0:00
hello friends welcome to free cat tutorial and in this tutorial we will
0:03
learn basics of loft and sweep tool in free cat you can also visit my website
0:09
macnexus.com where I write articles and tutorials on free cat you can also
0:15
download my tutorial source frame from the here you can also support my work by
0:21
buying my free cat crash course for beginner it is a very basic level course
0:26
for the beginner user where a beginner user can master the free CAD and you can
0:33
also support my work on coffee.com you can buy me a cup of coffee you will get
0:40
my website link and my Ko-Fi donation page link in a video description so we
0:48
will switch to the part design workbench and we will create a body and we will
0:54
on our origin plane we will select this XY plane
1:04
and we will create a sketch on this sketch we will draw a circle
1:24
and we will close it and now we will select this exit plane and create our path
1:36
We will draw very rough path and then we will constrain it with the dimension
1:51
I off the origin plane now I give the dimensions let see it is a 60 and angle
2:12
will give 160 and this angle let's say 130 this point to this point let's say 60 this we will keep
2:33
100 and this one we will keep 100 and now we will come out of the sketch
2:56
so this is the basic profile Now we will increase this height or we will make very appropriate
3:10
Let's see we make it 60 and this also 60
3:20
So here we have our profile and this is the path. Now we will insert the datum plane
3:29
So we will click on the datum plane and from here we will select this point
3:41
So point has been selected. So now this datum plane is a parallel
3:46
We will select this age and from here we will click on normal to age so you can see that a normal to age plane has created now we will select ok now we will select our datum plane and
4:04
create a sketch now we will draw a circle and let's say it is a diameter
4:19
15 or we can say 20 now we will close it so our bottom diameter let's say our bottom
4:33
diameter was a 50 so we will make it approximately 35 now we will close it now we will see the
4:48
loft and sweep in free cad now we will click on the additive pipe and from here we will
5:01
select our profile so this is the sketch one means first sketch now we will say ok now
5:11
from here path to sweep along if we select on object and if we select this
5:19
path so you can see that this profile is following this path now we will say ok
5:28
but how we can push our path to go from this profile to do that we will delete
5:39
and we will on our sketch now we will again go to the additive pipe and click on the sketch and now from here orientation method sorry in our transform mode we will select the multi section
6:00
and here on the multi section we can add our second section which is the this one
6:08
and path to swap along if we click on this then you can see that it has been
6:16
following on our second profile so this is the very basic tutorial how to use the
6:26
swap path in free cad in fact it is very easy to customize it if i go to my
6:38
path here if i add some fillet here then it will looks good
6:46
so i will go to the fillet and i will add some fillet
7:04
dimension we will constrain later so you can see that it has been updated
7:08
so this is the very basic tutorial about how to use the
7:13
sweep and loft in freecad and if i want to just use the loft then i can delete it and
7:24
i will on my sketch and i will off this data plane if i select this profile and this profile
7:32
and if i click on the loft so it will be loft without this path so i will say ok so
7:42
So we have seen the Swept tool and Loft tool in the same tutorial
7:48
So this is all about this tutorial
