https://open.video/@cadland/v/draw-an-ellipse-in-autocad-with-ellipse-cadland-architecture-autocadblocks Draw an Ellipse in AutoCAD with ELLIPSE cadland architecture autocadblocks Drawing three circles, then LINE and FILLET, just to fake an ellipse in AutoCAD? ELLIPSE builds the real curve in one command. In this video we try circles and fillet first, then draw the same shape with ELLIPSE. Learn: circles plus LINE plus FILLET, ELLIPSE center, first axis, second axis. Manual: CIRCLE, CIRCLE, CIRCLE, LINE, FILLET Faster: ELLIPSE, center, axis, axis This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/QfqUcrrGxd3q/hq3GR0xZOs2_cEfBfj.jpg https://streaming.open.video/contents/QfqUcrrGxd3q/1791114448/index.m3u8 https://open.video/embed?contentId=hq3GR0xZOs2 35 https://open.video/@cadland/v/use-dynamic-input-in-autocad-with-f12 Use Dynamic Input in AutoCAD with F12 Still looking down at the command line just to type a length in AutoCAD? F12 turns Dynamic Input on. Length and angle sit at the cursor while you draw. In this video we draw with F12 off first, then press F12 and draw the same square at the cursor. Learn: F12 off, command line only, F12 on, values at the cursor. Manual: F12 off, watch the command line Faster: F12, type at the cursor This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/kbiwBvvG3xFy/hWxqR02ZPd2_peoHSh.jpg https://streaming.open.video/contents/kbiwBvvG3xFy/1791114448/index.m3u8 https://open.video/embed?contentId=hWxqR02ZPd2 35 https://open.video/@cadland/v/draw-a-donut-in-autocad-with-donut-cadland-architecture-autocadblocks Draw a Donut in AutoCAD with DONUT cadland architecture autocadblocks Drawing two circles just to get a ring in AutoCAD? DONUT asks for inner diameter 10 and outer diameter 12, then you click to place. In this video we draw CIRCLE radius 5 and CIRCLE radius 6 first, then the same ring with DONUT. Learn: two nested circles, DONUT, inner 10, outer 12, click to place. Manual: CIRCLE 5, CIRCLE 6 Faster: DONUT, 10, 12, place This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/nrCEkf15Yhur/NGxHle2YOc2_AmmOFN.jpg https://streaming.open.video/contents/nrCEkf15Yhur/1791114447/index.m3u8 https://open.video/embed?contentId=NGxHle2YOc2 23 https://open.video/@cadland/v/make-a-3d-bowl-in-autocad-with-revolve-architecture-autocadblocks-cadland Make a 3D Bowl in AutoCAD with REVOLVE architecture autocadblocks cadland Need a 3D bowl in AutoCAD from a 2D profile? REVOLVE spins the profile around an axis and the bowl is one solid. In this video we draw a half-section, then REVOLVE it 360 degrees. Learn: draw the profile, REVOLVE, pick the axis, 360. Steps: profile, REVOLVE, axis, 360 This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/ofCkwbHGYFDr/NH2Wlexdjc2_blPUZQ.jpg https://streaming.open.video/contents/ofCkwbHGYFDr/1791114447/index.m3u8 https://open.video/embed?contentId=NH2Wlexdjc2 30 https://open.video/@cadland/v/make-a-3d-wedge-in-autocad-with-wedge-architecture-cadland-autocad Make a 3D Wedge in AutoCAD with WEDGE architecture cadland autocad Drawing a right triangle and PRESSPULL just to get a wedge in AutoCAD? WEDGE builds the solid in one command. In this video we draw a triangle and PRESSPULL first, then make the same solid with WEDGE. Learn: right triangle plus PRESSPULL, WEDGE first corner, opposite corner, height. Manual: LINE a triangle, PRESSPULL Faster: WEDGE, corner, corner, height This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/SWickdXG3d87/Nrwakf2tjs2_uRjVMZ.jpg https://streaming.open.video/contents/SWickdXG3d87/1791114571/index.m3u8 https://open.video/embed?contentId=Nrwakf2tjs2 27 https://open.video/@cadland/v/make-a-3d-ring-in-autocad-with-torus Make a 3D Ring in AutoCAD with TORUS Sweeping two circles just to get a 3D ring in AutoCAD? TORUS builds the ring in one command. In this video we try a big circle plus a small circle with SWEEP, then make the same ring with TORUS. Learn: two circles and SWEEP, TORUS center, torus radius, tube radius. Manual: CIRCLE, CIRCLE, SWEEP Faster: TORUS, center, two radii This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/UhvgcrWGBhTs/MrxblL2diZ2_hOSZDf.jpg https://streaming.open.video/contents/UhvgcrWGBhTs/1791114698/index.m3u8 https://open.video/embed?contentId=MrxblL2diZ2 22 https://open.video/@cadland/v/rotate-any-autocad-object-without-measuring-the-angle Rotate Any AutoCAD Object Without Measuring the Angle Rotating an AutoCAD object by eye may look correct, but even a small angle error can cause alignment problems later. Instead of guessing the rotation angle, use the Reference option inside ROTATE. Select two points on the objects straight edge to define its current direction, then enter the exact target angle. Command sequence: ROTATE Select Object Base Point Reference Pick Two Points Enter 0 Entering 0 makes the selected reference edge horizontal and parallel to the X-axis. This method removes visual guesswork and works even when the objects original angle is unknown. Important: Choose both reference points on the same straight edge. Incorrect reference points will create an incorrect rotation. Subscribe to CAD LAND for precise AutoCAD workflows without unnecessary trial and error. AutoCAD ROTATE AutoCADReference CADTips CADLand https://video-meta.open.video/poster/inyYxrXGxFos/NG2WkfwdiZ2_XQMiwU.jpg https://streaming.open.video/contents/inyYxrXGxFos/1791114946/index.m3u8 https://open.video/embed?contentId=NG2WkfwdiZ2 21 https://open.video/@cadland/v/stop-dragging-autocad-dimensions-one-by-one Stop Dragging AutoCAD Dimensions One by One Still dragging overlapping AutoCAD dimensions one by one and trying to make the spacing look equal? Stop estimating the gaps. DIMSPACE automatically arranges parallel dimensions using an equal spacing value or Auto spacing based on the dimension text height. Command sequence: DIMSPACE Select Base Dimension Select Remaining Dimensions Enter Auto ( Or Every Number You Need ) You can also enter a specific spacing distance when the drawing requires a fixed standard. Important: The selected dimensions must be parallel linear dimensions of the same type, or angular dimensions sharing a common vertex. Use a spacing value of 0 if you want the selected dimension lines to align instead of being separated. Subscribe to CAD LAND for practical AutoCAD shortcuts that remove unnecessary drafting work. AutoCAD DIMSPACE AutoCADDimensions CADTips CADLand https://video-meta.open.video/poster/Unu2ldH4YBe4/Na2Gl1wtjI2_SwBxCs.jpg https://streaming.open.video/contents/Unu2ldH4YBe4/1791114946/index.m3u8 https://open.video/embed?contentId=Na2Gl1wtjI2 17 https://open.video/@cadland/v/stop-guessing-line-lengths-in-autocad Stop Guessing Line Lengths in AutoCAD Still dragging AutoCAD endpoints and hoping the line reaches the exact length? Stop estimating. The Total option inside LENGTHEN sets the final length directly while keeping the line angle and opposite endpoint unchanged. Example: Current Length: 543 Target Length: 800 Command sequence: LENGTHEN Total 800 Select the Endpoint to Move The endpoint closest to your selection moves. The opposite endpoint remains fixed. LENGTHEN works on open objects such as lines, arcs, and open polylines. It does not modify closed objects. Subscribe to CAD LAND for practical AutoCAD shortcuts that remove unnecessary drafting steps. AutoCAD LENGTHEN CADTips AutoCADShortcuts CADLand https://video-meta.open.video/poster/VBycgfLHwFTz/hG2bQvwdjZ2_SiOCEr.jpg https://streaming.open.video/contents/VBycgfLHwFTz/1791114946/index.m3u8 https://open.video/embed?contentId=hG2bQvwdjZ2 19 https://open.video/@cadland/v/set-any-autocad-layer-current-without-searching-the-list Set Any AutoCAD Layer Current Without Searching the List Stop scrolling through long AutoCAD layer lists just to find the layer you need. Use the LAYMCUR command and select an existing object. AutoCAD instantly makes that objects layer the current layer. Command sequence: LAYMCUR Select Object Any new object you create will now be placed on the selected objects layer. This is a simple but useful shortcut for drawings containing dozens or hundreds of layers. Subscribe to CAD LAND for practical AutoCAD commands and workflow shortcuts. AutoCAD LAYMCUR AutoCADLayers CADTips CADLand https://video-meta.open.video/poster/izqYktuPspmq/ha3qk0xtiZ2_DanjsM.jpg https://streaming.open.video/contents/izqYktuPspmq/1791114947/index.m3u8 https://open.video/embed?contentId=ha3qk0xtiZ2 22 https://open.video/@cadland/v/autocad-lesson-1-the-right-way-to-use-line-delete AutoCAD Lesson 1: The Right Way to Use Line & Delete The absolute basics of AutoCAD: How to draw perfect lines and delete them instantly using shortcuts. Stop clicking icons and start using commands. Subscribe for daily CAD tips and master AutoCAD step-by-step! AutoCAD CADLand 3DModeling Drafting Engineering CADShortcuts CAD https://video-meta.open.video/poster/iFmshhv5ZBS4/hGxqlu2tiJ2_MrenWI.jpg https://streaming.open.video/contents/iFmshhv5ZBS4/1791114948/index.m3u8 https://open.video/embed?contentId=hGxqlu2tiJ2 14 https://open.video/@cadland/v/place-autocad-doors-and-windows-faster-with-yqarch Place AutoCAD Doors and Windows Faster with YQArch Place AutoCAD doors and windows directly on architectural walls using the YQArch plugin. In this video, the drawing units, opening widths, pier distances, and placement settings were configured before recording. The required door and window styles are selected from the YQArch style libraries and placed directly on the prepared walls. Door workflow: YQArch AD Choose Door Style Select Wall Choose Position and Opening Direction Window workflow: YQArch WD Choose Window Style Select Wall Choose Position The AD command is used to select and place door styles on walls. The WD command provides the same type of workflow for window styles. This is a YQArch plugin workflow, not a native AutoCAD command. Door and window styles, dialog boxes, command prompts, and placement options may vary depending on the installed YQArch version and language settings. This video uses: AutoCAD 2021 Drawing Unit: Centimeters YQArch Plugin YQArch official information and download page: http://yqarch.cn/yqarch.asp The official page provides YQArch 6.7.4 downloads, installation information, command documentation, and compatibility details. Always verify the downloaded file, AutoCAD version compatibility, plugin language, and drawing units before using it on a project. Subscribe to CAD LAND for practical AutoCAD and YQArch architectural workflows. AutoCAD YQArch AutoCADDoor AutoCADWindow Architecture CADLand https://video-meta.open.video/poster/jlqQdrbG3xoX/NX3alvxcjJ2_sIGWIR.jpg https://streaming.open.video/contents/jlqQdrbG3xoX/1791114949/index.m3u8 https://open.video/embed?contentId=NX3alvxcjJ2 24 https://open.video/@cadland/v/stop-trimming-autocad-lines-one-by-one Stop Trimming AutoCAD Lines One by One Still clicking every unwanted AutoCAD line segment one by one? TRIM has a faster Quick Mode. Press and drag across multiple unwanted segments to trim them in a single freehand selection instead of selecting every piece individually. Command sequence: TRIM Quick Mode Press and Drag Across Unwanted Segments In Quick Mode, all drawing objects automatically act as potential cutting edges. Important: Only swipe across the geometry you want to remove. Objects that cannot be trimmed may be deleted when selected in Quick Mode. Use this method for grids, floor plans, structural layouts, details, and drawings containing many intersecting lines. Subscribe to CAD LAND for practical AutoCAD shortcuts that remove repetitive drafting work. AutoCAD TRIM AutoCADTips CADShortcuts CADLand https://video-meta.open.video/poster/mQigxdWGtxhr/NbxGku2diI2_soyjRX.jpg https://streaming.open.video/contents/mQigxdWGtxhr/1791115075/index.m3u8 https://open.video/embed?contentId=NbxGku2diI2 23 https://open.video/@cadland/v/make-autocad-text-follow-any-arc Make AutoCAD Text Follow Any Arc Still rotating individual letters manually to place text along a curved path in AutoCAD? Use the ARCTEXT command to create editable text that automatically follows a selected arc. You can control: Text height Character spacing Text direction Arc offset Left and right offsets Font and text style Command sequence: ARCTEXT Select Arc Enter Text Adjust Settings Update to AutoCAD Use this command for curved labels, signs, logos, circular details, site plans, and technical annotations. Subscribe to CAD LAND for practical AutoCAD commands and workflow shortcuts. AutoCAD ARCTEXT AutoCADText CADTips CADLand https://video-meta.open.video/poster/S6iAhr05xtLZ/NbxXluxcjZ2_hrBBJe.jpg https://streaming.open.video/contents/S6iAhr05xtLZ/1791115081/index.m3u8 https://open.video/embed?contentId=NbxXluxcjZ2 25 https://open.video/@cadland/v/how-to-use-tcount-in-autocad-automatic-text-numbering How to Use TCOUNT in AutoCAD Automatic Text Numbering Still numbering parking spaces one-by-one in AutoCAD? The TCOUNT command adds sequential numbers to multiple text objects automatically. Because these parking spaces are arranged in two horizontal rows, the rows are numbered separately from left to right. Bottom row: TCOUNT Select Bottom Row X 1,1 Suffix Top row: TCOUNT Select Top Row X Continue From the Next Number Suffix For example, if the bottom row ends at P-5, start the top row with 6,1. TCOUNT is an Express Tool. Check that it is available in your AutoCAD installation before recording. Subscribe to CAD LAND for practical AutoCAD commands and workflow shortcuts. AutoCAD TCOUNT CADTips AutoCADShorts CADLand AutoCAD TCOUNT CADTips AutoCADShorts CADLand https://video-meta.open.video/poster/T4CEEt1G2hLA/NbxXRv2tjI2_bEvpGW.jpg https://streaming.open.video/contents/T4CEEt1G2hLA/1791115082/index.m3u8 https://open.video/embed?contentId=NbxXRv2tjI2 24 https://open.video/@cadland/v/stop-deleting-overlapping-lines-manually Stop Deleting Overlapping Lines Manually! Are you still manually moving lines to see if there are duplicates hidden underneath them in AutoCAD? Stop wasting your time with messy, bloated drawings that print too thick. The OVERKILL (OV) command is a legendary cleanup tool. By simply selecting your entire drawing, running OVERKILL, and hitting OK, AutoCAD automatically vaporizes all overlapping lines, duplicates, and redundant vertices instantly. Work smart, draft fast. Did you run Overkill on your drawing today? Comment below! Subscribe to CAD Land for daily professional AutoCAD hacks. AutoCAD CADLand CADShortcuts OverkillCommand CADCleanup Drafting Engineering Architecture CADTips Productivity Workflow https://video-meta.open.video/poster/p6i-xxq5ZpNt/hXwaluxZiY2_PWWqMR.jpg https://streaming.open.video/contents/p6i-xxq5ZpNt/1791115075/index.m3u8 https://open.video/embed?contentId=hXwaluxZiY2 23 https://open.video/@cadland/v/find-area-in-autocad-with-area Find Area in AutoCAD with AREA Clicking every corner just to get an area in AutoCAD? JOIN the lines into one polyline, then AREA picks the whole shape in one click. In this video we click the corners first, then JOIN and AREA on the L shape. Learn: click corner by corner, JOIN into one polyline, AREA, Enter, Enter, select the line. Manual: AREA, click each corner, close Faster: JOIN, AREA, Enter, Enter, select This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/S6CwcbHPthK5/hbwGRuxcPJ2_RUqdzs.jpg https://streaming.open.video/contents/S6CwcbHPthK5/1791115084/index.m3u8 https://open.video/embed?contentId=hbwGRuxcPJ2 20 https://open.video/@cadland/v/give-walls-thickness-in-autocad-with-yqarch-xxd Give Walls Thickness in AutoCAD with YQArch XXD Offsetting every wall line one by one in AutoCAD? YQArch XXD turns single lines into double lines, so the whole plan gets wall thickness in one go. In this video we offset a few lines by hand, then run XXD on the plan. Learn: OFFSET one line at a time, XXD, single lines become walls. Manual: OFFSET, pick a line, repeat Faster: XXD, select the lines, thickness YQArch is a plugin, not a native AutoCAD command. The interface and available options may vary depending on your installed version, language, selected style, and unit configuration. Always verify the final result before saving your project. This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/O4yQAxaX3hLt/Nb2qQv2sPY2_rZnbET.jpg https://streaming.open.video/contents/O4yQAxaX3hLt/1791115087/index.m3u8 https://open.video/embed?contentId=Nb2qQv2sPY2 26 https://open.video/@cadland/v/make-a-3d-sphere-in-autocad-with-sphere Make a 3D Sphere in AutoCAD with SPHERE Want a 3D ball in AutoCAD in one command? SPHERE builds a solid from a center and a radius. In this video we type SPHERE, click the center, drag the radius, then orbit the ball. Learn: type SPHERE, pick the center, set the radius, orbit the solid. Draw: SPHERE, center, radius This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/SQeUcbK5ZlK6/hb2Xl0wcPY2_zQqGRU.jpg https://streaming.open.video/contents/SQeUcbK5ZlK6/1791115082/index.m3u8 https://open.video/embed?contentId=hb2Xl0wcPY2 34 https://open.video/@cadland/v/make-a-3d-pyramid-in-autocad-with-pyramid Make a 3D Pyramid in AutoCAD with PYRAMID Drawing a pyramid by hand in AutoCAD? Rectangle, a center line, then join every corner. PYRAMID builds the solid in one command. In this video we draw it by hand first, then make the same pyramid with PYRAMID. Learn: rectangle plus a line plus corner joins, PYRAMID base, height. Manual: RECTANGLE, LINE, join the corners Faster: PYRAMID, base, height This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/O6estdL53dft/NrwbRf2dOY2_COabID.jpg https://streaming.open.video/contents/O6estdL53dft/1791115081/index.m3u8 https://open.video/embed?contentId=NrwbRf2dOY2 26 https://open.video/@cadland/v/curve-objects-in-autocad-with-yqarch-tf Curve Objects in AutoCAD with YQArch TF Need a curtain wave or a curved interior in AutoCAD? YQArch TF transforms a selected object into a curve shape in one go. In this video we run TF on the interior and the straight pieces become the room curves. Learn: type TF, pick the type, select the object, apply on the shape. Draw: TF, select type, select object, apply YQArch is a plugin, not a native AutoCAD command. The interface and available options may vary depending on your installed version, language, selected style, and unit configuration. Always verify the final result before saving your project. This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/iSyAFdL53FeB/NbxaQvxsOZ2_PuVEsc.jpg https://streaming.open.video/contents/iSyAFdL53FeB/1791115083/index.m3u8 https://open.video/embed?contentId=NbxaQvxsOZ2 49 https://open.video/@cadland/v/join-a-3d-chair-into-one-solid-with-union Join a 3D Chair into One Solid with UNION Chair falls apart when you move it in AutoCAD? UNION joins solids into one. In this video we union the 6 BOX chair into a single solid, then move it as one. Learn: why 6 boxes move separately, how UNION joins them, and how the whole chair moves together. Manual: MOVE the seat, legs stay behind Faster: UNION, select 6 solids, one chair, MOVE This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/PVbwwhf4Zt2z/oa2XQf2Yid2_qYAFTF.jpg https://streaming.open.video/contents/PVbwwhf4Zt2z/1791115211/index.m3u8 https://open.video/embed?contentId=oa2XQf2Yid2 25 https://open.video/@cadland/v/dimension-every-wall-of-a-closed-plan-at-once-with-yqarch-ddzz Dimension Every Wall of a Closed Plan at Once with YQArch DDZZ Still placing a dimension on every wall of a closed plan one by one? The YQArch DDZZ (Dim Closed PLine) command reads a closed polyline like a room or wall loop and places all its dimensions automatically in a single pick. In this video we also use DDSS (Dim PLine/Lines) and DDWW (Dim of Walls) from the same YQArch dimension family. In this video, youll learn: How to draw a simple closed wall plan (wall thickness 20 cm) How to dimension every wall manually, one by one How to select the closed polyline and let YQArch place every dimension at once How alignment controls where the dimensions sit Manual workflow: Draw Wall DIMLINEAR Adjust Repeat for every wall Faster workflow: YQArch DDZZ Select Closed PLine All Dimensions Placed This video uses AutoCAD 2021 with centimeters as the drawing unit. YQArch is a plugin, not a native AutoCAD command. The interface and available options may vary depending on your installed version, language, selected style, and unit configuration. Always verify every dimension value before saving your project. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/l7DAwte4Zx_6/oawHRK3Jic2_PyelAW.jpg https://streaming.open.video/contents/l7DAwte4Zx_6/1791115210/index.m3u8 https://open.video/embed?contentId=oawHRK3Jic2 26 https://open.video/@cadland/v/stop-extending-autocad-lines-one-by-one Stop Extending AutoCAD Lines One by One Still clicking every AutoCAD line separately just to extend them to the same boundary? EXTEND has a faster Quick Mode. Press and drag across multiple line endpoints to extend them in one freehand selection instead of selecting every object individually. Command sequence: EXTEND Quick Mode Press and Drag Across the Endpoints In Quick Mode, every suitable object automatically acts as a potential boundary. Important: Keep the drawing simple when demonstrating this method. If multiple boundaries are available, AutoCAD may extend an object to a different eligible edge. Use this workflow for grids, structural lines, floor plans, details, and repetitive drafting geometry. Subscribe to CAD LAND for practical AutoCAD workflows that eliminate repetitive clicks. AutoCAD EXTEND AutoCADTips CADShortcuts CADLand https://video-meta.open.video/poster/SRnoEtLXwF-s/UW2WQu3cPc2_qJlICO.jpg https://streaming.open.video/contents/SRnoEtLXwF-s/1791115213/index.m3u8 https://open.video/embed?contentId=UW2WQu3cPc2 26 https://open.video/@cadland/v/how-to-select-100-similar-blocks-in-1-second-autocad-hack How to Select 100 Similar Blocks in 1 Second (AutoCAD Hack) Are you still panning around your screen and manually clicking dozens of scattered blocks or circles one-by-one in AutoCAD? Stop wasting your clicks and risking mis-selection. The SELECTSIMILAR command is an absolute lifesaver. By simply selecting just ONE object, right-clicking, and hitting Select Similar, AutoCAD automatically analyzes your entire workspace and highlights every matching block or geometry instantly. Work smart, draft fast. Did this command save your clicks today? Comment below! Subscribe to CAD Land for daily professional AutoCAD hacks. AutoCAD CADLand CADShortcuts SelectSimilar BulkSelection Drafting Engineering Architecture CADTips Productivity Workflow https://video-meta.open.video/poster/Q_ngotLP3d1s/UawWl02sPs2_JGZCBk.jpg https://streaming.open.video/contents/Q_ngotLP3d1s/1791115210/index.m3u8 https://open.video/embed?contentId=UawWl02sPs2 24 https://open.video/@cadland/v/the-most-satisfying-autocad-command-you-dont-use The Most Satisfying AutoCAD Command You Dont Use Stop wasting your time using the standard TRIM command to cut dozens of lines crossing your drawing borders or circular boundaries. The EXTRIM (Express Trim) command is a hidden AutoCAD gem. It allows you to select a boundary object (like a circle, rectangle, or polyline) and instantly trim all intersecting lines inside or outside of it with just one single click. Its fast, precise, and incredibly satisfying. Did you know about the EXTRIM command? Comment YES or NO! Subscribe to CAD Land for daily professional drafting hacks. AutoCAD CADLand CADShortcuts ExtrimCommand Drafting Engineering Architecture CADTips Satisfying https://video-meta.open.video/poster/nRnwgvuGspD5/oawblf3sPs2_rIRztd.jpg https://streaming.open.video/contents/nRnwgvuGspD5/1791115211/index.m3u8 https://open.video/embed?contentId=oawblf3sPs2 26 https://open.video/@cadland/v/make-a-3d-cone-in-autocad-with-cone Make a 3D Cone in AutoCAD with CONE Lofting two circles and a line just to get a cone in AutoCAD? CONE builds it in one command. In this video we try a big circle, a center line, and a tiny circle with LOFT, then make the same solid with CONE. Learn: two circles plus a line and LOFT, CONE center, radius, height. Manual: CIRCLE, LINE, CIRCLE, LOFT Faster: CONE, center, radius, height This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/TVvkkbGWxhDt/oq3aQewJPd2_JBggRi.jpg https://streaming.open.video/contents/TVvkkbGWxhDt/1791115214/index.m3u8 https://open.video/embed?contentId=oq3aQewJPd2 28 https://open.video/@cadland/v/yqarch-xf-erase-wall-inside-door-opening-in-autocad-fast YQArch XF: Erase Wall Inside Door Opening in AutoCAD (Fast) Still trimming the wall that pokes into your door opening by hand? The YQArch XF command erases the wall segment that enters a door or window opening in one click no manual TRIM, no picking cutting edges. In this video we clean a 90 cm door in a 20 cm wall. In this video, youll learn: How to draw a wall (20 cm) with a door opening (90 cm) How to remove the intruding wall manually with TRIM, one edge at a time How to use YQArch XF to erase the wall inside the door at once How the opening stays clean and connected Manual workflow: Select Cutting Edges TRIM Repeat for every opening Faster workflow: YQArch XF Select Door Wall Erased This video uses AutoCAD 2021 with centimeters as the drawing unit. YQArch is a plugin, not a native AutoCAD command. The interface and available options may vary depending on your installed version, language, selected style, and unit configuration. Always verify the final opening before saving your project. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD yqarchxf erasewallautocad cleardooropening CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/ojzEhheO7FwY/obxqkvwYjs2_MEBfIZ.jpg https://streaming.open.video/contents/ojzEhheO7FwY/1791115343/index.m3u8 https://open.video/embed?contentId=obxqkvwYjs2 28 https://open.video/@cadland/v/isolate-selected-objects-in-autocad-with-isolateobjects Isolate Selected Objects in AutoCAD with ISOLATEOBJECTS Still hiding layers one by one just to focus on a few objects? The AutoCAD ISOLATEOBJECTS command hides everything except the objects you select no layer gymnastics, no affecting whole layers. In this video we isolate a few elements in a busy plan. In this video, youll learn: How to select the objects you want to keep visible How to hide objects manually by freezing layers one by one How to use ISOLATEOBJECTS to hide everything else in one step How to bring everything back with UNISOLATEOBJECTS Manual workflow: Select Objects Freeze Layers One by One Repeat Faster workflow: AutoCAD ISOLATEOBJECTS Select Only Selected Stay Visible This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/RkrMgdvOAF1Y/oXxqlLxYjd2_wtEQFz.jpg https://streaming.open.video/contents/RkrMgdvOAF1Y/1791115340/index.m3u8 https://open.video/embed?contentId=oXxqlLxYjd2 27 https://open.video/@cadland/v/stop-fixing-every-autocad-offset-corner-manually Stop Fixing Every AutoCAD Offset Corner Manually Are you offsetting separate AutoCAD lines and fixing every disconnected corner manually with FILLET? The problem is the original shape. If the boundary is made from separate line objects, each line is offset independently. Use JOIN first to convert the touching and coplanar segments into one polyline. Then run OFFSET once to create a clean connected boundary. Slow method: OFFSET Each Line FILLET Every Corner Fast method: JOIN All Segments OFFSET Once Important: The original segments must be coplanar and their endpoints must touch. Subscribe to CAD LAND for practical AutoCAD commands and workflow shortcuts. AutoCAD JOIN OFFSET Polyline CADLand https://video-meta.open.video/poster/VAfMkvX56xCs/ob3aRK3Jjd2_SGCMMU.jpg https://streaming.open.video/contents/VAfMkvX56xCs/1791115340/index.m3u8 https://open.video/embed?contentId=ob3aRK3Jjd2 28 https://open.video/@cadland/v/how-autocad-professionals-dimension-plans-in-1-second How AutoCAD Professionals Dimension Plans in 1 Second Are you still clicking start and end points manually to dimension every single wall, column, or line in AutoCAD? You are losing valuable time on drafting. The QDIM (Quick Dimension) command is a built-in game-changerno plugins or LISPs required. By simply selecting all your geometry with a single window and running QDIM, AutoCAD automatically generates perfectly aligned, mathematical dimensions for every object instantly. How do you dimension your drawings? Comment MANUAL or QDIM! Subscribe to CAD Land for daily professional drafting workflows. AutoCAD CADLand CADShortcuts QdimCommand Dimensioning Drafting Engineering Architecture CADTips Design https://video-meta.open.video/poster/jAD2tx05FB3r/Ub3XkexcOs2_zVmzrV.jpg https://streaming.open.video/contents/jAD2tx05FB3r/1791115340/index.m3u8 https://open.video/embed?contentId=Ub3XkexcOs2 27 https://open.video/@cadland/v/stop-copying-lines-manually-in-autocad-offset-hack Stop Copying Lines Manually in AutoCAD! (Offset Hack) Stop drawing parallel lines or walls manually in AutoCAD. The OFFSET (O) command is the absolute fastest way to create concentric circles, parallel curves, and wall thicknesses instantly. In this quick tutorial, you will learn how to use the Offset tool like a professional CAD drafter to save hours on your blueprints and technical drawings. Comment OFFSET if this saved you time today! Subscribe to CAD Land for daily CAD hacks. AutoCAD CADLand CADShortcuts OffsetCommand Drafting Engineering 3DModeling https://video-meta.open.video/poster/jAjggraW6p_7/oXxbQ03sPc2_RsPumv.jpg https://streaming.open.video/contents/jAjggraW6p_7/1791115340/index.m3u8 https://open.video/embed?contentId=oXxbQ03sPc2 27 https://open.video/@cadland/v/make-a-3d-spring-in-autocad-with-sweep Make a 3D Spring in AutoCAD with SWEEP Want a 3D spring in AutoCAD from one profile? SWEEP takes a circle along a helix and builds the spring in one go. In this video we draw the circle, draw the helix, then sweep the profile along the path. Learn: circle as profile, helix as path, SWEEP along the path, orbit the spring. Draw: CIRCLE, HELIX Then: SWEEP, profile, path This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/QJnEgvOO3dgz/gi3qk12cOY2_BQWoUl.jpg https://streaming.open.video/contents/QJnEgvOO3dgz/1791116814/index.m3u8 https://open.video/embed?contentId=gi3qk12cOY2 32 https://open.video/@cadland/v/quick-dimension-a-profile-in-autocad-with-qdim Quick Dimension a Profile in AutoCAD with QDIM Dimensioning every side one by one in AutoCAD? QDIM dimensions the selected objects in one go. In this video we QDIM a stepped profile, then hold Shift and click to drop a line from the selection. Learn: DIM one side at a time, QDIM the whole profile, Shift click to unselect, dimension only what you keep. Manual: DIM, click a side, repeat Faster: QDIM, select, Shift click to drop, Enter This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/QXbstdDPZtUs/gixXlvxcPJ2_SGoibo.jpg https://streaming.open.video/contents/QXbstdDPZtUs/1791116814/index.m3u8 https://open.video/embed?contentId=gixXlvxcPJ2 36 https://open.video/@cadland/v/draw-a-gear-in-autocad-with-array Draw a Gear in AutoCAD with ARRAY Drawing every gear tooth one by one in AutoCAD? ARRAY Polar places 18 teeth in 360 degrees from one circle. In this video we array one tooth around the center, then trim the gear. Learn: draw the outer circle and one tooth, pick the center, set 18 items, trim the outline. Manual: CIRCLE, copy around, repeat x18 Faster: ARRAY Polar, 18 items, 360 degrees, TRIM This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/lXrAEtO5xxo4/M4xXkv2dOZ2_RxHLFY.jpg https://streaming.open.video/contents/lXrAEtO5xxo4/1791116815/index.m3u8 https://open.video/embed?contentId=M4xXkv2dOZ2 40 https://open.video/@cadland/v/draw-a-10-arm-rotor-in-autocad-with-array Draw a 10-Arm Rotor in AutoCAD with ARRAY Copying every arm around a circle in AutoCAD? ARRAY Polar places 10 arms in 360 degrees from one drawing. In this video we array one arm around the center to build the rotor. Learn: draw one arm, pick the center, set 10 items, fill the circle. Manual: ROTATE copy, nine times Faster: ARRAY Polar, 10 items, 360 degrees This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/OsjUdhD4_lhZ/MixrRL3dOZ2_ytXOjp.jpg https://streaming.open.video/contents/OsjUdhD4_lhZ/1791116940/index.m3u8 https://open.video/embed?contentId=MixrRL3dOZ2 46 https://open.video/@cadland/v/make-a-3d-chair-in-autocad-with-box-only Make a 3D Chair in AutoCAD with BOX Only Can you model a 3D chair in AutoCAD with one command? BOX only. In this video we build a chair from six solids: one seat, four legs, one back. Learn: how BOX makes every part, how to stack the seat on the legs, and how the back sits on the seat. Manual: rectangle then EXTRUDE, six times Faster: BOX only, six solids, chair done This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/Rcb6wbSOExer/gi2XQ1wZOJ2_YXAkKw.jpg https://streaming.open.video/contents/Rcb6wbSOExer/1791116939/index.m3u8 https://open.video/embed?contentId=gi2XQ1wZOJ2 32 https://open.video/@cadland/v/cut-a-3d-door-opening-in-autocad-with-subtract Cut a 3D Door Opening in AutoCAD with SUBTRACT Need a door opening in a 3D wall in AutoCAD? SUBTRACT cuts one solid from another. In this video we subtract a 90 x 210 cm door from a 20 cm wall. Learn: why overlapping solids leave no hole, how SUBTRACT keeps one wall, and how the opening appears in 3D. Manual: BOX the wall, BOX the door, overlap, no opening Faster: SUBTRACT, select the wall, select the door, opening cut This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/ncD6txCWFBm5/MPwHlu2tiZ2_RuWpax.jpg https://streaming.open.video/contents/ncD6txCWFBm5/1791116939/index.m3u8 https://open.video/embed?contentId=MPwHlu2tiZ2 37 https://open.video/@cadland/v/make-a-3d-table-in-autocad Make a 3D Table in AutoCAD Modeling a simple 3D table in AutoCAD? In this video we build a solid table: one top, four legs. Quiet modeling, no on-screen text. This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/pUrggBqbwx-z/MHEbRKxsOs2_UbXaXb.jpg https://streaming.open.video/contents/pUrggBqbwx-z/1791118487/index.m3u8 https://open.video/embed?contentId=MHEbRKxsOs2 37 https://open.video/@cadland/v/scatter-30-bushes-in-autocad-with-yqarch-mtx Scatter 30 Bushes in AutoCAD with YQArch MTX Copying 30 bushes one by one in AutoCAD? YQArch MTX scatters a block inside a closed circle. In this video we place 30 bushes in one go. Learn: why COPY click-by-click is slow, how MTX fills a circle, and how to set the count to 30. Manual: COPY, click inside the circle, repeat x30 Faster: MTX, select bush, select circle, 30 This video uses AutoCAD 2021 with centimeters as the drawing unit. YQArch is a plugin, not a native AutoCAD command. The interface and available options may vary depending on your installed version, language, selected style, and unit configuration. Always verify the final placement before saving your project. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/p8jsknaq3x3A/MrEbQK2cPc2_nCOnER.jpg https://streaming.open.video/contents/p8jsknaq3x3A/1791118492/index.m3u8 https://open.video/embed?contentId=MrEbQK2cPc2 31 https://open.video/@cadland/v/autocad-room-area-in-one-click-with-yqarch-mj AutoCAD Room Area in One Click with YQArch MJ Need room area in AutoCAD without clicking every vertex? The YQArch MJ command calculates the area of a closed space from a single pick point and places the m² label on the plan. In this video we pick inside a 400 x 500 cm room and get 20 m² on the drawing. In this video, youll learn: How to use MJ Pick Point inside a closed area Why native AREA stays in the command line as cm² How MJ writes the area in m² on the floor plan How one click replaces vertex picking + TEXT This video uses AutoCAD 2021 with centimeters as the drawing unit. YQArch is a plugin, not a native AutoCAD command. The interface and available options may vary depending on your installed version, language, selected style, and unit configuration. Always verify the final area before saving your project. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/k4rsdnHbYt_X/gHFWlKxtPs2_YWxqgn.jpg https://streaming.open.video/contents/k4rsdnHbYt_X/1791118486/index.m3u8 https://open.video/embed?contentId=gHFWlKxtPs2 30 https://open.video/@cadland/v/offset-autocad-walls-in-one-command-with-yqarch-wwo Offset AutoCAD Walls in One Command with YQArch WWO Still offsetting walls one line at a time in AutoCAD? The YQArch WWO (Wall Offsetting) command creates a parallel wall at a set distance in one step, keeping the wall clean and connected. In this video we offset a 20 cm wall by 300 cm. In this video, youll learn: How to draw a simple wall (wall thickness 20 cm) How to offset a wall manually with OFFSET and re-trim How to use YQArch WWO to create a parallel wall at once How the new wall keeps its thickness and connections Manual workflow: Select Wall Line OFFSET Re-trim Repeat Faster workflow: YQArch WWO Pick Wall Set Distance This video uses AutoCAD 2021 with centimeters as the drawing unit. YQArch is a plugin, not a native AutoCAD command. The interface and available options may vary depending on your installed version, language, selected style, and unit configuration. Always verify the final wall position and intersections before saving your project. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/oDioppKz7x3Y/gH_GQ03cOt2_XZWlLu.jpg https://streaming.open.video/contents/oDioppKz7x3Y/1791118613/index.m3u8 https://open.video/embed?contentId=gH_GQ03cOt2 32 https://open.video/@cadland/v/place-objects-at-equal-spacing-with-autocad-measure Place Objects at Equal Spacing with AutoCAD MEASURE Still placing objects one by one along a wall in AutoCAD? The AutoCAD MEASURE command places a block at equal distances along a line or polyline in one step perfect for columns, windows, fixtures, or parking along a wall. In this video we space objects every 200 cm. In this video, youll learn: How to set the spacing to 200 cm How to place objects manually with COPY and align, one by one How to use MEASURE to place all objects at once with equal spacing How the insertion point and rotation follow the line Manual workflow: Copy Align Repeat for every object Faster workflow: AutoCAD MEASURE Pick Line Set Spacing This video uses AutoCAD 2021 with centimeters as the drawing unit. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/pFaQdjrj7pvB/grEHluwYOd2_wnKHai.jpg https://streaming.open.video/contents/pFaQdjrj7pvB/1791118618/index.m3u8 https://open.video/embed?contentId=grEHluwYOd2 34 https://open.video/@cadland/v/create-a-complete-autocad-stair-plan-with-yqarch-ltj Create a Complete AutoCAD Stair Plan with YQArch LTJ Still drawing every stair step by hand in AutoCAD? The YQArch LTJ (Plan of Staircase) command draws a complete stair plan steps, landing, and run direction from a few parameters in one command. In this video we use a 130 cm wide stair with 16 steps. In this video, youll learn: How to set the stair width to 130 cm and 16 steps How to draw a stair manually with LINE and RECTANGLE, one step at a time How to use YQArch LTJ to draw the full stair plan at once How the landing and run direction are added automatically Manual workflow: Offset Repeat Trim Faster workflow: YQArch LTJ Set Width + Steps Stair Plan Placed This video uses AutoCAD 2021 with centimeters as the drawing unit. YQArch is a plugin, not a native AutoCAD command. The interface and available options may vary depending on your installed version, language, selected style, and unit configuration. Always verify the final stair dimensions before saving your project. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/izeQlpeqBB-A/hqEHk0xdid2_VfupCc.jpg https://streaming.open.video/contents/izeQlpeqBB-A/1791118613/index.m3u8 https://open.video/embed?contentId=hqEHk0xdid2 33 https://open.video/@cadland/v/resize-autocad-doors-and-windows-with-yqarch-cw Resize AutoCAD Doors and Windows with YQArch CW Still deleting and reinserting AutoCAD doors and windows just to change their width? The YQArch CW command resizes existing doors and windows while automatically repairing the surrounding wall opening. In this video, youll learn: How to resize a door from 90 cm to 100 cm How to resize a window from 120 cm to 180 cm How Left, Center, and Right selection controls which position stays fixed Manual workflow: Delete Repair Wall Reinsert Reposition Faster workflow: YQArch CW Select Door or Window Choose New Width This video uses AutoCAD 2021 with centimeters as the drawing unit. YQArch is a plugin, not a native AutoCAD command. The interface and available options may vary depending on your installed version, language, selected style, and unit configuration. Always verify the final width and wall repair before saving your project. If this saved you time, subscribe for a new command every day. LINKS YQArch (free) official download link on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/lbyYknjqFlmY/VqFWlf3ZjJ2_DPfZOD.jpg https://streaming.open.video/contents/lbyYknjqFlmY/1791120212/index.m3u8 https://open.video/embed?contentId=VqFWlf3ZjJ2 49 https://open.video/@cadland/v/change-every-autocad-wall-thickness-at-once-with-yqarch-wwt Change Every AutoCAD Wall Thickness at Once with YQArch WWT Still changing wall thickness one wall at a time in AutoCAD? The YQArch WWT (Change Wall Thickness) command updates the thickness of every selected wall in one step and keeps the intersections clean. In this video we change a 10 cm wall plan to 20 cm. In this video, youll learn: How to draw a simple wall plan (wall thickness 10 cm) How to change wall thickness manually with OFFSET and re-trim How to select all walls and let YQArch apply the new thickness at once How intersections stay clean after the change Manual workflow: Select Wall OFFSET Delete Old Re-trim Repeat for every wall Faster workflow: YQArch WWT Select Walls Enter New Thickness This video uses AutoCAD 2021 with centimeters as the drawing unit. YQArch is a plugin, not a native AutoCAD command. The interface and available options may vary depending on your installed version, language, selected style, and unit configuration. Always verify the final wall thickness and intersections before saving your project. If this saved you time, subscribe for a new command every day. LINKS The YQArch plugin (free) and the full CAD command PDF are both available to download on our site: https://cadland.pages.dev Full tutorials: @CADlandSS TikTok: @cad.land Instagram: @cadlandtutorial YQArch AutoCAD CADTutorials Architecture Drafting CADLand https://video-meta.open.video/poster/lMqYsl4j7hoW/pb-XQL2YjJ2_xeKvQJ.jpg https://streaming.open.video/contents/lMqYsl4j7hoW/1791120339/index.m3u8 https://open.video/embed?contentId=pb-XQL2YjJ2 30 https://open.video/@cadland/v/draw-autocad-walls-10x-faster-with-yqarch-xww Draw AutoCAD Walls 10x Faster with YQArch XWW Still drawing walls with the LINE command in AutoCAD? The YQArch XWW (Smart Wall) command creates walls 10x faster with automatic thickness. Example setup: Wall Thickness: 20 cm Grid: 50x50 cm Workflow: YQArch XWW Click start point Drag to end Wall created with correct thickness Benefits: - Automatic 20 cm thickness - Snap to grid - 10x faster than LINE command - Perfect for floor plans This is a YQArch plugin workflow, not a native AutoCAD command. Works best with YQArch layer system. Download YQArch Plugin (Free) from our site: https://cadland.pages.dev/yqarch-install.html Download FREE AutoCAD Commands Cheat Sheet (PDF) from our site: https://cadland.pages.dev/CADLandAutoCADCheatSheet.pdf Always test the command on a copy of your drawing. Subscribe to CAD LAND for practical AutoCAD and YQArch architectural workflows. AutoCAD YQArch SmartWall AutoCADArchitecture CADLand AutoCADTips Architecture CADPlugin Productivity https://video-meta.open.video/poster/pYi2tF9r_loz/pb_al1xJjJ2_dohIdG.jpg https://streaming.open.video/contents/pYi2tF9r_loz/1791120338/index.m3u8 https://open.video/embed?contentId=pb_al1xJjJ2 44 https://open.video/@cadland/v/place-16-autocad-columns-at-once-with-yqarch-zzbz Place 16 AutoCAD Columns at Once with YQArch ZZBZ Need to place AutoCAD columns at every grid intersection without inserting them one by one? In this YQArch workflow, the structural grid is first created with the ZXW command using centimeter-based axis spacing. X-axis spacing: 400 cm 400 cm 500 cm Y-axis spacing: 300 cm 300 cm 600 cm The completed grid is duplicated to compare two column-placement methods. Manual method: Use YQArch ZZR and place a column separately at each grid intersection. Automated method: Use YQArch ZZBZ, apply the required column settings, select all grid axes, and place columns across the complete grid automatically. Grid result: 4 vertical axes 4 horizontal axes 16 intersections 16 columns Command workflow: ZXW Enter Grid Spacing Copy the Grid Manual: ZZR Place Columns One by One Automated: ZZBZ Set Column Properties Select All Grid Axes Enter This is a YQArch plugin workflow, not a native AutoCAD command. The interface, column settings, fill options, and shortcut commands may vary depending on the installed YQArch version and language configuration. YQArch official information and download page: http://yqarch.cn/yqarch.asp This video uses: AutoCAD 2021 Drawing Unit: Centimeters YQArch Plugin Always verify the number of detected intersections, column dimensions, fill state, axis layers, and drawing units before using the result in a structural or architectural project. Subscribe to CAD LAND for practical AutoCAD and YQArch automation workflows. AutoCAD YQArch ZZBZ AutoCADColumns StructuralGrid CADLand https://video-meta.open.video/poster/jGqclnnjBhgr/pXFbkuxJiI2_PNnsfc.jpg https://streaming.open.video/contents/jGqclnnjBhgr/1791120340/index.m3u8 https://open.video/embed?contentId=pXFbkuxJiI2 32 https://open.video/@cadland/v/autocad-chamfer-cut-corners-to-exact-distances AutoCAD CHAMFER: Cut Corners to Exact Distances Still measuring, trimming, and drawing diagonal lines just to create one precise corner cut? AutoCAD CHAMFER creates an exact bevel between two lines using specified distance or angle values. Example: Distance 1: 20 cm Distance 2: 20 cm Command sequence: CHAMFER Distance 20 20 Select First Line Select Second Line The result is a precise 20 20 cm chamfer without manually measuring points, trimming both lines, or drawing the diagonal segment. Important: When the two chamfer distances are different, the first value is applied to the first selected object and the second value to the second selected object. This workflow is compatible with AutoCAD 2021. Subscribe to CAD LAND for precise AutoCAD commands without unnecessary drafting steps. AutoCAD CHAMFER AutoCAD2021 CADTips CADLand https://video-meta.open.video/poster/OKaMAjjq-dN7/VX_HQf2IjI2_PuVloc.jpg https://streaming.open.video/contents/OKaMAjjq-dN7/1791120346/index.m3u8 https://open.video/embed?contentId=VX_HQf2IjI2 32 https://open.video/@cadland/v/move-rotate-and-scale-faster-with-autocad-mocoro Move, Rotate and Scale Faster with AutoCAD MOCORO Use AutoCAD MOCORO to move, rotate, and scale the same object without restarting three separate commands. MOCORO keeps the selected object active while you switch between multiple modification actions, reducing repeated selections during furniture, block, and equipment placement. Command sequence: MOCORO Select Object Pick Base Point Move Rotate Scale This AutoCAD Express Tool is useful for architectural layouts, furniture arrangements, block editing, and repetitive object modification. Important: MOCORO is an Express Tool. Availability may depend on your AutoCAD product and installation. Subscribe to CAD LAND for practical AutoCAD commands and faster drafting workflows. AutoCAD MOCORO AutoCADTips CADShortcuts CADLand https://video-meta.open.video/poster/SZzUllmq-lCs/VXEqk0xtPI2_gSdJhJ.jpg https://streaming.open.video/contents/SZzUllmq-lCs/1791120462/index.m3u8 https://open.video/embed?contentId=VXEqk0xtPI2 35 https://open.video/@cadland/v/turn-a-3d-autocad-model-into-a-2d-drawing Turn a 3D AutoCAD Model into a 2D Drawing! Need a flat 2D drawing from a 3D AutoCAD model? Use the FLATTEN command to project selected 3D geometry onto the current viewing plane. The result is a 2D representation based on the view you select before running the command. Command sequence: Select the Required View FLATTEN Select 3D Geometry Enter Choose Yes when asked about hidden lines if you want a cleaner visible-line projection. Choose No if you need all projected edges. Important: FLATTEN removes the depth of the selected geometry. Work on a copy if you need to preserve the original 3D model. Subscribe to CAD LAND for practical AutoCAD commands and workflow shortcuts. AutoCAD FLATTEN AutoCAD3D AutoCAD2D CADLand https://video-meta.open.video/poster/4piUFfqawFwZ/MX2zQLwIPs2_CMbfeX.jpg https://streaming.open.video/contents/4piUFfqawFwZ/1791122796/index.m3u8 https://open.video/embed?contentId=MX2zQLwIPs2 27 https://open.video/@cadland/v/crop-any-autocad-xref-without-editing-it Crop Any AutoCAD Xref Without Editing It! Need to display only one part of a large Xref or block in AutoCAD? Use the XCLIP command to create a custom clipping boundary. Everything outside the selected boundary is hidden while the original Xref remains unchanged. Command sequence: XCLIP Select Xref or Block New Boundary Rectangular Pick Two Corners Use XCLIP to create cleaner plans, details, layouts, and presentation drawings without modifying the original reference file. Subscribe to CAD LAND for practical AutoCAD commands and workflow shortcuts. AutoCAD XCLIP AutoCADXref CADTips CADLand https://video-meta.open.video/poster/_peAFfvjYl0r/gXxyQfwIPs2_UwSvJT.jpg https://streaming.open.video/contents/_peAFfvjYl0r/1791122797/index.m3u8 https://open.video/embed?contentId=gXxyQfwIPs2 36 https://open.video/@cadland/v/fix-every-wrong-autocad-property-at-once Fix Every Wrong AutoCAD Property at Once! Are your AutoCAD objects using random colors, linetypes, and lineweights instead of following their layer settings? Stop fixing object properties one-by-one. The SETBYLAYER command resets selected property overrides and makes the objects follow their assigned layer settings again. Command sequence: SETBYLAYER Select Objects Enter Yes Yes Use this command to clean inconsistent drawings and restore a proper ByLayer workflow. Subscribe to CAD LAND for practical AutoCAD commands and workflow shortcuts. AutoCAD SETBYLAYER AutoCADLayers CADTips CADLand https://video-meta.open.video/poster/yPawgbbjsF36/NG3Pkf2sPd2_XcBkJx.jpg https://streaming.open.video/contents/yPawgbbjsF36/1791122936/index.m3u8 https://open.video/embed?contentId=NG3Pkf2sPd2 35 https://open.video/@cadland/v/replace-every-autocad-block-at-once Replace Every AutoCAD Block at Once! Still replacing old AutoCAD blocks one-by-one? The BLOCKREPLACE command searches the drawing for a specified block and replaces every instance with another block. In this example, all old chair blocks are replaced with a new chair design in one operation. Command sequence: BLOCKREPLACE Select Original Block Select Replacement Block OK Make sure the original and replacement blocks have correctly positioned insertion points before running the command. Subscribe to CAD LAND for practical AutoCAD commands and workflow shortcuts. AutoCAD BLOCKREPLACE AutoCADBlocks CADTips CADLand https://video-meta.open.video/poster/4QCktfryxx0W/NWwiRu3YPs2_GzXhfY.jpg https://streaming.open.video/contents/4QCktfryxx0W/1791122924/index.m3u8 https://open.video/embed?contentId=NWwiRu3YPs2 35 https://open.video/@cadland/v/this-autocad-area-text-updates-itself This AutoCAD Area Text Updates Itself! Manually typing room areas in AutoCAD creates a serious problem. When the room boundary changes, the text stays the same and displays an incorrect value. Use the FIELD command to link the area label directly to a closed polyline. After modifying the boundary, run REGEN and the area value updates from the linked geometry. Command sequence: FIELD Object Select Polyline Area Place Field After changing the boundary: REGEN Subscribe to CAD LAND for practical AutoCAD commands and workflow shortcuts. AutoCAD FIELD AreaCalculation CADTips CADLand https://video-meta.open.video/poster/BQugAvHrYd0A/hq2PRuxZOd2_aTqMKL.jpg https://streaming.open.video/contents/BQugAvHrYd0A/1791122935/index.m3u8 https://open.video/embed?contentId=hq2PRuxZOd2 73 https://open.video/@cadland/v/measure-multiple-autocad-rooms-in-one-selection Measure Multiple AutoCAD Rooms in One Selection Still running AREA separately for every room and adding the results manually? MEASUREGEOM Quick lets you select multiple enclosed spaces with Shift + Click and displays their cumulative area and total perimeter. Example: Room 1: 200,000 cm² Room 2: 120,000 cm² Cumulative Total: 320,000 cm² Command sequence: MEASUREGEOM Quick Click First Room Shift + Click Additional Rooms This drawing uses centimeters, so the result is displayed in square centimeters. Conversion: 320,000 cm² 10,000 = 32.00 m² Important: Every selected room must be fully enclosed and visible in Plan View. Small boundary gaps can prevent area detection. Subscribe to CAD LAND for precise AutoCAD workflows without repetitive calculations. AutoCAD MEASUREGEOM AutoCADArea CADTips CADLand https://video-meta.open.video/poster/8QuItbqjZB-7/hGwzRL2ZOd2_ZnkAjF.jpg https://streaming.open.video/contents/8QuItbqjZB-7/1791122925/index.m3u8 https://open.video/embed?contentId=hGwzRL2ZOd2 42 https://open.video/@cadland/v/make-autocad-text-readable-with-wipeout Make AutoCAD Text Readable with WIPEOUT Need a clean and readable label inside a busy AutoCAD drawing? Use WIPEOUT to mask the geometry behind your text without trimming, deleting, or modifying the original drawing objects. Command sequence: Draw a Closed Polyline WIPEOUT Polyline Select the Boundary The new wipeout may temporarily cover the existing text. To restore the label above the mask: Select the Text DRAWORDER Front Then hide the wipeout boundary: WIPEOUTFRAME 0 The result is a clean and readable annotation while the original background geometry remains unchanged behind the wipeout. Use this workflow for room labels, area values, dimensions, equipment tags, and technical notes placed over dense plans or hatch patterns. Subscribe to CAD LAND for clean and practical AutoCAD documentation workflows. AutoCAD WIPEOUT DRAWORDER AutoCADText CADLand https://video-meta.open.video/poster/56akBbqjwx8t/Nax4ke3IPc2_nCvzzJ.jpg https://streaming.open.video/contents/56akBbqjwx8t/1791122923/index.m3u8 https://open.video/embed?contentId=Nax4ke3IPc2 29 https://open.video/@cadland/v/stop-drawing-autocad-walls-twice Stop Drawing AutoCAD Walls Twice Still drawing one wall line and applying OFFSET again and again to create the second side? MLINE creates multiple parallel lines from one cursor path, making it useful for walls, roads, pipes, insulation lines, and other parallel geometry. Example setup: Style: WALL Offsets: +0.5 and -0.5 Justification: Zero Scale: 20 Command sequence: MLINE Style WALL Justification Zero Scale 20 Draw the Path The resulting total width depends on the element offsets defined inside the multiline style. Verify the style before entering the scale value. Use MLEDIT when the multiline intersections and corners require additional cleanup. Subscribe to CAD LAND for practical AutoCAD workflows that eliminate repetitive drawing steps. AutoCAD MLINE AutoCADWalls CADTips CADLand https://video-meta.open.video/poster/FUmYorurwFEZ/Nb3ykK2djs2_CVKDOj.jpg https://streaming.open.video/contents/FUmYorurwFEZ/1791122930/index.m3u8 https://open.video/embed?contentId=Nb3ykK2djs2 34 https://open.video/@cadland/v/turn-a-2d-autocad-plan-into-3d-walls Turn a 2D AutoCAD Plan into 3D Walls Still modeling every AutoCAD wall as a separate 3D object? Create a closed 2D wall boundary and use PRESSPULL to turn the complete area into 3D solid walls with one extrusion height. Example: Wall Thickness: 20 Wall Height: 280 Command sequence: Switch to Isometric View PRESSPULL Select the Closed Wall Area Enter Your Number PRESSPULL creates a 3D solid when you select a closed object or a fully bounded area. Open objects create surfaces instead. Important: Make sure the boundary is closed, coplanar, and free from small gaps before running the command. Subscribe to CAD LAND for practical AutoCAD workflows with clear visual results. AutoCAD PRESSPULL AutoCAD3D 3DModeling CADLand https://video-meta.open.video/poster/y9icdh0jwh85/NbxPkvwtjs2_qgSCBQ.jpg https://streaming.open.video/contents/y9icdh0jwh85/1791122935/index.m3u8 https://open.video/embed?contentId=NbxPkvwtjs2 30 https://open.video/@cadland/v/save-selected-autocad-objects-as-a-separate-dwg Save Selected AutoCAD Objects as a Separate DWG Need to save only one room, detail, stair, equipment group, or drawing section from a large AutoCAD project? Use the WBLOCK command to export selected objects directly into a separate DWG file. Command sequence: WBLOCK Objects Pick Base Point Select Objects Retain Choose File Name Use Retain if you want the selected objects to remain in the original drawing. The new DWG file contains only the objects you selected, making it easier to share details, create a block library, or reuse project components. Subscribe to CAD LAND for practical AutoCAD commands and workflow shortcuts. AutoCAD WBLOCK DWG CADTips CADLand https://video-meta.open.video/poster/--igBxXa2h26/NH3PRLwsis2_GNHEQe.jpg https://streaming.open.video/contents/--igBxXa2h26/1791122931/index.m3u8 https://open.video/embed?contentId=NH3PRLwsis2 33 https://open.video/@cadland/v/stop-editing-autocad-text-one-line-at-a-time Stop Editing AutoCAD Text One Line at a Time Are your AutoCAD notes made from dozens of separate single-line text objects? Editing, moving, and formatting each line individually wastes time. Use the TXT2MTXT command to combine selected text objects into one editable multiline text object. Recommended settings: Combine into a Single MText Sort Top-Down Word Wrap Command sequence: TXT2MTXT Settings Select Text Objects Enter The result is one organized MText object that can be edited and formatted from a single text editor. Subscribe to CAD LAND for practical AutoCAD commands and workflow shortcuts. AutoCAD TXT2MTXT AutoCADText MText CADLand https://video-meta.open.video/poster/DBvMkvrrAFft/NX3zku2tOt2_GePdUJ.jpg https://streaming.open.video/contents/DBvMkvrrAFft/1791123004/index.m3u8 https://open.video/embed?contentId=NX3zku2tOt2 35 https://open.video/@cadland/v/place-blocks-evenly-along-any-autocad-curve Place Blocks Evenly Along Any AutoCAD Curve! Still copying and positioning trees, lights, or other blocks manually along a curved path in AutoCAD? Use the DIVIDE command with the Block option to place blocks at equal intervals along a line, arc, spline, circle, or polyline. Command sequence: DIVIDE Select Path Block Enter Block Name Align Yes Enter Number of Segments Important: DIVIDE does not physically break the selected path. It creates equal division locations and inserts blocks at the internal points. For example: 10 equal segments create 9 internal block locations. Subscribe to CAD LAND for practical AutoCAD commands and workflow shortcuts. AutoCAD DIVIDE AutoCADBlocks SitePlan CADLand https://video-meta.open.video/poster/5yi2ErLz6l3t/hXxylKxIOc2_ndgbdK.jpg https://streaming.open.video/contents/5yi2ErLz6l3t/1791123020/index.m3u8 https://open.video/embed?contentId=hXxylKxIOc2 28 https://open.video/@cadland/v/stop-exploding-autocad-blocks-use-ncopy Stop Exploding AutoCAD Blocks! Use NCOPY Stop exploding blocks or binding Xrefs just to copy one nested object in AutoCAD. The NCOPY command copies selected objects directly from a block, Xref, or DGN underlay into the current drawing. Select the nested object, choose a base point, and place the independent copy. The original reference remains unchanged. Command sequence: NCOPY Select Nested Object Enter Base Point Place Copy Subscribe to CAD LAND for practical AutoCAD commands and workflow shortcuts. AutoCAD NCOPY AutoCADBlocks Xref CADLand https://video-meta.open.video/poster/CCywkdbiBl-z/hbxikL3IOc2_zKvovi.jpg https://streaming.open.video/contents/CCywkdbiBl-z/1791123019/index.m3u8 https://open.video/embed?contentId=hbxikL3IOc2 41 https://open.video/@cadland/v/fit-any-block-to-exact-size-instantly-autocad-scale-hack Fit Any Block to Exact Size Instantly (AutoCAD Scale Hack) Stop guessing decimal scale factors like 0.85 or 1.2 to fit your blocks into your drawings in AutoCAD. The SCALE (SC) command with the REFERENCE (R) option allows you to resize any block, car, furniture, or image to an exact physical dimension based on a known length. It guarantees 100% mathematical accuracy for your technical plans and saves you from manual calculations. Did you know about Scale Reference? Comment YES or NO! Subscribe to CAD Land for daily professional drafting hacks. AutoCAD CADLand CADShortcuts ScaleReference Drafting Engineering Architecture CADTips Design https://video-meta.open.video/poster/EiaUEtWbFd2z/NrxjRKxZOc2_DIPYkr.jpg https://streaming.open.video/contents/EiaUEtWbFd2z/1791123014/index.m3u8 https://open.video/embed?contentId=NrxjRKxZOc2 51 https://open.video/@cadland/v/stop-editing-autocad-texts-one-by-one Stop Editing AutoCAD Texts One-by-One! Are you still panning around your drawing, double-clicking, and manually re-typing dozens of identical text labels or room names in AutoCAD? Stop wasting your clicks on boring data entry. The FIND command is an absolute game-changer for bulk-editing text. By simply running FIND, entering your old text, entering your new text, and clicking Replace All, AutoCAD instantly updates every matching word across your entire project in less than a second. Work smart, draft fast. Did this text hack save your sanity today? Comment below! Subscribe to CAD Land for daily professional AutoCAD hacks. AutoCAD CADLand CADShortcuts FindAndReplace TextEditing Drafting Engineering Architecture CADTips Productivity Workflow https://video-meta.open.video/poster/FYaYdhSysteB/VGxzlK2tOI2_KWZqIp.jpg https://streaming.open.video/contents/FYaYdhSysteB/1791124422/index.m3u8 https://open.video/embed?contentId=VGxzlK2tOI2 41 https://open.video/@cadland/v/how-to-match-line-styles-in-1-second-autocad-magic-hack How to Match Line Styles in 1 Second (AutoCAD Magic Hack) Are you still selecting individual lines and manually changing their colors, layers, or linetypes in AutoCAD? Stop wasting your clicks on boring formatting. The MATCHPROP (MA) command is a game-changer. By simply running MA, clicking on your source template line, and selecting any other lines, you instantly copy and paste colors, linetypes, scales, and layers in less than a second. Work smart, draft fast. Did this command save you time today? Comment below! Subscribe to CAD Land for daily professional AutoCAD hacks. AutoCAD CADLand CADShortcuts MatchProperties LineStyles Drafting Engineering Architecture CADTips Design https://video-meta.open.video/poster/FGyIoxPzYdM5/VG2OQ1wZOI2_DlKMcw.jpg https://streaming.open.video/contents/FGyIoxPzYdM5/1791124417/index.m3u8 https://open.video/embed?contentId=VG2OQ1wZOI2 37 https://open.video/@cadland/v/stop-drawing-both-sides-of-your-plans Stop Drawing Both Sides of Your Plans! Are you still drawing both sides of symmetrical house facades, elevations, or plans manually in AutoCAD? You are losing valuable time trying to align windows and roof slopes. The MIRROR (MI) command is the ultimate architecture shortcut. By drawing only 50% of your facade (the left half) and mirroring it across a center axis, you instantly get a mathematically perfect, 100% symmetrical front elevation in just one click. Work smart, draft fast. What should we draw next? Comment below! Subscribe to CAD Land for daily professional AutoCAD hacks. AutoCAD CADLand CADShortcuts MirrorCommand Architecture HouseDesign Drafting Engineering CADTips Symmetry https://video-meta.open.video/poster/7KuYEv9aZleZ/VGx4RLxYOJ2_SVmoZH.jpg https://streaming.open.video/contents/7KuYEv9aZleZ/1791124422/index.m3u8 https://open.video/embed?contentId=VGx4RLxYOJ2 33 https://open.video/@cadland/v/how-to-capitalize-100-texts-in-1-second-autocad-text-hack How to Capitalize 100 Texts in 1 Second (AutoCAD Text Hack) Did your client or boss ask you to change all your lowercase drawing labels to UPPERCASE? Stop double-clicking and re-typing every single word manually. The TCASE (Change Case) command is a hidden Express Tools gem in AutoCAD. By simply selecting all your text blocks, running TCASE, and selecting UPPERCASE, you can instantly transform hundreds of words in less than a second. Work smart, draft fast. Did you know about the TCASE command? Comment YES or NO! Subscribe to CAD Land for daily professional AutoCAD hacks. AutoCAD CADLand CADShortcuts TcaseCommand TextEditing Drafting Engineering Architecture CADTips Productivity https://video-meta.open.video/poster/7GCAdhziYxS7/VG3yl03JPJ2_aWvYcM.jpg https://streaming.open.video/contents/7GCAdhziYxS7/1791124416/index.m3u8 https://open.video/embed?contentId=VG3yl03JPJ2 31 https://open.video/@cadland/v/stop-searching-for-hatch-gaps-in-autocad Stop Searching for Hatch Gaps in AutoCAD! Are you still zooming in endlessly to find that tiny 0.1mm open gap just because AutoCAD refuses to hatch your drawing? You are losing time. The HPGAPTOL (Hatch Gap Tolerance) command is a lifesaver. By changing this value from 0 to 5 (or higher), you tell AutoCAD to ignore small gaps and hatch open boundaries seamlessly anyway. No more manual line joining! Did this command save your sanity today? Comment below! Subscribe to CAD Land for daily professional AutoCAD hacks. AutoCAD CADLand CADShortcuts HatchCommand HatchError Drafting Engineering Architecture CADTips Automation https://video-meta.open.video/poster/EHncFt9j2FE4/Vq3PRu3ZOY2_RvxCpl.jpg https://streaming.open.video/contents/EHncFt9j2FE4/1791124547/index.m3u8 https://open.video/embed?contentId=Vq3PRu3ZOY2 33 https://open.video/@cadland/v/autocad-polygon-multiple-offset-command-tutorial AutoCAD Polygon & Multiple Offset Command Tutorial Are you still drawing triangles with the LINE command and offsetting them inward one-by-one? Stop wasting time with crooked lines and slow drafting methods. Using the POLYGON (POL) command with 3 sides ensures a mathematically perfect equilateral triangle instantly. Combine this with the MULTIPLE (M) option inside the OFFSET command to throw nested shapes inward with just one single click per offset. Work smart, draft fast. Which method do you use more? Comment LINE or POLYGON! Subscribe to CAD Land for daily professional drafting hacks. AutoCAD CADLand CADShortcuts PolygonCommand OffsetMultiple Drafting Engineering Architecture CADTips https://video-meta.open.video/poster/BXjQdt5rsd-Y/VXx5lewdPJ2_DKkszd.jpg https://streaming.open.video/contents/BXjQdt5rsd-Y/1791124548/index.m3u8 https://open.video/embed?contentId=VXx5lewdPJ2 40 https://open.video/@cadland/v/stop-deleting-autocad-lines-one-by-one Stop Deleting AutoCAD Lines One-by-One! Stop wasting time selecting dozens of dimensions, layers, or texts individually just to clean up your AutoCAD drawing. The LAYISO (Layer Isolate) command allows you to lock or hide all layers except the ones you select. This lets you edit, move, or delete hundreds of objects instantly without affecting the rest of your design. Type LAYUNISO to bring everything back instantly. What is your biggest time-waste in AutoCAD? Comment below! Subscribe to CAD Land for daily professional drafting workflows. AutoCAD CADLand CADShortcuts Layiso LayerManagement Drafting Engineering Architecture CADTips Design https://video-meta.open.video/poster/4Xikcfj4-p1X/oPxiQuwZOt2_gemEYC.jpg https://streaming.open.video/contents/4Xikcfj4-p1X/1791125897/index.m3u8 https://open.video/embed?contentId=oPxiQuwZOt2 45 https://open.video/@cadland/v/stop-scaling-and-rotating-manually-in-autocad-autocad-cadland Stop Scaling and Rotating Manually in AutoCAD! autocad cadland Stop using Move, Rotate, and Scale separately just to fit a bathtub or furniture block into a corner in AutoCAD. The ALIGN (AL) command is the ultimate CAD hack. It moves, rotates, and scales your objects simultaneously based on two destination points. It guarantees absolute mathematical precision without manual math. Did you know about the Align command? Comment YES or NO! Subscribe to CAD Land for more daily AutoCAD workflow hacks. AutoCAD CADLand CADShortcuts AlignCommand Drafting Engineering Architecture CADTips https://video-meta.open.video/poster/A1mgwbCX6B2Z/UP3ilLwZPs2_fDfhJR.jpg https://streaming.open.video/contents/A1mgwbCX6B2Z/1791125890/index.m3u8 https://open.video/embed?contentId=UP3ilLwZPs2 34 https://open.video/@cadland/v/stop-copying-chairs-around-tables-in-autocad-autocad Stop Copying Chairs Around Tables in AutoCAD! autocad Are you still copying and rotating chairs manually around a circular table in AutoCAD? Stop wasting time with amateur methods that result in uneven angles. The POLAR ARRAY (AR) command allows you to distribute any object perfectly and symmetrically around a center point in just one click. It keeps your drawing professional, organized, and easy to edit later. Which method do you use? Comment AMATEUR or PRO! Subscribe to CAD Land for more daily AutoCAD workflow hacks. AutoCAD CADLand CADShortcuts ArrayCommand Drafting Engineering Architecture CADTips https://video-meta.open.video/poster/CHmEFhmW_hu6/o535QexJPs2_ERCYcd.jpg https://streaming.open.video/contents/CHmEFhmW_hu6/1791125889/index.m3u8 https://open.video/embed?contentId=o535QexJPs2 30 https://open.video/@cadland/v/stretching-messi-into-ronaldo-in-autocad Stretching Messi into Ronaldo in AutoCAD! Are you still using MOVE and EXTEND separately to make objects longer in AutoCAD? You are wasting time. The STRETCH (S) command allows you to scale, extend, and move vertices of any block or drawing simultaneously without breaking the geometry. In this video, we draw a Minecraft-style Messi character and use the Stretch tool to instantly transform him into Ronaldo height. Learn how to draft like a professional. Who is your GOAT? Comment Messi or Ronaldo! Subscribe to CAD Land for daily creative CAD hacks. AutoCAD CADLand CADShortcuts StretchCommand Messi Ronaldo Engineering Drafting Minecraft CAD https://video-meta.open.video/poster/71aohv54_B1r/pOwyluwcic2_TjKKGv.jpg https://streaming.open.video/contents/71aohv54_B1r/1791125896/index.m3u8 https://open.video/embed?contentId=pOwyluwcic2 41 https://open.video/@cadland/v/levels-of-offsetting-in-autocad-noob-vs-pro Levels of Offsetting in AutoCAD (Noob vs. Pro) Are you still drawing concentric offsets the beginner way? This video compares 3 levels of AutoCAD drafting efficiency: Level 1: Offsetting single lines and manually trimming the overlapping corners (Slow). Level 2: Merging lines using the JOIN command, then offsetting them inward (Fast). Level 3 (PRO): Using the BOUNDARY command inside a complex floor plan to create instant closed polylines and offsetting the entire space in 1 click (Instant). Stop doing manual work. Work smart, draft fast. Which AutoCAD level are you? Comment Level 1, Level 2 or Level 3! Subscribe to CAD Land for daily CAD hacks and professional tutorials. AutoCAD CADLand CADShortcuts OffsetCommand JoinCommand BoundaryCommand Engineering Architecture Drafting https://video-meta.open.video/poster/Byqcctm4Ytwy/ViwylewZPs2_upxOkf.jpg https://streaming.open.video/contents/Byqcctm4Ytwy/1791126008/index.m3u8 https://open.video/embed?contentId=ViwylewZPs2 51 https://open.video/@cadland/v/stop-joining-lines-manually-in-autocad-fillet-hack Stop Joining Lines Manually in AutoCAD! (Fillet Hack) Stop wasting time drawing arcs or manual lines to connect corners in AutoCAD. The FILLET (F) command is the ultimate shortcut to join two lines instantly or create perfect rounded corners using the RADIUS option. Whether you need a sharp 90-degree corner (Radius = 0) or a smooth, rounded edge, this quick tutorial shows you how to master the Fillet and Radius tools in seconds. Do you use Fillet with Radius 0 to join lines? Comment YES or NO below! Subscribe to CAD Land for daily CAD hacks. AutoCAD CADLand CADShortcuts FilletCommand Radius Drafting Engineering 3DModeling https://video-meta.open.video/poster/9yaoErnPYtD4/V4wOku3JPd2_uXeSWO.jpg https://streaming.open.video/contents/9yaoErnPYtD4/1791126008/index.m3u8 https://open.video/embed?contentId=V4wOku3JPd2 47 https://open.video/@cadland/v/stop-drawing-rectangles-with-line-in-autocad Stop Drawing Rectangles with LINE in AutoCAD! Are you still drawing rectangles side-by-side using the LINE command? Stop wasting time. Using the RECTANGLE (REC) command in AutoCAD is not only faster, but it also creates a single closed polylinemaking it much easier to offset, hatch, or extrude later. Which command do you use more? Comment LINE or REC below! Subscribe to CAD Land for daily CAD hacks. AutoCAD CADLand CADShortcuts 3DModeling Drafting Engineering CADTips https://video-meta.open.video/poster/zUewwB1z_Ff6/hWEjlKwcPY2_qDoFLe.jpg https://streaming.open.video/contents/zUewwB1z_Ff6/1791127420/index.m3u8 https://open.video/embed?contentId=hWEjlKwcPY2 39