to
25:07
and provide it of 4 mm. Now switch to
25:07
and provide it of 4 mm. Now switch to the right plane.
25:10
Now let's move this arc. Select smart
25:14
Now let's move this arc. Select smart
25:14
Now let's move this arc. Select smart dimension and provide it of 12.
25:18
dimension and provide it of 12.
25:18
dimension and provide it of 12. And now let's select the line tool.
25:24
set it uh tangent.
25:29
And now here
25:32
And now here
25:32
And now here let's provide the dimension by pressing
25:35
let's provide the dimension by pressing
25:35
let's provide the dimension by pressing the control key and select a smart
25:38
the control key and select a smart
25:38
the control key and select a smart dimension and this is of a 24.
25:45
Now
25:48
Now
25:48
Now I will select a polyline tool and create
25:51
I will select a polyline tool and create
25:51
I will select a polyline tool and create a rough profile.
25:58
And now here
26:01
And now here
26:01
And now here I will rotate my model.
26:03
I will rotate my model.
26:03
I will rotate my model. And now
26:06
And now
26:06
And now I will select the line tool to close my
26:09
I will select the line tool to close my
26:09
I will select the line tool to close my profile. Join this
26:12
profile. Join this
26:12
profile. Join this with this.
26:17
Select line tool.
26:19
Select line tool.
26:19
Select line tool. Join this
26:22
Join this
26:22
Join this with this. Switch to the right view.
26:25
with this. Switch to the right view.
26:26
with this. Switch to the right view. Select a threepoint arc. Select this and
26:29
Select a threepoint arc. Select this and
26:29
Select a threepoint arc. Select this and this.
26:31
this.
26:31
this. And uh
26:34
And uh
26:34
And uh add a tangent.
26:36
add a tangent.
26:36
add a tangent. Now select the line tool.
26:40
Now select the line tool.
26:40
Now select the line tool. Select this
26:43
Select this
26:43
Select this and this.
26:47
Now select
26:50
Now select
26:50
Now select this point. This point at a coincidence.
26:55
this point. This point at a coincidence.
26:55
this point. This point at a coincidence. Now switch to the right view. And here
27:01
Now switch to the right view. And here
27:01
Now switch to the right view. And here if you see here 2 mm dimension is given.
27:05
if you see here 2 mm dimension is given.
27:05
if you see here 2 mm dimension is given. So select a smart dimension. Select this
27:08
So select a smart dimension. Select this
27:08
So select a smart dimension. Select this and this.
27:10
and this.
27:10
and this. Provide it 2 mm.
27:13
Provide it 2 mm.
27:13
Provide it 2 mm. And from this
27:17
And from this
27:17
And from this to this,
27:22
select this and this.
27:25
select this and this.
27:25
select this and this. Select this dimension. And this is of
27:29
Select this dimension. And this is of
27:29
Select this dimension. And this is of 28. Now let's move the dimensions so
27:32
28. Now let's move the dimensions so
27:32
28. Now let's move the dimensions so that uh you can uh clearly see the fully
27:36
that uh you can uh clearly see the fully
27:36
that uh you can uh clearly see the fully constrained sketch.
27:39
constrained sketch.
27:39
constrained sketch. So you can see that uh we have created
27:42
So you can see that uh we have created
27:42
So you can see that uh we have created this section and now we will come out of
27:45
this section and now we will come out of
27:45
this section and now we will come out of it and we will add a material of 6 mm.
27:49
it and we will add a material of 6 mm.
27:49
it and we will add a material of 6 mm. So select the sketch, click on the pad
27:53
So select the sketch, click on the pad
27:53
So select the sketch, click on the pad and make it symmetric to the plane
27:57
and make it symmetric to the plane
27:57
and make it symmetric to the plane and say okay.
27:59
and say okay.
28:00
and say okay. Now let's switch to the isometric view.
28:04
Now let's switch to the isometric view.
28:04
Now let's switch to the isometric view. Now let's move to the next feature. Next
28:07
Now let's move to the next feature. Next
28:07
Now let's move to the next feature. Next feature is to
28:10
feature is to
28:10
feature is to create this cut of diameter 36. So
28:14
create this cut of diameter 36. So
28:14
create this cut of diameter 36. So select the face and click on the sketch
28:17
select the face and click on the sketch
28:17
select the face and click on the sketch and uh
28:22
rotate it. And now select the circle
28:27
rotate it. And now select the circle
28:27
rotate it. And now select the circle and uh
28:29
and uh
28:29
and uh provide the diameter
28:32
provide the diameter
28:32
provide the diameter 36.
28:34
36.
28:34
36. Select this and this and add a
28:36
Select this and this and add a
28:36
Select this and this and add a coincidence.
28:38
coincidence.
28:38
coincidence. Select the sketch. Click on pocket.
28:43
Select the sketch. Click on pocket.
28:43
Select the sketch. Click on pocket. Say it through all. Say okay.
28:49
Now
28:51
Now
28:52
Now we will create these two holes. Select
28:55
we will create these two holes. Select
28:55
we will create these two holes. Select the face and click on the sketch.
28:58
the face and click on the sketch.
28:58
the face and click on the sketch. Click on the project geometry.
29:02
And now select the circle.
29:06
And now select the circle.
29:06
And now select the circle. Create a circle. You can also made with
29:10
Create a circle. You can also made with
29:10
Create a circle. You can also made with the whole wizard. And
29:13
the whole wizard. And
29:13
the whole wizard. And if you see here, so this is of a
29:15
if you see here, so this is of a
29:15
if you see here, so this is of a diameter 9.
29:18
diameter 9.
29:18
diameter 9. So select it, make it 9 mm and select
29:22
So select it, make it 9 mm and select
29:22
So select it, make it 9 mm and select this and this and make it equal. Click
29:25
this and this and make it equal. Click
29:25
this and this and make it equal. Click on close
29:27
on close
29:28
on close and uh click on the pocket tool.
29:33
Say up to face and I will define the end
29:35
Say up to face and I will define the end
29:35
Say up to face and I will define the end condition.
29:38
condition.
29:38
condition. Now
29:40
Now
29:40
Now let's create uh this diameter 10 holes.
29:45
let's create uh this diameter 10 holes.
29:45
let's create uh this diameter 10 holes. So select the face.
29:48
So select the face.
29:48
So select the face. Click on the sketch.
29:51
Click on the sketch.
29:51
Click on the sketch. Simply project geometry. Select a
29:54
Simply project geometry. Select a
29:54
Simply project geometry. Select a circle.
29:56
circle.
29:56
circle. Add a diameter 10.
30:01
Click on close. Select the sketch. Click
30:04
Click on close. Select the sketch. Click
30:04
Click on close. Select the sketch. Click on the pocket
30:07
on the pocket
30:07
on the pocket and say it through all. Say okay.
30:13
Now
30:15
Now
30:15
Now let's create uh these two holes.
30:20
Select the face and click on the sketch.
30:24
Select the face and click on the sketch.
30:24
Select the face and click on the sketch. Click on project geometry.
30:28
Click on project geometry.
30:28
Click on project geometry. Now select circle
30:36
and here it is of diameter 8. Select the
30:41
and here it is of diameter 8. Select the
30:41
and here it is of diameter 8. Select the smart dimension.
30:44
smart dimension.
30:44
smart dimension. diameter 8.
30:46
diameter 8.
30:46
diameter 8. Select this and this. Made it equal.
30:49
Select this and this. Made it equal.
30:49
Select this and this. Made it equal. Click on close.
30:52
Click on close.
30:52
Click on close. Click on the pocket.
30:55
Click on the pocket.
30:55
Click on the pocket. Select uh up to face and define the back
30:59
Select uh up to face and define the back
30:59
Select uh up to face and define the back face as a end condition. Say okay.
31:04
face as a end condition. Say okay.
31:04
face as a end condition. Say okay. And now
31:06
And now
31:06
And now if you see here there is a minor fillet.
31:10
if you see here there is a minor fillet.
31:10
if you see here there is a minor fillet. So here I will activate the fillet tool.
31:15
So here I will activate the fillet tool.
31:15
So here I will activate the fillet tool. Select this fit edge. So remove it.
31:21
Select this fit edge. So remove it.
31:21
Select this fit edge. So remove it. Select this edge
31:23
Select this edge
31:23
Select this edge and this edge.
31:25
and this edge.
31:26
and this edge. And let's provide 0.5 mm.
31:33
And now
31:35
And now
31:35
And now it will not perfectly merge because this
31:37
it will not perfectly merge because this
31:37
it will not perfectly merge because this is a curve face.
31:40
is a curve face.
31:40
is a curve face. We will edit it. Let's make to the 7.
31:51
Say okay.
31:54
Say okay.
31:54
Say okay. Now
31:56
Now
31:56
Now let's create the cut.
31:59
let's create the cut.
31:59
let's create the cut. The cut shown here. So we will select
32:01
The cut shown here. So we will select
32:01
The cut shown here. So we will select the face and click on the sketch
32:04
the face and click on the sketch
32:04
the face and click on the sketch and let's rotate our model.
32:10
Let's rotate to this position. And now
32:14
Let's rotate to this position. And now
32:14
Let's rotate to this position. And now first thing we will do is to project all
32:18
first thing we will do is to project all
32:18
first thing we will do is to project all required ages.
32:20
required ages.
32:20
required ages. This age radius, this one, this one,
32:24
This age radius, this one, this one,
32:24
This age radius, this one, this one, this one, this one and this one. And now
32:28
this one, this one and this one. And now
32:28
this one, this one and this one. And now here I will uh select a threepoint t
32:34
here I will uh select a threepoint t
32:34
here I will uh select a threepoint t on both the side.
32:37
on both the side.
32:37
on both the side. And this is our center. So I will first
32:39
And this is our center. So I will first
32:39
And this is our center. So I will first select this and this and add a
32:42
select this and this and add a
32:42
select this and this and add a coincidence.
32:44
coincidence.
32:44
coincidence. And select this and this and add a
32:47
And select this and this and add a
32:47
And select this and this and add a coincidence.
32:55
And now
32:58
And now
32:58
And now again select a threepoint dark
33:02
again select a threepoint dark
33:02
again select a threepoint dark on both the side.
33:06
on both the side.
33:06
on both the side. And here select this and this and add a
33:09
And here select this and this and add a
33:09
And here select this and this and add a coincidence. Select this and this and
33:12
coincidence. Select this and this and
33:12
coincidence. Select this and this and add a coincidence.
33:14
add a coincidence.
33:14
add a coincidence. And now let's add a radius. So select uh
33:18
And now let's add a radius. So select uh
33:18
And now let's add a radius. So select uh this radius and provide it of 10 mm.
33:22
this radius and provide it of 10 mm.
33:22
this radius and provide it of 10 mm. Select this and this and make it equal.
33:27
Select this and this and make it equal.
33:27
Select this and this and make it equal. And uh select a smart dimension and
33:30
And uh select a smart dimension and
33:30
And uh select a smart dimension and provide it of 34.
33:36
Select this and this and
33:40
Select this and this and
33:40
Select this and this and made it equal. And now
33:47
so here let's uh
33:52
so here let's uh
33:52
so here let's uh this is the 6 mm is given. So this is of
33:58
this is the 6 mm is given. So this is of
33:58
this is the 6 mm is given. So this is of R20.
34:02
This is our diameter 14. So this is R20.
34:07
This is our diameter 14. So this is R20.
34:07
This is our diameter 14. So this is R20. R20 - 6 means R14.
34:14
And now let's move it.
34:23
And now here
34:26
And now here
34:26
And now here select a line tool. Join this and this.
34:32
select a line tool. Join this and this.
34:32
select a line tool. Join this and this. this with this.
34:34
this with this.
34:34
this with this. Let's add a tangency relation. Select
34:37
Let's add a tangency relation. Select
34:38
Let's add a tangency relation. Select this and this and add a tangency
34:40
this and this and add a tangency
34:40
this and this and add a tangency relation.
34:43
Now
34:45
Now
34:45
Now select the line tool.
34:48
select the line tool.
34:48
select the line tool. Select this.
34:52
Let's first uh move it.
34:57
Select the line tool.
35:05
coincidence. Now add a tangency.
35:10
coincidence. Now add a tangency.
35:10
coincidence. Now add a tangency. Now select this and this and add a tency
35:16
and this and this radius is equal this
35:19
and this and this radius is equal this
35:19
and this and this radius is equal this and this is equal. Now
35:23
and this is equal. Now
35:23
and this is equal. Now let's see what is the unconstrain. So
35:27
let's see what is the unconstrain. So
35:27
let's see what is the unconstrain. So here this line and this line should be
35:30
here this line and this line should be
35:30
here this line and this line should be parallel.
35:33
parallel.
35:33
parallel. This and this should be parallel.
35:36
This and this should be parallel.
35:36
This and this should be parallel. Similarly this and this
35:40
Similarly this and this
35:40
Similarly this and this parallel and this and this is parallel.
35:44
parallel and this and this is parallel.
35:44
parallel and this and this is parallel. So our sketch is fully constrained. And
35:47
So our sketch is fully constrained. And
35:47
So our sketch is fully constrained. And now we will create the cut to the depth
35:50
now we will create the cut to the depth
35:50
now we will create the cut to the depth of 4 mm which we can see here. Select
35:53
of 4 mm which we can see here. Select
35:53
of 4 mm which we can see here. Select the sketch. Click on the pocket
35:58
the sketch. Click on the pocket
35:58
the sketch. Click on the pocket provided it of 4 mm. Say okay. And now
36:03
provided it of 4 mm. Say okay. And now
36:03
provided it of 4 mm. Say okay. And now let's uh provide the fillet of 4 mm to
36:06
let's uh provide the fillet of 4 mm to
36:06
let's uh provide the fillet of 4 mm to the all four ages. So click on the
36:08
the all four ages. So click on the
36:08
the all four ages. So click on the fillet. Select this age,
36:13
fillet. Select this age,
36:13
fillet. Select this age, this age,
36:16
this age,
36:16
this age, this one and this one.
36:20
this one and this one.
36:20
this one and this one. And now say okay.
36:24
And now say okay.
36:24
And now say okay. And now select the one of the age and
36:26
And now select the one of the age and
36:26
And now select the one of the age and add a fillet of 1 mm.
36:29
add a fillet of 1 mm.
36:30
add a fillet of 1 mm. Say okay.
36:33
Say okay.
36:33
Say okay. So let's press zero. So here you can see
36:37
So let's press zero. So here you can see
36:37
So let's press zero. So here you can see that we have successfully converted
36:41
that we have successfully converted
36:41
that we have successfully converted this orthographic view into the 3D model
36:44
this orthographic view into the 3D model
36:44
this orthographic view into the 3D model in freead with the help of a part design
36:47
in freead with the help of a part design
36:47
in freead with the help of a part design workbench. And you can see that our
36:50
workbench. And you can see that our
36:50
workbench. And you can see that our freed model is matching with the
36:53
freed model is matching with the
36:53
freed model is matching with the isometric view of our drawing. So this
36:57
isometric view of our drawing. So this
36:57
isometric view of our drawing. So this is all about this tutorial.
37:00
is all about this tutorial.
37:00
is all about this tutorial. Thank you for watching and thank you for
37:02
Thank you for watching and thank you for
37:02
Thank you for watching and thank you for your valuable time.
37:05
your valuable time.
37:05
your valuable time. [Music]
37:31
Heat. Heat.
37:34
Heat. Heat.
37:34
Heat. Heat. [Music]