0:00
if you see the lightning bolt symbol on
0:01
your Dodge Ram it means there's a
0:03
problem with the electronic throttle
0:05
control Etc system the ETC system uses
0:08
different sensors like the throttle
0:10
position sensor accelerator pedal
0:12
position sensor and the map sensor
0:14
manifold absolute pressure If you see
0:16
the lightning bolt symbol warning light
0:18
on your Dodge Ram along with stalling
0:21
RPM changes and acceleration problems
0:23
there's a high possibility it can be due
0:25
to an issue with the accelerator pedal
0:27
position sensor apps to fix the problem
0:31
replace the faulty accelerator pedal
0:33
position sensor APS accessing the aps is
0:36
quite simple just remove the inner
0:38
Fender Splash Shield under the battery
0:40
tray next is throttle body malfunctions
0:43
this is common and everyone knows it
0:45
start by cleaning the inside of the
0:47
throttle body using a solvent-like
0:48
carburetor cleaner if cleaning isn't
0:50
enough or the throttle body is found to
0:52
be faulty replacement becomes necessary
0:55
well low or damages battery can cause
0:57
this error too utilize a voltmeter to
0:59
check check the battery voltage with the
1:01
Keyon you should see around 12.6 volts
1:04
if the voltage drops below 10 volts
1:06
while trying to start the engine
1:08
especially in the crank position it
1:10
signals a low battery but if you
1:12
discover the battery is too old or
1:14
damaged I recommend replacing the
1:16
battery for a reliable solution finally
1:18
TPMS tire pressure monitoring system
1:21
sensor is another possible reason to
1:23
popping up the lightning bolt symbol
1:25
warning light in your Dodge Ram to
1:27
tackle this problem start by checking
1:29
the T TPMS for any visible damage or
1:31
problems if the TPMS sensors are not
1:34
working properly you might have to
1:36
replace them thanks for watching I am
1:38
not asking for any subscription still if
1:41
you do subscribe that means you also
1:43
have helping heart cheers
