Up next in 10
FreeCAD Technical Drawing Tutorial | FreeCAD Tutorial | FreeCAD Drawing | Mechnexus |
Sep 22, 2025
#freecad #freecadtutorial #freecaddrawing In this video I have explained How to Create Technical Drawing in FreeCAD with Techdraw Workbench ▶️ Get my Complete FreeCAD Course : From Zero to Expert ! https://ko-fi.com/s/1ab4385434 ▶️ Join my channel membership and keep supporting my work: https://www.youtube.com/channel/UCcn6z2whMaFu-_LDsEXCfVA/join ▶️ Visit my website for more info on FreeCAD-: https://mechnexus.com/ ▶️ Download Source File of Tutorial-: https://mechnexus.com/mechnexus-youtube-tutorial-source-file/ ▶️ Buy Me a Coffee I am very grateful that you watch my videos and I am constantly trying to improve the quality of the videos on this channel. If you'd like to help me do this, please consider supporting me so that I can to continue to produce content for your enjoyment. 👉 Help support this channel by buying me a coffee: https://ko-fi.com/mechnexus
View Video Transcript
0:01
Hello friends, welcome to fre tutorial
0:03
Hello friends, welcome to fre tutorial
0:03
Hello friends, welcome to fre tutorial and in this tutorial we will create a
0:06
and in this tutorial we will create a
0:06
and in this tutorial we will create a technical drawing with the help of a
0:08
technical drawing with the help of a
0:08
technical drawing with the help of a tech draw workbench in frecad. As you
0:10
tech draw workbench in frecad. As you
0:10
tech draw workbench in frecad. As you can see that I have already modeled this
0:13
can see that I have already modeled this
0:13
can see that I have already modeled this shaft
0:14
shaft
0:14
shaft with respect to the dimension shown and
0:17
with respect to the dimension shown and
0:17
with respect to the dimension shown and now we will create this technical
0:19
now we will create this technical
0:19
now we will create this technical drawing. So for this tutorial I am using
0:22
drawing. So for this tutorial I am using
0:22
drawing. So for this tutorial I am using the free version 1.0.
0:26
the free version 1.0.
0:26
the free version 1.0. So you must have at least 1.0 zero or
0:30
So you must have at least 1.0 zero or
0:30
So you must have at least 1.0 zero or higher version than this
0:34
higher version than this
0:34
higher version than this you can visit my website mcnexus.com
0:37
you can visit my website mcnexus.com
0:37
you can visit my website mcnexus.com where I write articles and uh tutorials
0:40
where I write articles and uh tutorials
0:40
where I write articles and uh tutorials on free and here you can see that I have
0:44
on free and here you can see that I have
0:44
on free and here you can see that I have written so many articles on uh free
0:49
written so many articles on uh free
0:49
written so many articles on uh free you can visit the free tutorials tab
0:53
you can visit the free tutorials tab
0:53
you can visit the free tutorials tab where you will find the stepbystep guide
0:57
where you will find the stepbystep guide
0:57
where you will find the stepbystep guide to model uh part here. I have also
1:01
to model uh part here. I have also
1:01
to model uh part here. I have also written so many free tutorials of a
1:04
written so many free tutorials of a
1:04
written so many free tutorials of a part.
1:05
part.
1:05
part. You can also visit my free 3D models by
1:09
You can also visit my free 3D models by
1:09
You can also visit my free 3D models by clicking on the free 3D models tab. And
1:12
clicking on the free 3D models tab. And
1:12
clicking on the free 3D models tab. And here I have uploaded so many mechanical
1:15
here I have uploaded so many mechanical
1:15
here I have uploaded so many mechanical parts which you can uh download, modify
1:20
parts which you can uh download, modify
1:20
parts which you can uh download, modify and uh use in your projects.
1:24
and uh use in your projects.
1:24
and uh use in your projects. You can also visit my 2D drawing library
1:28
You can also visit my 2D drawing library
1:28
You can also visit my 2D drawing library by clicking on the 2D drawing. Here I
1:30
by clicking on the 2D drawing. Here I
1:30
by clicking on the 2D drawing. Here I have uploaded so many 2D drawings of
1:34
have uploaded so many 2D drawings of
1:34
have uploaded so many 2D drawings of mechanical parts. If you like my method
1:37
mechanical parts. If you like my method
1:37
mechanical parts. If you like my method of teaching then you can support me on
1:40
of teaching then you can support me on
1:40
of teaching then you can support me on coff.com/macus.
1:43
You can buy me a cup of coffee. your
1:47
You can buy me a cup of coffee. your
1:47
You can buy me a cup of coffee. your small support will help this channels to
1:49
small support will help this channels to
1:49
small support will help this channels to grow and uh it will motivate me to
1:52
grow and uh it will motivate me to
1:52
grow and uh it will motivate me to create more awesome content on a free
1:56
create more awesome content on a free
1:56
create more awesome content on a free CAD. So let's come back to our tutorial.
2:03
So to create a technical drawing I will
2:05
So to create a technical drawing I will
2:05
So to create a technical drawing I will uh switch to the tech draw workbench
2:08
uh switch to the tech draw workbench
2:08
uh switch to the tech draw workbench and in a tech draw workbench I will
2:11
and in a tech draw workbench I will
2:11
and in a tech draw workbench I will access my template library.
2:15
access my template library.
2:15
access my template library. And here
2:18
if we see the drawing so we have the two
2:21
if we see the drawing so we have the two
2:21
if we see the drawing so we have the two sections. So I will prefer A4 landscape
2:26
sections. So I will prefer A4 landscape
2:26
sections. So I will prefer A4 landscape advance.
2:31
And now I will switch to my model tab
2:35
And now I will switch to my model tab
2:35
And now I will switch to my model tab and click on the projection group after
2:38
and click on the projection group after
2:38
and click on the projection group after uh selecting the my body.
2:43
And here now I will uh insert my first
2:49
And here now I will uh insert my first
2:49
And here now I will uh insert my first view. So let's rotate our model.
2:58
So this is the view which we want
3:03
So this is the view which we want
3:03
So this is the view which we want and here is a scale type is of a pace
3:06
and here is a scale type is of a pace
3:06
and here is a scale type is of a pace type and I will say okay. Now you can
3:10
type and I will say okay. Now you can
3:10
type and I will say okay. Now you can see that uh our uh view is larger than
3:15
see that uh our uh view is larger than
3:16
see that uh our uh view is larger than our sheet. So we will go on the page and
3:18
our sheet. So we will go on the page and
3:18
our sheet. So we will go on the page and here is a scale and here I will scale
3:22
here is a scale and here I will scale
3:22
here is a scale and here I will scale put uh 0.7
3:27
and let's see so it is not updating so
3:31
and let's see so it is not updating so
3:31
and let's see so it is not updating so right click it and recomp compute it
3:35
right click it and recomp compute it
3:35
right click it and recomp compute it so let's make a shorter again instead of
3:38
so let's make a shorter again instead of
3:38
so let's make a shorter again instead of a 7.5
3:41
a 7.5
3:41
a 7.5 five.
3:48
Let's right click and recomputee it.
3:53
Let's right click and recomputee it.
3:53
Let's right click and recomputee it. So now if you see this is more than
3:56
So now if you see this is more than
3:56
So now if you see this is more than enough to give the dimensions.
3:59
enough to give the dimensions.
3:59
enough to give the dimensions. So let's first give the dimensions
4:04
which is the overall length. So here I
4:08
which is the overall length. So here I
4:08
which is the overall length. So here I will select the smart dimension.
4:11
will select the smart dimension.
4:11
will select the smart dimension. Select this point.
4:14
Select this point.
4:14
Select this point. Select this point
4:17
Select this point
4:17
Select this point and give the 470 dimension.
4:20
and give the 470 dimension.
4:20
and give the 470 dimension. And now let's give this diameter 70.
4:26
Select this line and this line and give
4:30
Select this line and this line and give
4:30
Select this line and this line and give the 70. But it is a normal length. So to
4:34
the 70. But it is a normal length. So to
4:34
the 70. But it is a normal length. So to make a diameter,
4:36
make a diameter,
4:36
make a diameter, I will uh insert the prefix diameter.
4:42
I will uh insert the prefix diameter.
4:42
I will uh insert the prefix diameter. And here we will go to the scale.
4:45
And here we will go to the scale.
4:45
And here we will go to the scale. Instead of uh
4:48
Instead of uh
4:48
Instead of uh 0.5 let's make a 0.45.
4:56
Now let's move this uh diameter closer.
5:00
Now let's move this uh diameter closer.
5:00
Now let's move this uh diameter closer. And now here if you see though this 5 mm
5:04
And now here if you see though this 5 mm
5:04
And now here if you see though this 5 mm dimension given from the tangent which
5:07
dimension given from the tangent which
5:07
dimension given from the tangent which is not a right practice to give from the
5:10
is not a right practice to give from the
5:10
is not a right practice to give from the tangent because it is impossible to
5:12
tangent because it is impossible to
5:12
tangent because it is impossible to measure. So we will improvise the
5:15
measure. So we will improvise the
5:16
measure. So we will improvise the drawing and uh we will give the
5:19
drawing and uh we will give the
5:19
drawing and uh we will give the dimension from the age
5:23
and here it is giving overall. So
5:26
and here it is giving overall. So
5:26
and here it is giving overall. So instead of overall we will give the
5:28
instead of overall we will give the
5:28
instead of overall we will give the center to center.
5:31
center to center.
5:31
center to center. Let's move it and align it. And now here
5:36
Let's move it and align it. And now here
5:36
Let's move it and align it. And now here is a chamfer.
5:39
is a chamfer.
5:39
is a chamfer. So if you see this because of this part
5:42
So if you see this because of this part
5:42
So if you see this because of this part point we cannot see it. So we will off
5:44
point we cannot see it. So we will off
5:44
point we cannot see it. So we will off the frame.
5:46
the frame.
5:46
the frame. And here I will select this and these
5:48
And here I will select this and these
5:48
And here I will select this and these two line.
5:52
And here it is a chamfer of a 1 1 mm but
6:00
And here it is a chamfer of a 1 1 mm but
6:00
And here it is a chamfer of a 1 1 mm but here it is giving 1.6. So we will go to
6:03
here it is giving 1.6. So we will go to
6:03
here it is giving 1.6. So we will go to the model
6:08
and uh let's see this uh chamfer.
6:13
and uh let's see this uh chamfer.
6:13
and uh let's see this uh chamfer. So let's edit it. So here we have a
6:17
So let's edit it. So here we have a
6:18
So let's edit it. So here we have a selected
6:19
selected
6:19
selected the multiple chamfer.
6:23
the multiple chamfer.
6:23
the multiple chamfer. So here we wanted to modify it. So let's
6:26
So here we wanted to modify it. So let's
6:26
So here we wanted to modify it. So let's make it 1.6.
6:31
So it is applicable to the all the
6:33
So it is applicable to the all the
6:33
So it is applicable to the all the edges. So we will cancel it
6:39
and uh
6:41
and uh
6:41
and uh it will again edit the chamfer.
6:45
it will again edit the chamfer.
6:45
it will again edit the chamfer. Go to this and remove it. Say okay.
6:50
Go to this and remove it. Say okay.
6:50
Go to this and remove it. Say okay. Now
6:52
Now
6:52
Now here I will again select this chamfer.
6:58
Select this age and uh move to the part
7:02
Select this age and uh move to the part
7:02
Select this age and uh move to the part design and make the chamer of
7:06
design and make the chamer of
7:06
design and make the chamer of 1.6 and let's say okay.
7:11
1.6 and let's say okay.
7:11
1.6 and let's say okay. Now
7:12
Now
7:12
Now let's move to the our drawing. So you
7:15
let's move to the our drawing. So you
7:15
let's move to the our drawing. So you can see that chamfer is updated to the
7:18
can see that chamfer is updated to the
7:18
can see that chamfer is updated to the 1.6.
7:23
Now here it is 1.6. So we will override
7:27
Now here it is 1.6. So we will override
7:27
Now here it is 1.6. So we will override this dimensions. So we will go to this
7:29
this dimensions. So we will go to this
7:30
this dimensions. So we will go to this 1.6 dimension property. So here I will
7:33
1.6 dimension property. So here I will
7:33
1.6 dimension property. So here I will press the X symbol and give the 45. Now
7:37
press the X symbol and give the 45. Now
7:38
press the X symbol and give the 45. Now here I wanted to insert a degree. To
7:40
here I wanted to insert a degree. To
7:40
here I wanted to insert a degree. To insert a degree symbol press alt key and
7:44
insert a degree symbol press alt key and
7:44
insert a degree symbol press alt key and press 0176.
7:48
press 0176.
7:48
press 0176. So once you
7:50
So once you
7:50
So once you press it
7:52
press it
7:52
press it alt + 076 a degree symbol will be get
7:55
alt + 076 a degree symbol will be get
7:56
alt + 076 a degree symbol will be get inserted here and it will reflect on the
7:58
inserted here and it will reflect on the
7:58
inserted here and it will reflect on the drawing. Now
8:01
drawing. Now
8:01
drawing. Now now let's here you can see that uh this
8:05
now let's here you can see that uh this
8:05
now let's here you can see that uh this dimension
8:09
is misbehaving. So we will delete it.
8:12
is misbehaving. So we will delete it.
8:12
is misbehaving. So we will delete it. And here let's uh insert our own center
8:15
And here let's uh insert our own center
8:15
And here let's uh insert our own center mark. Select these two and uh click on
8:18
mark. Select these two and uh click on
8:18
mark. Select these two and uh click on the center marks. And now select this
8:20
the center marks. And now select this
8:20
the center marks. And now select this vertical line and this one. And uh set
8:24
vertical line and this one. And uh set
8:24
vertical line and this one. And uh set uh horizontal dimension of 80.
8:28
uh horizontal dimension of 80.
8:28
uh horizontal dimension of 80. And now select this outer edge
8:31
And now select this outer edge
8:31
And now select this outer edge and uh
8:36
this one
8:38
this one
8:38
this one this and this. So if you are facing the
8:42
this and this. So if you are facing the
8:42
this and this. So if you are facing the issue so best way is that
8:51
zoom it
8:53
zoom it
8:54
zoom it and
8:56
and
8:56
and press
8:57
press
8:57
press smart dimension. First escape it then
9:01
smart dimension. First escape it then
9:01
smart dimension. First escape it then select a smart dimension. Select this
9:03
select a smart dimension. Select this
9:03
select a smart dimension. Select this line and
9:06
line and
9:06
line and this line.
9:08
this line.
9:08
this line. So here it is not taking the horizontal
9:13
So here it is not taking the horizontal
9:13
So here it is not taking the horizontal dimension. So best practice is that uh
9:17
dimension. So best practice is that uh
9:17
dimension. So best practice is that uh specific select horizontal dimension.
9:20
specific select horizontal dimension.
9:20
specific select horizontal dimension. Select this
9:22
Select this
9:22
Select this and this
9:24
and this
9:24
and this and wait
9:32
84.
9:34
84.
9:34
84. Now
9:36
Now
9:36
Now delete the extra dimension.
9:46
So this is uh happening because we have
9:49
So this is uh happening because we have
9:50
So this is uh happening because we have fit this model in a A4 sheet. So
9:55
fit this model in a A4 sheet. So
9:55
fit this model in a A4 sheet. So for the right practice
9:59
we will do one more thing. We will uh go
10:02
we will do one more thing. We will uh go
10:02
we will do one more thing. We will uh go to the page here and
10:06
to the page here and
10:06
to the page here and we will uh make our model 1 to one scale
10:10
we will uh make our model 1 to one scale
10:10
we will uh make our model 1 to one scale and press enter.
10:17
So it so it is got updated here
10:21
So it so it is got updated here
10:21
So it so it is got updated here and
10:24
and
10:24
and it is updating.
10:31
So now when you make the model bigger
10:33
So now when you make the model bigger
10:33
So now when you make the model bigger you will see the exact one and now on
10:37
you will see the exact one and now on
10:37
you will see the exact one and now on the frame and move this view outside of
10:41
the frame and move this view outside of
10:41
the frame and move this view outside of the shape. Now we will give the
10:43
the shape. Now we will give the
10:43
the shape. Now we will give the dimensions and at the end we will uh
10:46
dimensions and at the end we will uh
10:46
dimensions and at the end we will uh reduce its scale
10:51
or we will uh change the scale size
10:55
or we will uh change the scale size
10:55
or we will uh change the scale size which we will decide the later. So let's
10:57
which we will decide the later. So let's
10:57
which we will decide the later. So let's give the dimensions. So here we have
10:59
give the dimensions. So here we have
10:59
give the dimensions. So here we have given the 84 and now let's give this
11:03
given the 84 and now let's give this
11:03
given the 84 and now let's give this dimension 188.
11:05
dimension 188.
11:05
dimension 188. So here I will uh select this part
11:08
So here I will uh select this part
11:08
So here I will uh select this part point. Press control key and I will
11:11
point. Press control key and I will
11:11
point. Press control key and I will select this part point and I will select
11:14
select this part point and I will select
11:14
select this part point and I will select the horizontal dimension.
11:19
So here 188 is spot inserted.
11:23
So here 188 is spot inserted.
11:23
So here 188 is spot inserted. So we have enough space. So we will
11:28
So we have enough space. So we will
11:28
So we have enough space. So we will move it and now there is a dimension 58.
11:32
move it and now there is a dimension 58.
11:32
move it and now there is a dimension 58. So I will select this cut point and this
11:36
So I will select this cut point and this
11:36
So I will select this cut point and this cut point and give the horizontal
11:39
cut point and give the horizontal
11:39
cut point and give the horizontal dimension. So here cannot make 2D
11:42
dimension. So here cannot make 2D
11:42
dimension. So here cannot make 2D dimension because we have not selected
11:44
dimension because we have not selected
11:44
dimension because we have not selected this point and now
11:47
this point and now
11:47
this point and now we'll make the 2D dimension.
11:50
we'll make the 2D dimension.
11:50
we'll make the 2D dimension. So this is from not from this point. So
11:54
So this is from not from this point. So
11:54
So this is from not from this point. So I will delete it.
12:15
So have some patience.
12:18
So have some patience.
12:18
So have some patience. Now I will select this C point and this
12:21
Now I will select this C point and this
12:22
Now I will select this C point and this ending C point.
12:23
ending C point.
12:23
ending C point. and directly select the dimension. So
12:26
and directly select the dimension. So
12:26
and directly select the dimension. So here we have given 58 as well. And now
12:31
here we have given 58 as well. And now
12:31
here we have given 58 as well. And now let's uh change our sheet size because
12:34
let's uh change our sheet size because
12:34
let's uh change our sheet size because A3 knots look smooth. So we will go on a
12:38
A3 knots look smooth. So we will go on a
12:38
A3 knots look smooth. So we will go on a template section and in a template
12:41
template section and in a template
12:41
template section and in a template section you will see one template path
12:43
section you will see one template path
12:43
section you will see one template path here. Click on these three dots and
12:46
here. Click on these three dots and
12:46
here. Click on these three dots and instead of A3 landscape we uh A4
12:50
instead of A3 landscape we uh A4
12:50
instead of A3 landscape we uh A4 landscape we will select A3
12:53
landscape we will select A3
12:53
landscape we will select A3 landscape advance and save. Okay.
12:58
landscape advance and save. Okay.
12:58
landscape advance and save. Okay. Now this sheets looks to be good
13:02
Now this sheets looks to be good
13:02
Now this sheets looks to be good and here we are getting a recmputee
13:05
and here we are getting a recmputee
13:05
and here we are getting a recmputee issue. So have some patience. Frecad
13:09
issue. So have some patience. Frecad
13:09
issue. So have some patience. Frecad will solve it. Yes, it is got solved.
13:12
will solve it. Yes, it is got solved.
13:12
will solve it. Yes, it is got solved. And now I will move my view in the
13:15
And now I will move my view in the
13:15
And now I will move my view in the sheets.
13:17
sheets.
13:17
sheets. And now here
13:20
And now here
13:20
And now here I will go to the page and uh let's
13:23
I will go to the page and uh let's
13:23
I will go to the page and uh let's change skill type to the point8
13:40
and let's see
13:46
it is updating.
13:48
it is updating.
13:48
it is updating. Yes, it is got updated
13:51
Yes, it is got updated
13:51
Yes, it is got updated and let's move the view.
13:55
and let's move the view.
13:55
and let's move the view. So instead of a
13:58
So instead of a
13:58
So instead of a 8, let's make a 7 will be much better.
14:11
Yes. So this looks good and uh dimension
14:15
Yes. So this looks good and uh dimension
14:15
Yes. So this looks good and uh dimension we are seeing is not updated. So have a
14:17
we are seeing is not updated. So have a
14:17
we are seeing is not updated. So have a patience it will get fixed
14:19
patience it will get fixed
14:19
patience it will get fixed automatically. Okay. So it is got fixed
14:23
automatically. Okay. So it is got fixed
14:23
automatically. Okay. So it is got fixed and uh now I will uh move the dimensions
14:27
and uh now I will uh move the dimensions
14:27
and uh now I will uh move the dimensions again.
14:29
again.
14:29
again. Move it.
14:32
And let's move it to the top and align
14:36
And let's move it to the top and align
14:36
And let's move it to the top and align this 84.
14:39
this 84.
14:39
this 84. line this 188
14:42
line this 188
14:42
line this 188 and move it to the center.
14:45
and move it to the center.
14:45
and move it to the center. Similarly, this 58
14:48
Similarly, this 58
14:48
Similarly, this 58 and now here is a diameter 80. So, I
14:52
and now here is a diameter 80. So, I
14:52
and now here is a diameter 80. So, I will select this line, this line and
14:55
will select this line, this line and
14:55
will select this line, this line and specific select vertical dimension. So,
14:58
specific select vertical dimension. So,
14:58
specific select vertical dimension. So, 80 is inserted. Now I will insert a
15:00
80 is inserted. Now I will insert a
15:00
80 is inserted. Now I will insert a diameter prefix
15:03
diameter prefix
15:03
diameter prefix and here is a R2 is given.
15:06
and here is a R2 is given.
15:06
and here is a R2 is given. So I will off the frame.
15:10
So I will off the frame.
15:10
So I will off the frame. So here fillet is not given. So you can
15:13
So here fillet is not given. So you can
15:13
So here fillet is not given. So you can provide R to fillet. And now
15:17
provide R to fillet. And now
15:18
provide R to fillet. And now on this slot we will insert our own
15:20
on this slot we will insert our own
15:20
on this slot we will insert our own center marks. Select these two arc and
15:23
center marks. Select these two arc and
15:23
center marks. Select these two arc and provide the center marks. And let's
15:25
provide the center marks. And let's
15:25
provide the center marks. And let's provide a horizontal distance
15:30
provide a horizontal distance
15:30
provide a horizontal distance which is of a 75 and uh provide this
15:34
which is of a 75 and uh provide this
15:34
which is of a 75 and uh provide this radius of R
15:38
radius of R
15:38
radius of R 12.5
15:42
move it here and uh this is R1 12.5 at
15:46
move it here and uh this is R1 12.5 at
15:46
move it here and uh this is R1 12.5 at two locations. So we will select this
15:49
two locations. So we will select this
15:49
two locations. So we will select this dimension and uh go in a format
15:52
dimension and uh go in a format
15:52
dimension and uh go in a format specifications and give it a 2x
15:59
and let's say okay
16:02
and let's say okay
16:02
and let's say okay and now
16:09
now we have to define its slots
16:11
now we have to define its slots
16:11
now we have to define its slots position.
16:18
So let's move this radius at this
16:21
So let's move this radius at this
16:22
So let's move this radius at this location. Now we want to define the slot
16:24
location. Now we want to define the slot
16:24
location. Now we want to define the slot position. So we will uh
16:28
position. So we will uh
16:28
position. So we will uh select this vertical center line
16:32
select this vertical center line
16:32
select this vertical center line and
16:34
and
16:34
and select this line and specific select
16:38
select this line and specific select
16:38
select this line and specific select horizontal dimension.
16:46
So this slot is defined. This slot is
16:49
So this slot is defined. This slot is
16:49
So this slot is defined. This slot is defined.
16:53
And now the radius is undefined. So we
16:57
And now the radius is undefined. So we
16:57
And now the radius is undefined. So we will define the radius R10.
17:00
will define the radius R10.
17:00
will define the radius R10. So
17:02
So
17:02
So here
17:05
we will mention it 2x. In fact, uh it is
17:09
we will mention it 2x. In fact, uh it is
17:09
we will mention it 2x. In fact, uh it is not necessary but uh we have to follow
17:12
not necessary but uh we have to follow
17:12
not necessary but uh we have to follow the same practice. If I have a provided
17:14
the same practice. If I have a provided
17:14
the same practice. If I have a provided 2x, then I have to provide here as well.
17:18
2x, then I have to provide here as well.
17:18
2x, then I have to provide here as well. And now
17:21
And now
17:21
And now we have to define this diameter here.
17:26
So now I will select this line, this
17:29
So now I will select this line, this
17:29
So now I will select this line, this line and I will select a specific
17:32
line and I will select a specific
17:32
line and I will select a specific vertical dimension
17:34
vertical dimension
17:34
vertical dimension and I will insert a diameter prefix. And
17:40
and I will insert a diameter prefix. And
17:40
and I will insert a diameter prefix. And now I will uh define this diameter.
17:44
now I will uh define this diameter.
17:44
now I will uh define this diameter. Select this horizontal line and this
17:47
Select this horizontal line and this
17:47
Select this horizontal line and this horizontal line and I will select a
17:51
horizontal line and I will select a
17:51
horizontal line and I will select a specific vertical diameter
17:54
specific vertical diameter
17:54
specific vertical diameter say 19. And here I will also insert a
17:58
say 19. And here I will also insert a
17:58
say 19. And here I will also insert a diameter prefix. So this diameter is
18:01
diameter prefix. So this diameter is
18:01
diameter prefix. So this diameter is defined. This one is defined. This one
18:03
defined. This one is defined. This one
18:03
defined. This one is defined. This one is defined. And now define this one.
18:08
is defined. And now define this one.
18:08
is defined. And now define this one. Select this and this. And uh set it to
18:13
Select this and this. And uh set it to
18:13
Select this and this. And uh set it to the vertical
18:15
the vertical
18:15
the vertical 70. And uh insert a diameter prefix
18:23
slot. Center to center is defined. Age
18:25
slot. Center to center is defined. Age
18:25
slot. Center to center is defined. Age is defined. And now let's uh define
18:29
is defined. And now let's uh define
18:29
is defined. And now let's uh define overall length. Select this vertical
18:31
overall length. Select this vertical
18:31
overall length. Select this vertical line and uh zoom and select the in
18:35
line and uh zoom and select the in
18:35
line and uh zoom and select the in vertical line and specific select the
18:38
vertical line and specific select the
18:38
vertical line and specific select the horizontal dimension.
18:42
So let's
18:44
So let's
18:44
So let's freetate it slow little bit. So have
18:46
freetate it slow little bit. So have
18:46
freetate it slow little bit. So have patience.
18:58
So overall length dimension is uh
19:00
So overall length dimension is uh
19:00
So overall length dimension is uh inserted here. So let's uh move it.
19:06
inserted here. So let's uh move it.
19:06
inserted here. So let's uh move it. So here uh we have given the all
19:09
So here uh we have given the all
19:09
So here uh we have given the all necessary dimensions
19:12
necessary dimensions
19:12
necessary dimensions and uh
19:14
and uh
19:14
and uh for the common chamfer and R2 I'm not
19:17
for the common chamfer and R2 I'm not
19:17
for the common chamfer and R2 I'm not giving the note.
19:20
giving the note.
19:20
giving the note. Now let's learn the important part which
19:23
Now let's learn the important part which
19:23
Now let's learn the important part which is the section A a and section BB. So we
19:27
is the section A a and section BB. So we
19:27
is the section A a and section BB. So we will take one section at this slot and
19:30
will take one section at this slot and
19:30
will take one section at this slot and one section at this slot. So to take the
19:33
one section at this slot. So to take the
19:33
one section at this slot. So to take the section you have to on the frame and
19:35
section you have to on the frame and
19:35
section you have to on the frame and select the view and uh from here
19:39
select the view and uh from here
19:39
select the view and uh from here select the section option.
20:04
And now here I will uh
20:07
And now here I will uh
20:07
And now here I will uh select either this or this. So here I
20:12
select either this or this. So here I
20:12
select either this or this. So here I will select this one and give the label
20:15
will select this one and give the label
20:15
will select this one and give the label of a section A. And here at the downside
20:19
of a section A. And here at the downside
20:19
of a section A. And here at the downside I will click on the live update. And now
20:24
I will click on the live update. And now
20:24
I will click on the live update. And now you can see that uh section A is created
20:29
you can see that uh section A is created
20:29
you can see that uh section A is created but we wanted to move these sections to
20:32
but we wanted to move these sections to
20:32
but we wanted to move these sections to here.
20:34
here.
20:34
here. So here we are seeing the distance to
20:36
So here we are seeing the distance to
20:36
So here we are seeing the distance to 35. So let's make a
20:41
minus 50. Let's see and uh say update
20:45
minus 50. Let's see and uh say update
20:45
minus 50. Let's see and uh say update now where it is move.
20:49
So it move on the other side. So we will
20:52
So it move on the other side. So we will
20:52
So it move on the other side. So we will make it uh + 50 and say update now. So
20:58
make it uh + 50 and say update now. So
20:58
make it uh + 50 and say update now. So it is going other side. So it was 235.
21:03
it is going other side. So it was 235.
21:03
it is going other side. So it was 235. So I will make it minus uh 450.
21:08
So I will make it minus uh 450.
21:08
So I will make it minus uh 450. And let's see. So it is uh it is at the
21:12
And let's see. So it is uh it is at the
21:12
And let's see. So it is uh it is at the exact location where I want it.
21:16
exact location where I want it.
21:16
exact location where I want it. But
21:18
But
21:18
But let's uh
21:20
let's uh
21:20
let's uh move to the little bit in the center.
21:30
So that is okay because we will get the
21:33
So that is okay because we will get the
21:33
So that is okay because we will get the same profile anywhere we cut. And now
21:36
same profile anywhere we cut. And now
21:36
same profile anywhere we cut. And now say apply.
21:39
say apply.
21:39
say apply. Now we will uh define this dimension.
21:45
Now we will uh define this dimension.
21:45
Now we will uh define this dimension. So let's off the frame. So here first
21:49
So let's off the frame. So here first
21:49
So let's off the frame. So here first thing we will do is to insert a center
21:51
thing we will do is to insert a center
21:51
thing we will do is to insert a center marks
21:53
marks
21:53
marks and I will select this horizontal line
21:57
and I will select this horizontal line
21:58
and I will select this horizontal line and this horizontal line and uh go with
22:01
and this horizontal line and uh go with
22:01
and this horizontal line and uh go with the vertical dimension.
22:04
the vertical dimension.
22:04
the vertical dimension. So here radius is R10. So it will be R20
22:08
So here radius is R10. So it will be R20
22:08
So here radius is R10. So it will be R20 and here it is defined the dimension
22:10
and here it is defined the dimension
22:10
and here it is defined the dimension from the tangent. So we will not define
22:13
from the tangent. So we will not define
22:13
from the tangent. So we will not define from the tangent. So we will select this
22:16
from the tangent. So we will select this
22:16
from the tangent. So we will select this and uh go with the insert diameter. So
22:20
and uh go with the insert diameter. So
22:20
and uh go with the insert diameter. So now it is of a diameter 70.
22:24
now it is of a diameter 70.
22:24
now it is of a diameter 70. Now to define the slot position this cut
22:29
Now to define the slot position this cut
22:29
Now to define the slot position this cut position I will provide one horizontal
22:32
position I will provide one horizontal
22:32
position I will provide one horizontal dimension. So this is the right method
22:37
dimension. So this is the right method
22:37
dimension. So this is the right method to
22:39
to
22:39
to showcase.
22:41
showcase.
22:41
showcase. And now here I will go here in a 20
22:44
And now here I will go here in a 20
22:44
And now here I will go here in a 20 dimensions and uh I will provide the
22:47
dimensions and uh I will provide the
22:47
dimensions and uh I will provide the equal symbol on a right hand side and
22:50
equal symbol on a right hand side and
22:50
equal symbol on a right hand side and equal symbol on the left hand side which
22:53
equal symbol on the left hand side which
22:53
equal symbol on the left hand side which means that this 20 dimension is a
22:56
means that this 20 dimension is a
22:56
means that this 20 dimension is a symmetric with respect to this center
23:00
symmetric with respect to this center
23:00
symmetric with respect to this center line.
23:03
Now we will insert one more section
23:06
Now we will insert one more section
23:06
Now we will insert one more section section BB. So for this
23:11
section BB. So for this
23:11
section BB. So for this we will uh on the frame
23:14
we will uh on the frame
23:14
we will uh on the frame and select it and go here and uh click
23:19
and select it and go here and uh click
23:19
and select it and go here and uh click on the section view and we will select
23:21
on the section view and we will select
23:22
on the section view and we will select the same section we have selected for
23:24
the same section we have selected for
23:24
the same section we have selected for AA. And now here I will give the label B
23:28
AA. And now here I will give the label B
23:28
AA. And now here I will give the label B and uh from here I will click on the
23:30
and uh from here I will click on the
23:30
and uh from here I will click on the live updates
23:33
live updates
23:33
live updates and in a live update we are not seeing
23:35
and in a live update we are not seeing
23:35
and in a live update we are not seeing it. So we have to move it.
23:38
it. So we have to move it.
23:38
it. So we have to move it. So in this case let's uh
23:43
So in this case let's uh
23:43
So in this case let's uh decrease this value. So as you can see
23:46
decrease this value. So as you can see
23:46
decrease this value. So as you can see that I'm decreasing my section is
23:48
that I'm decreasing my section is
23:48
that I'm decreasing my section is moving. So instead of uh it is now
23:53
moving. So instead of uh it is now
23:53
moving. So instead of uh it is now 223. So let's uh make it uh 200 and
23:59
223. So let's uh make it uh 200 and
23:59
223. So let's uh make it uh 200 and click on update.
24:01
click on update.
24:01
click on update. Let's may let's reduce this to the 150
24:06
Let's may let's reduce this to the 150
24:06
Let's may let's reduce this to the 150 minus 150.
24:10
minus 150.
24:10
minus 150. So now it is at a perfect location.
24:14
So now it is at a perfect location.
24:14
So now it is at a perfect location. And now I will say okay.
24:20
And now here
24:26
our section is inserted. And now I will
24:28
our section is inserted. And now I will
24:28
our section is inserted. And now I will move this 75 dimensions to the top. and
24:31
move this 75 dimensions to the top. and
24:31
move this 75 dimensions to the top. and it is 35 37.5 and also move it and
24:38
it is 35 37.5 and also move it and
24:38
it is 35 37.5 and also move it and I will move this section A a to the left
24:40
I will move this section A a to the left
24:40
I will move this section A a to the left hand side and section B to the left hand
24:43
hand side and section B to the left hand
24:43
hand side and section B to the left hand side as well and now
24:49
I will lock off the frame and I will
24:53
I will lock off the frame and I will
24:53
I will lock off the frame and I will select this radius and I will go with
24:55
select this radius and I will go with
24:56
select this radius and I will go with the diameter option. I will give the
24:59
the diameter option. I will give the
24:59
the diameter option. I will give the diameter and then select the radius and
25:02
diameter and then select the radius and
25:02
diameter and then select the radius and from here I will go and insert center
25:05
from here I will go and insert center
25:05
from here I will go and insert center map. And we will uh select this
25:08
map. And we will uh select this
25:08
map. And we will uh select this horizontal line and this horizontal line
25:12
horizontal line and this horizontal line
25:12
horizontal line and this horizontal line and uh
25:15
and uh
25:15
and uh give it uh
25:18
give it uh
25:18
give it uh 25
25:20
25
25:20
25 and we will make it uh symmetric.
25:24
and we will make it uh symmetric.
25:24
and we will make it uh symmetric. Go to the format specification. I'll
25:26
Go to the format specification. I'll
25:26
Go to the format specification. I'll give the equal symbol on the both the
25:28
give the equal symbol on the both the
25:28
give the equal symbol on the both the side
25:30
side
25:30
side and
25:32
and
25:32
and then I will uh define this age from the
25:35
then I will uh define this age from the
25:36
then I will uh define this age from the center point.
25:43
So let's uh free update my value. Now
25:49
So let's uh free update my value. Now
25:49
So let's uh free update my value. Now I will uh select this vertical center
25:52
I will uh select this vertical center
25:52
I will uh select this vertical center line and this age.
26:08
So let's have some patience.
26:20
Now I will select this and this and here
26:24
Now I will select this and this and here
26:24
Now I will select this and this and here I will select the horizontal dimension.
26:26
I will select the horizontal dimension.
26:26
I will select the horizontal dimension. So which is of 36.
26:30
So which is of 36.
26:30
So which is of 36. So you can see that uh we have
26:33
So you can see that uh we have
26:33
So you can see that uh we have successfully created this uh shaft
26:36
successfully created this uh shaft
26:36
successfully created this uh shaft drawing and we have improvised this
26:39
drawing and we have improvised this
26:39
drawing and we have improvised this drawing. We have find out some errors to
26:42
drawing. We have find out some errors to
26:42
drawing. We have find out some errors to show it.
26:45
And now we will uh insert the isometric
26:48
And now we will uh insert the isometric
26:48
And now we will uh insert the isometric view. So to insert the isometric view I
26:51
view. So to insert the isometric view I
26:51
view. So to insert the isometric view I will uh switch to the isometric and from
26:55
will uh switch to the isometric and from
26:55
will uh switch to the isometric and from here I will set it to the fit all.
27:03
And now
27:07
I will switch to the tech draw
27:09
I will switch to the tech draw
27:09
I will switch to the tech draw workbench. And here you will see one
27:12
workbench. And here you will see one
27:12
workbench. And here you will see one camera icon. Click on it. Click on the
27:15
camera icon. Click on it. Click on the
27:16
camera icon. Click on it. Click on the crop image and say okay.
27:19
crop image and say okay.
27:19
crop image and say okay. And now go to the your page. So you can
27:21
And now go to the your page. So you can
27:21
And now go to the your page. So you can see that uh
27:23
see that uh
27:24
see that uh isometric view is inserted. Then now
27:27
isometric view is inserted. Then now
27:27
isometric view is inserted. Then now on the frame and uh
27:31
on the frame and uh
27:31
on the frame and uh move this isometric view.
27:34
move this isometric view.
27:34
move this isometric view. And now we will uh change the border
27:38
And now we will uh change the border
27:38
And now we will uh change the border which is more than required.
27:41
which is more than required.
27:41
which is more than required. So height it is 102. So let's make it
27:44
So height it is 102. So let's make it
27:44
So height it is 102. So let's make it 80.
27:47
80.
27:47
80. Let's uh make it 70.
27:50
Let's uh make it 70.
27:50
Let's uh make it 70. Let's uh make it uh 60.
27:55
And width let's make a 90.
28:03
So this is the isometric view we have
28:05
So this is the isometric view we have
28:05
So this is the isometric view we have inserted. And now we will uh do one more
28:09
inserted. And now we will uh do one more
28:09
inserted. And now we will uh do one more thing
28:11
thing
28:11
thing here. You can see the
28:13
here. You can see the
28:14
here. You can see the title block field. The red uh blue means
28:17
title block field. The red uh blue means
28:17
title block field. The red uh blue means that it is a editable field. And once
28:19
that it is a editable field. And once
28:19
that it is a editable field. And once you off the frame
28:21
you off the frame
28:22
you off the frame this uh blue horizontal line is get
28:25
this uh blue horizontal line is get
28:25
this uh blue horizontal line is get invisible which means that you cannot
28:27
invisible which means that you cannot
28:27
invisible which means that you cannot edit anything but when you on the frame
28:30
edit anything but when you on the frame
28:30
edit anything but when you on the frame you will be able to edit it. So now I
28:33
you will be able to edit it. So now I
28:33
you will be able to edit it. So now I will remove the create word technical
28:35
will remove the create word technical
28:35
will remove the create word technical drawing in frecad and this is a
28:38
drawing in frecad and this is a
28:38
drawing in frecad and this is a component type component drawing. So
28:41
component type component drawing. So
28:41
component type component drawing. So instead of a component I will uh
28:45
instead of a component I will uh
28:45
instead of a component I will uh give it a
28:48
give it a
28:48
give it a shaft drawing
28:51
shaft drawing
28:51
shaft drawing in preparation and uh created by I will
28:54
in preparation and uh created by I will
28:54
in preparation and uh created by I will insert my name Ramar Patel
28:57
insert my name Ramar Patel
28:58
insert my name Ramar Patel say okay and approve by
29:01
say okay and approve by
29:01
say okay and approve by Amar Patel
29:04
Amar Patel
29:04
Amar Patel and now here you can
29:08
and now here you can
29:08
and now here you can give the material give the journal
29:10
give the material give the journal
29:10
give the material give the journal tolerance type and scale. So scale we
29:12
tolerance type and scale. So scale we
29:12
tolerance type and scale. So scale we will say the NTS. NTS means not to
29:16
will say the NTS. NTS means not to
29:16
will say the NTS. NTS means not to scale. And here you can specify the
29:19
scale. And here you can specify the
29:19
scale. And here you can specify the general tolerance. Here is the date and
29:21
general tolerance. Here is the date and
29:21
general tolerance. Here is the date and language. And now here I will insert my
29:25
language. And now here I will insert my
29:25
language. And now here I will insert my logo. To insert the logo, go to the tech
29:28
logo. To insert the logo, go to the tech
29:28
logo. To insert the logo, go to the tech draw views and click on the insert bit
29:30
draw views and click on the insert bit
29:30
draw views and click on the insert bit map. And here I will uh
29:36
map. And here I will uh
29:36
map. And here I will uh go to the my existing projects and uh I
29:41
go to the my existing projects and uh I
29:41
go to the my existing projects and uh I will insert my logo
29:45
will insert my logo
29:45
will insert my logo and I will move it
29:49
to the
29:52
to the
29:52
to the title block field here. But here is a
29:55
title block field here. But here is a
29:55
title block field here. But here is a space is less and our logo is large. So
29:59
space is less and our logo is large. So
29:59
space is less and our logo is large. So we will uh click on the image and here
30:02
we will uh click on the image and here
30:02
we will uh click on the image and here is a scale. So scale I will give it 0 4.
30:06
is a scale. So scale I will give it 0 4.
30:06
is a scale. So scale I will give it 0 4. So in 4 it will easily fit here.
30:12
So in 4 it will easily fit here.
30:12
So in 4 it will easily fit here. And now I will off the frame.
30:16
And now I will off the frame.
30:16
And now I will off the frame. So this is how we have successfully
30:19
So this is how we have successfully
30:19
So this is how we have successfully created the technical drawing of a
30:21
created the technical drawing of a
30:21
created the technical drawing of a shaft. And let's save it.
30:26
shaft. And let's save it.
30:26
shaft. And let's save it. So this is uh all about this tutorial
30:29
So this is uh all about this tutorial
30:29
So this is uh all about this tutorial how to use the tech drawup pens to
30:32
how to use the tech drawup pens to
30:32
how to use the tech drawup pens to create a technical drawing in a free
30:34
create a technical drawing in a free
30:34
create a technical drawing in a free CAD. Thank you for watching and thank
30:37
CAD. Thank you for watching and thank
30:37
CAD. Thank you for watching and thank you for your valuable time.
30:40
you for your valuable time.
30:40
you for your valuable time. [Music]
30:53
Heat. Heat.
30:57
[Music]